REF_ICC80QSG_84W2_BPA
Active and preferred
RoHS対応

REF_ICC80QSG_84W2_BPA

84 W AC-DC reference design for e-bike battery charger
Application note
個.
在庫あり

Content could not be loaded

Unfortunately, we were unable to load the content for this section. You may want to refresh the page or try again later.

REF_ICC80QSG_84W2_BPA
REF_ICC80QSG_84W2_BPA
個.
Application note

製品仕様情報

  • Iout
    1 A
  • Iout 範囲
    0.2 A～2 A
  • Pout (最大)
    84 W
  • Vout
    DC
  • トポロジー
    Flyback
  • 入力タイプ
    AC
  • 入力電圧 範囲
    176 V～264 V
  • 入力電圧
    230 V
  • 出力電圧 範囲
    6 V～42 V
  • 出力電圧
    24 V
  • 周波数 (最大)
    60 kHz
  • 対象アプリケーション
    Charger
推奨
OPN
REFICC80QSG84W2BPATOBO1
製品ステータス active and preferred
インフィニオン パッケージ N/A
パッケージ名 N/A
梱包サイズ 1
梱包形態 CONTAINER
MSL (湿度感受性レベル) NA
防湿梱包 NON DRY
鉛フリー No
ハロゲンフリー No
RoHS対応 Yes
Infineon stock last updated:
 個. 在庫あり

製品ステータス
Active
インフィニオン パッケージ N/A
パッケージ名 -
梱包サイズ 1
梱包形態 CONTAINER
MSL (湿度感受性レベル) NA
防湿梱包 NON DRY
鉛フリー
ハロゲンフリー
RoHS準拠
個.
在庫あり
The REF_ICC80QSG_BPA2_84W is an 84 W flyback-based reference design tailor-made for battery chargers for e-bikes. It is based on the quasi-resonant flyback controller ICC80QSG and the renowned 700 V CoolMOS™ P7 technology in the small footprint and wave solderable SOT-223 package .

特長

  • Secondary-side regulation with adjustable CC output set-point from 0.2 A to 2 A
  • Supports wide output load range from 6 V to 42 V
  • Full-power efficiency more than 91 percent at 230 VRMS_AC input
  • Four-point average efficiency more than 91 percent at 42 V output load 
  • System standby power less than 200 mW at 230 VRMS_AC input

利点

  • High efficiency and low EMI with quasi-resonant (QR) valley switching
  • Cost-effective flyback MOSFET with high performance, using CoolMOS™ P7 in SOT-223 package
  • Configurable hysteresis of brown-in and brown-out
  • Adaptive brown-out level triggering based on bus voltage ripple, to better protect primary components from overheating and saturation with higher brown-out level at higher power transfer
  • Comprehensive set of protections: internal overtemperature protection (OTP), output overvoltage protection (OVP), VCC OVP, overcurrent protection (OCP), brown-in and brown-out protection, input OVP and open-loop protection

アプリケーション

Bill of Material

ドキュメント

デザイン リソース

パートナー ソリューション