アクティブで優先
RoHS準拠
鉛フリー

TLE9261BQX V33

The TLE9261-3BQX V33 belongs to Infineon´s Mid-Range+ SBC family and is designed for various CAN automotive applications

Content could not be loaded

Unfortunately, we were unable to load the content for this section. You may want to refresh the page or try again later.

TLE9261BQX V33
TLE9261BQX V33

Product details

  • Currently planned availability until at least
    2038
  • Wake-up Inputs
    Wake Pins, CAN
  • Standby Current
    44 μA (typ) Stop Mode
  • Transceiver
    1 x CAN FD ISO 11898 - 2
  • Family
    OPTIREG™ Mid-Range+ SBC
  • Transmission Rate max
    5 MBit/s
  • Output Drivers
    4 x High-Side Switch 150 mA
  • Green
    RoHS compliant, Halogen free
  • Voltage Regulator Output ((VCC1))
    3.3V / 250 mA
  • Voltage Regulator Output ((VCC2))
    5V / 100 mA
  • Voltage Regulator Output ((VCC3))
    3.3V or 1.8V / up to 400 mA
  • Quiescent Current
    15 μA (typ) Sleep Mode
OPN
TLE9261BQXV33XUMA2
製品ステータス active and preferred
インフィニオンパッケージ
パッケージ名 N/A
包装サイズ 2500
包装形態 TAPE & REEL
水分レベル 3
モイスチャーパッキン DRY
鉛フリー Yes
ハロゲンフリー Yes
RoHS準拠 Yes
Infineon stock last updated:

製品ステータス
Active
インフィニオンパッケージ
パッケージ名 -
包装サイズ 2500
包装形態 TAPE & REEL
水分レベル 3
モイスチャーパッキン DRY
鉛フリー
ハロゲンフリー
RoHS対応
TLE9261BQXV33 is a compact IC in VQFN-48 package. It supports automotive CAN bus applications as main supply and interface for microcontrollers. Features include voltage regulation, sensor supply protection, transistor driving, HS-CAN transceiver, high-side switches, and SPI control. It offers watchdog, Fail Outputs, undervoltage reset, low-power modes, and wake-up options. Designed for rugged automotive conditions.

機能

  • Very low quiescent current consumption in Stop- and Sleep Mode
  • Periodic Cyclic Wake in SBC Normal- and Stop Mode
  • Periodic Cyclic Sense in SBC Normal-, Stop- and Sleep Mode
  • Low-Drop Voltage Regulator 3.3V, 250mA
  • Low-Drop Voltage Regulator 5V, 100mA, protected features for off-board usage
  • Low-Drop Voltage Regulator, driving an external PNP transistor - 3.3V in load sharing configuration or 3.3V/1.8V in stand-alone configuration, protected features for off-board usage. Current limitation by shunt resistor (up to 350mA with 470mΩ external shunt resistor) in stand-alone configuration
  • High-Speed CAN Transceiver:
    – fully compliant to HS-CAN standard ISO 11898-2:2016
    – supporting CAN FD communication up to 5 Mbps
  • Fully compliant to “Hardware Requirements for LIN, CAN and FlexRay Interfaces in Automotive Applications” Revision 1.3, 2012-05-04
  • Four High-Side Outputs 7Ω typ.
  • Dedicated supply pin for High-Side Outputs
  • Two General Purpose High-Voltage In- and Outputs (GPIOs) configurable as add. Fail Outputs, Wake Inputs, Low-Side switches or High-Side switches
  • Three universal High-Voltage Wake Inputs for voltage level monitoring
  • Alternate High-Voltage Measurement Function, e.g. for battery voltage sensing
  • Configurable wake-up sources
  • Reset Output
  • Configurable timeout and window watchdog
  • Up to three Fail Outputs (depending on configuration)
  • Overtemperature and short circuit protection feature
  • Wide supply input voltage and temperature range
  • Software compatible to all SBC families TLE926x and TLE927x
  • Green Product (RoHS compliant) & AEC Qualified
  • PG-VQFN-48 leadless exposed-pad power package with Lead Tip Inspection (LTI) feature to support Automatic Optical Inspection (AOI)

ドキュメント

デザイン リソース

開発者コミュニティ

{ "ctalist":[ { "link" : "https://community.infineon.com/t5/forums/postpage/choose-node/true", "label" : "コミュニティに質問する", "labelEn" : "コミュニティに質問する" }, { "link" : "https://community.infineon.com/", "label" : "すべてのディスカッションを表示", "labelEn" : "すべてのディスカッションを表示" } ] }