Active and preferred
RoHS Compliant

TLS850C2TE V33

Automotive LDO, 500 mA, 3.3V, TO-252-5 (DPAK),always on, low Iq
Data Sheet
package
board
ea.
in stock

Content could not be loaded

Unfortunately, we were unable to load the content for this section. You may want to refresh the page or try again later.

TLS850C2TE V33
TLS850C2TE V33
ea.
Data Sheet

Product details

  • Accuracy
    2 %
  • Base Product
    TLS850C2xx
  • Dropout Voltage
    100 mV
  • Early Warning
    no
  • Enable (=Inhibit)
    no
  • Family
    OPTIREG™ linear High Performance
  • Hold
    no
  • Operating Temperature
    -40 °C to 150 °C
  • Operating Voltage
    3 V to 40 V
  • Output Current max
    500 mA
  • Output Voltage Type
    3.3 V
  • Over Voltage Protection
    no
  • Planned to be available until at least
    2038
  • Power Fail
    no
  • Power Good
    no
  • Qualification
    Automotive
  • Quiescent Current
    20 µA
  • Regulator Type
    High Performance
  • Reset
    yes
  • Status Output
    no
  • Watchdog
    no
Recommended
OPN
TLS850C2TEV33ATMA1
Product Status active and preferred
Infineon Package
PG-TO252-5
Package Name N/A
Packing Size 2500
Packing Type TAPE & REEL
Moisture Level 1
Moisture Packing NON DRY
Lead-free No
Halogen Free Yes
RoHS Compliant Yes
Infineon stock last updated:
 ea. in stock

Product Status
Active
Infineon Package
PG-TO252-5
Package Name -
Packing Size 2500
Packing Type TAPE & REEL
Moisture Level 1
Moisture Packing NON DRY
Lead Free
Halogen Free
RoHS Compliant
ea.
in stock
The TLS850C2TE is a regulator suitable for automotive applications with an input range of 3V to 40V. Its low quiescent current of 20µA is ideal for always-on systems. The ultra-low dropout enables operation during cranking. The new loop concept ensures fast regulation and high stability with just a 1µF ceramic capacitor at the output. Internal protection features safeguard against failures. Also available in 5V output version as TLS850C2TE V50.

Features

  • input voltage range from 3.0 V to 40 V
  • temperature range Tj : -40°C to +150°C
  • Fixed output voltage 3.3 V
  • Output current capability up to 500 mA
  • Reset Output
  • Output voltage accuracy ≤ ±2%
  • low dropout voltage, typ. 100 mV@100 mA
  • ceramic output capacitor of 1 µF
  • Over temperature shutdown
  • Output current limitation
  • temperature range from -40°C up to 150°C

Benefits

  • Very wide input voltage range
  • Low passive component BOM cost
  • Supervisory functionality (RESET)
  • Suitable for Cranking condition
  • Low current consumption
  • Best MCU: 3.3V Supply
  • Sensors (on-board)
  • Actuator ICs
  • Driver ICs

Diagrams

TLS850C2_Website_Digram
TLS850C2_Website_Digram
TLS850C2_Website_Digram TLS850C2_Website_Digram TLS850C2_Website_Digram
TLS850C2_Website_Digram TLS850C2_Website_Digram TLS850C2_Website_Digram
×
modalImg

Documents

Documents

Design resources

Partner solutions

Developer community

{ "ctalist":[ { "link" : "https://community.infineon.com/t5/forums/postpage/choose-node/true", "label" : "Ask the community", "labelEn" : "Ask the community" }, { "link" : "https://community.infineon.com/t5/Forums/ct-p/products", "label" : "View all discussions", "labelEn" : "View all discussions" } ] }