Active and preferred
RoHS準拠
鉛フリー

BGS14WMA9

EA.
在庫あり

Content could not be loaded

Unfortunately, we were unable to load the content for this section. You may want to refresh the page or try again later.

BGS14WMA9
BGS14WMA9
EA.

Product details

  • Pmax max
    28 dBm
  • スイッチ タイプ
    SP4T
  • 制御インターフェース
    MIPI
  • 周波数範囲
    0.05 - 6.0 GHz
  • 挿入損失 (@1GHz)
    0.22 dB
  • 絶縁 (@1GHz)
    46 dB
  • 電源電圧
    1.65 - 1.95 V
OPN
BGS14WMA9E6327XTSA1
製品ステータス active and preferred
インフィニオンパッケージ
パッケージ名 N/A
包装サイズ 4500
包装形態 TAPE & REEL
水分レベル 1
モイスチャーパッキン NON DRY
鉛フリー Yes
ハロゲンフリー Yes
RoHS準拠 Yes
Infineon stock last updated:
EA. 在庫あり

製品ステータス
Active
インフィニオンパッケージ
パッケージ名 -
包装サイズ 4500
包装形態 TAPE & REEL
水分レベル 1
モイスチャーパッキン NON DRY
鉛フリー
ハロゲンフリー
RoHS対応
EA.
在庫あり
BGS14WMA9 is a Single Pole Four Throw (SP4T) diversity switch which is specifically designed for WLAN and Bluetooth applications in a very compact 9 pin package with very small size of only 1.1 x 1.1 mm2 and thickness of 0.55 mm. Any of the 4 ports can be used as termination of the diversity antenna handling up to 26 dBm. Unlike GaAs technology, external DC blocking capacitors at the RF ports are only required if DC voltage is applied externally.BGS14WMA9 RF switch is manufactured in Infineon’s patented MOS technology, offering the performance of GaAs with the economy and integration of conventional CMOS including the inherently higher ESD robustness.

機能

  • RF CMOS SP4T antenna diversity switch with power handling capability of up to 26 dBm
  • High switching speed
  • Suitable for WLAN and Bluetooth applications
  • 0.05 to 6.0 GHz coverage for FM Radio, LTE, LAA and 5G application
  • Low insertion loss and harmonics generation, high port to port isolation up to 6 GHz
  • Low current consumption
  • On chip control logic including ESD protection
  • Fully compatible with MIPI RFFE 2.1 standard operating in 1.65 to 1.95 V voltage range
  • Software programmable MIPI RFFE USID
  • USID swap feature
  • Small form factor of 1.1 x 1.1 mm2
  • No power supply blocking required
  • No decoupling capacitors required (Unless DC applied on RF lines)
  • 50 Ω termination enabling at isolation mode
  • High EMI robustness
  • RoHS and WEEE compliant package

ドキュメント

デザイン リソース

開発者コミュニティ

{ "ctalist":[ { "link" : "https://community.infineon.com/t5/forums/postpage/choose-node/true", "label" : "コミュニティに質問する", "labelEn" : "コミュニティに質問する" }, { "link" : "https://community.infineon.com/", "label" : "すべてのディスカッションを表示", "labelEn" : "すべてのディスカッションを表示" } ] }