これはサポート終了製品 (EOL) です。最新の代替品を参照してください。 これはサポート終了製品 (EOL) です。最新の代替品を参照してください。
代替品を表示
2ED1324S12P
生産終了
生産終了
RoHS対応
鉛フリー

2ED1324S12P

生産終了
1200 V half-bridge gate driver IC with AMC (Active Miller Clamp), SCC (Short Circuit Clamp)

Content could not be loaded

Unfortunately, we were unable to load the content for this section. You may want to refresh the page or try again later.

2ED1324S12P
2ED1324S12P


製品仕様情報

  • VBS UVLO (Off)
    11.3 V
  • VBS UVLO (On)
    12.2 V
  • VCC UVLO (Off)
    11.3 V
  • VCC UVLO (On)
    12.2 V
  • コンフィギュレーション
    Half-Bridge
  • チャネル
    2
  • 伝搬遅延オフ
    500 ns
  • 伝搬遅延オン
    500 ns
  • 入力 Vcc (最小)
    13 V
  • 出力電流 (Source)
    2.3 A
  • 出力電流 (Sink)
    2.3 A
  • 絶縁方式
    Functional levelshift SOI (Silicon On Insulator)
  • 製品名
    2ED1324S12P
  • 認定
    Industrial
  • 電圧クラス
    1200 V

OPN
2ED1324S12PXUMA1
製品ステータス discontinued
インフィニオン パッケージ
パッケージ名 N/A
梱包サイズ 1000
梱包形態 TAPE & REEL
MSL (湿度感受性レベル) 3
防湿梱包 DRY
鉛フリー Yes
ハロゲンフリー Yes
RoHS対応 Yes
組立国
ID
ウェハ製造国
MY

製品ステータス discontinued
インフィニオン パッケージ
パッケージ名 -
梱包サイズ 1000
梱包形態 TAPE & REEL
MSL (湿度感受性レベル) 3
防湿梱包 DRY
鉛フリー
ハロゲンフリー
RoHS準拠
組立国
ID
ウェハ製造国
MY
EiceDRIVER™ 1200 V half-bridge gate driver IC with 2.3 A source, 2.3 A sink current and cross conduction prevention in the sufficient creepage, clearance distance DSO-20 (300mils) package for 1200 V SiC MOSFET and IGBT power devices. The 2ED1324S12P supports Active Miller Clamp (AMC), Short Circuit Clamp (SCC) and Cross conduction prevention for the best in class switching performance in the sufficient creepage/clearance distance package DSO-20. Based on the used SOI-technology there is an excellent ruggedness on transient voltages. Since the device contains no parasitic thyristor structures, the design is very robust against parasitic latch up across the operating temperature and voltage range.

特長

  • Unique thin-film (SOI)-technology
  • Floating channel for bootstrap op.
  • Max. boots. volt. (VB node) +1225 V
  • Operating voltages < + 1200 V
  • Negative VS transient vol. immunity
  • 2.3 A/2.3 A peak output source/sink
  • Integrated over-current protection
  • ± 5% high accu. reference threshold
  • Less than 1 us over-current sens
  • Integrated Active Miller Clamp
  • Integr. short circuit clamp functi.
  • Integr. ultra-fast bootstrap diode

利点

  • Integrated over-current protection provides faster protection of the switch
  • Integrated active Miller clamp helps prevent parasitic turn-on
  • Integrated bootstrap diode means smaller PCB area and lower BOM
ドキュメント

設計リソース

開発者コミュニティ