Please note that this is an end of life product. See newer alternative product version Please note that this is an end of life product. See newer alternative product version
END OF LIFE
discontinued
RoHS Compliant
Lead-free

BGSA402ML10

END OF LIFE
Data Sheet
package

Content could not be loaded

Unfortunately, we were unable to load the content for this section. You may want to refresh the page or try again later.

BGSA402ML10
BGSA402ML10
Data Sheet

Product details

  • Control Interface
    MIPI 2.1
  • Frequency Range
    0.4 - 6.0 GHz
  • Halogen-free
    yes
  • Size
    1.1 x 1.5 mm²
  • Switch Type
    4xSPST
OPN
BGSA402ML10E6327XTSA1
Product Status discontinued
Infineon Package
TSLP-10-2
Package Name N/A
Packing Size 7500
Packing Type TAPE & REEL
Moisture Level 1
Moisture Packing NON DRY
Lead-free Yes
Halogen Free Yes
RoHS Compliant Yes
Infineon stock last updated:

Product Status discontinued
Infineon Package
TSLP-10-2
Package Name -
Packing Size 7500
Packing Type TAPE & REEL
Moisture Level 1
Moisture Packing NON DRY
Lead Free
Halogen Free
RoHS Compliant
The BGSA402ML10 is a versatile shunt to ground 4xSingle-Pole Single-Throw (4xSPST) RF antenna tuning switch. It is optimized for low COFF as well as low RON enabling applications up to 6 GHz. The BGSA402ML10 is ideal for antenna tuning application. This chip integrates on-chip CMOS logic and power supply regulation. Its digital control interface is compliant with MIPI2.1 RFFE specification and each switch throw can be programmed individually or all together in the same RFFE command frame. Up to 2 instantiations of the same device can be controlled using the same RFFE bus thanks to its 2 states USID_Sel pin. Unlike GaAs technology, the 0.1 dB compression point exceeds the switch maximum input power level, resulting in excellent linear performance at all signal levels within the operating conditions. External DC blocking capacitors at the RF ports are only required if DC voltage is applied externally. Due to its high RF voltage ruggedness, it is suited for switching any reactive device such as inductor and capacitor in RF matching circuits without significant losses.

Features

  • Designed for high-linearity antenna aperture switching and RF tuning applications
  • Multiple selectable switch configurations
  • Ultra low RON resistance of 1.49 in ON state
  • Low COFF capacitance of 170 fF in OFF state
  • High RF operating voltage OFF state handling of >45 V
  • Low harmonic generation
  • MIPI RFFE 2.1 compliant control interface
  • Support 2 default USID via USID_Sel pin state
  • Supply voltage range: 1.65 to 3.6 V
  • No RF parameter change within supply voltage range
  • Small form factor 1.1 mm x 1.5 mm, MSL1, 260 C per JEDEC J-STD-020
  • RoHS and WEEE compliant package

Applications

Documents

Documents

Design resources

Partner solutions

Developer community

{ "ctalist":[ { "link" : "https://community.infineon.com/t5/forums/postpage/choose-node/true", "label" : "Ask the community", "labelEn" : "Ask the community" }, { "link" : "https://community.infineon.com/t5/Forums/ct-p/products", "label" : "View all discussions", "labelEn" : "View all discussions" } ] }