BGSA402ML10

データシート

Content could not be loaded

Unfortunately, we were unable to load the content for this section. You may want to refresh the page or try again later.

BGSA402ML10
BGSA402ML10
データシート

製品仕様情報

  • サイズ
    1.1 x 1.5 mm²
  • スイッチ タイプ
    4xSPST
  • ハロゲンフリー
    Yes
  • 制御インターフェース
    MIPI 2.1
  • 周波数範囲
    0.4 - 6.0 GHz
OPN
製品ステータス
インフィニオンパッケージ
パッケージ名
包装サイズ
包装形態
水分レベル
モイスチャーパッキン
鉛フリー
ハロゲンフリー
RoHS準拠
Infineon stock last updated:
The BGSA402ML10 is a versatile shunt to ground 4xSingle-Pole Single-Throw (4xSPST) RF antenna tuning switch. It is optimized for low COFF as well as low RON enabling applications up to 6 GHz. The BGSA402ML10 is ideal for antenna tuning application. This chip integrates on-chip CMOS logic and power supply regulation. Its digital control interface is compliant with MIPI2.1 RFFE specification and each switch throw can be programmed individually or all together in the same RFFE command frame. Up to 2 instantiations of the same device can be controlled using the same RFFE bus thanks to its 2 states USID_Sel pin. Unlike GaAs technology, the 0.1 dB compression point exceeds the switch maximum input power level, resulting in excellent linear performance at all signal levels within the operating conditions. External DC blocking capacitors at the RF ports are only required if DC voltage is applied externally. Due to its high RF voltage ruggedness, it is suited for switching any reactive device such as inductor and capacitor in RF matching circuits without significant losses.

機能

  • Designed for high-linearity antenna aperture switching and RF tuning applications
  • Multiple selectable switch configurations
  • Ultra low RON resistance of 1.49 in ON state
  • Low COFF capacitance of 170 fF in OFF state
  • High RF operating voltage OFF state handling of >45 V
  • Low harmonic generation
  • MIPI RFFE 2.1 compliant control interface
  • Support 2 default USID via USID_Sel pin state
  • Supply voltage range: 1.65 to 3.6 V
  • No RF parameter change within supply voltage range
  • Small form factor 1.1 mm x 1.5 mm, MSL1, 260 C per JEDEC J-STD-020
  • RoHS and WEEE compliant package

用途

ドキュメント

ドキュメント

デザイン リソース

パートナー ソリューション

開発者コミュニティ

{ "ctalist":[ { "link" : "https://community.infineon.com/t5/forums/postpage/choose-node/true", "label" : "コミュニティに質問する", "labelEn" : "コミュニティに質問する" }, { "link" : "https://community.infineon.com/", "label" : "すべてのディスカッションを表示", "labelEn" : "すべてのディスカッションを表示" } ] }