PSOC™ Automotive Multitouch Gen8

Experience the future of automotive touchscreens with PSOC™ Automotive Multitouch Gen8

Compare families

About

About Infineon's PSOC™ Automotive Multitouch Gen8 microcontrollers

Elevate your automotive touchscreen experience with Infineon's PSOC™ Automotive Multitouch Gen8, a product born from over 10 years of expertise in touch controller technology. Infineon’s register configurable methodology provides tried and tested algorithms developed over >200 man-years of automotive firmware development. Our Automotive Multitouch solutions undergo rigorous testing, ensuring compliance with EMI/EMC standards, ESD resilience, and adaptability to environmental changes. Validation reports streamline development cycles, accelerating your go-to-market strategy.

A typical touchscreen system consists of a capacitive touchscreen sensor, an FPC bonded to the sensor, and the touchscreen controller mounted on the FPC or PCB. The touchscreen controller then connects to a host processor, where users can interact with the displayed touchscreen interface through finger movements and gestures. Designed for versatility, the PSOC™ Automotive Multitouch Gen8 detects multiple finger positions, enhancing user interaction through precise gestures. Infineon's commitment to innovation guarantees the right solution for your design needs, seamlessly integrating with existing systems and meeting complex requirements with confidence.

System benefits of the PSOC™ Automotive Multitouch Gen8 MCU family

Automotive Electronics Council (AEC) Q100 qualified MISRA-C / IATF 16949 ASIL-B and Auto-SPICE level-3 Touch controller:

  • 32-bit Arm® Cortex® CPU
  • Register-configurable
  • Noise-suppression technologies for display and EMI
  • AutoArmor
  • Spread-spectrum scanning
  • Effective 20-V drive
  • Display synchronization
  • High-noise capable, e.g, OLED
  • Ultra large screen including mul-tichip and split-screen
  • Rotary dial
  • Bulit-in Haptics
  • Non-rectangular touchscreens
  • Runtime diagnotics
  • Field upgrades via bootloader
  • Manufacturing Test Kit (MTK)

Performance (config dependent):

  • Screen sizes up to 24-inch (1 chip)
  • 10 touches at up to 250 Hz
  • Gloves (or overlay) up to 4mm
  • TX frequency up to 350 kHz
  • 30-mW average power
  • 30-µW typical deep-sleep power

Communication:

  • I2C up to 1 Mbps
  • SPI up to 8 Mbps

Packages:

  • 176-pin TQFP 24 × 16 × 1.4 mm
  • 144-pin TQFP 16 × 16 × 1.6 mm

Ambient temperature range:

  • Automotive-A: –40°C to 85°C
  • Automotive-S: –40°C to 105°C
PSOC™ digital and technical documentation

Access to PSOC™ Automotive 4 Digital collaterals

Discover the future of marketing with our cutting-edge digital collaterals, seamlessly integrated into HTML for a streamlined, interactive experience. Our all-in-one solution ensures that all your marketing assets, from datasheets and user manuals to code examples and presentations, are easily accessible and beautifully displayed across any device.

Discover PSOC™ Automotive 4 digital collaterals

Access to additional PSOC™ Automotive 4 technical documentation

Register to the myInfineon Collaboration Platform (myICP) and gain access to additional microcontroller information: Technical add-on documentation, training, tools, and much more. Follow these steps to get started:

  1. Sign up to myInfineon here.
  2. Send your access request to AUTOPSOC@infineon.com (with your company email address).
  3. You will receive a confirmation explaining how to use your new access.
myICP
How to register

Microcontroller Training and Video Hub

Dive into the Microcontroller Training and Video Hub and explore expert tutorials, hands-on guides, and in-depth trainings on ModusToolbox™. Whether you're a beginner or a professional, learn the full potential of PSOC™ 4 Automotive.

Microcontroller Training and Video Hub
PSOC™ Multitouch Touch Tuning Host Emulator

The PSOC™ Touch Tuning Host Emulator is an essential and powerful tool designed to configure, tune, debug, and demonstrate touch screen devices. This official front-end tool provides a user-friendly interface that enables developers to test and evaluate touch screen performance with ease. 

PSOC™ Multitouch Touch Tuning Host Emulator

Drive Core for PSOC™

Infineon’s PSOC™ Drive Core is a scalable software bundle that accelerates development, simplifies migration, and reduces commercial and supplier management complexities.

Drive Core for PSOC™
Automotive PSOC™ preferred design houses

Our Automotive PSOC™ preferred design houses is a trusted partners' ecosystem that extends the support force by tailoring their know-how to meet your specific needs.

By partnering with one of our qualified preferred design houses, you can be assured that you'll receive expert advice and customized support to help you achieve your goals. Our team of professionals brings added value to customer service, working together to optimize your design and help you succeed in your business objectives.

We understand that every customer is unique, which is why we offer tailored solutions to meet your specific needs. From product-specific support to application-specific advice, our preferred design house is fully trained to use Automotive PSOC™ 4, PSOC™ High Voltage and PSOC™ Automotive Multitouch and provides a wealth of knowledge and expertise to help you succeed.

Together with our partners, we offer optimized customer support for systems using our products. Our preferred design houses are committed to delivering exceptional service and support to ensure your success.

Automotive PSOC™ preferred design houses

About Infineon's PSOC™ Automotive Multitouch Gen8 microcontrollers

Elevate your automotive touchscreen experience with Infineon's PSOC™ Automotive Multitouch Gen8, a product born from over 10 years of expertise in touch controller technology. Infineon’s register configurable methodology provides tried and tested algorithms developed over >200 man-years of automotive firmware development. Our Automotive Multitouch solutions undergo rigorous testing, ensuring compliance with EMI/EMC standards, ESD resilience, and adaptability to environmental changes. Validation reports streamline development cycles, accelerating your go-to-market strategy.

A typical touchscreen system consists of a capacitive touchscreen sensor, an FPC bonded to the sensor, and the touchscreen controller mounted on the FPC or PCB. The touchscreen controller then connects to a host processor, where users can interact with the displayed touchscreen interface through finger movements and gestures. Designed for versatility, the PSOC™ Automotive Multitouch Gen8 detects multiple finger positions, enhancing user interaction through precise gestures. Infineon's commitment to innovation guarantees the right solution for your design needs, seamlessly integrating with existing systems and meeting complex requirements with confidence.

System benefits of the PSOC™ Automotive Multitouch Gen8 MCU family

Automotive Electronics Council (AEC) Q100 qualified MISRA-C / IATF 16949 ASIL-B and Auto-SPICE level-3 Touch controller:

  • 32-bit Arm® Cortex® CPU
  • Register-configurable
  • Noise-suppression technologies for display and EMI
  • AutoArmor
  • Spread-spectrum scanning
  • Effective 20-V drive
  • Display synchronization
  • High-noise capable, e.g, OLED
  • Ultra large screen including mul-tichip and split-screen
  • Rotary dial
  • Bulit-in Haptics
  • Non-rectangular touchscreens
  • Runtime diagnotics
  • Field upgrades via bootloader
  • Manufacturing Test Kit (MTK)

Performance (config dependent):

  • Screen sizes up to 24-inch (1 chip)
  • 10 touches at up to 250 Hz
  • Gloves (or overlay) up to 4mm
  • TX frequency up to 350 kHz
  • 30-mW average power
  • 30-µW typical deep-sleep power

Communication:

  • I2C up to 1 Mbps
  • SPI up to 8 Mbps

Packages:

  • 176-pin TQFP 24 × 16 × 1.4 mm
  • 144-pin TQFP 16 × 16 × 1.6 mm

Ambient temperature range:

  • Automotive-A: –40°C to 85°C
  • Automotive-S: –40°C to 105°C

PSOC™ digital and technical documentation

Access to PSOC™ Automotive 4 Digital collaterals

Discover the future of marketing with our cutting-edge digital collaterals, seamlessly integrated into HTML for a streamlined, interactive experience. Our all-in-one solution ensures that all your marketing assets, from datasheets and user manuals to code examples and presentations, are easily accessible and beautifully displayed across any device.

Discover PSOC™ Automotive 4 digital collaterals

Access to additional PSOC™ Automotive 4 technical documentation

Register to the myInfineon Collaboration Platform (myICP) and gain access to additional microcontroller information: Technical add-on documentation, training, tools, and much more. Follow these steps to get started:

  1. Sign up to myInfineon here.
  2. Send your access request to AUTOPSOC@infineon.com (with your company email address).
  3. You will receive a confirmation explaining how to use your new access.
myICP
How to register

Microcontroller Training and Video Hub

Dive into the Microcontroller Training and Video Hub and explore expert tutorials, hands-on guides, and in-depth trainings on ModusToolbox™. Whether you're a beginner or a professional, learn the full potential of PSOC™ 4 Automotive.

Microcontroller Training and Video Hub

PSOC™ Multitouch Touch Tuning Host Emulator

The PSOC™ Touch Tuning Host Emulator is an essential and powerful tool designed to configure, tune, debug, and demonstrate touch screen devices. This official front-end tool provides a user-friendly interface that enables developers to test and evaluate touch screen performance with ease. 

PSOC™ Multitouch Touch Tuning Host Emulator

Drive Core for PSOC™

Infineon’s PSOC™ Drive Core is a scalable software bundle that accelerates development, simplifies migration, and reduces commercial and supplier management complexities.

Drive Core for PSOC™

Automotive PSOC™ preferred design houses

Our Automotive PSOC™ preferred design houses is a trusted partners' ecosystem that extends the support force by tailoring their know-how to meet your specific needs.

By partnering with one of our qualified preferred design houses, you can be assured that you'll receive expert advice and customized support to help you achieve your goals. Our team of professionals brings added value to customer service, working together to optimize your design and help you succeed in your business objectives.

We understand that every customer is unique, which is why we offer tailored solutions to meet your specific needs. From product-specific support to application-specific advice, our preferred design house is fully trained to use Automotive PSOC™ 4, PSOC™ High Voltage and PSOC™ Automotive Multitouch and provides a wealth of knowledge and expertise to help you succeed.

Together with our partners, we offer optimized customer support for systems using our products. Our preferred design houses are committed to delivering exceptional service and support to ensure your success.

Automotive PSOC™ preferred design houses

Documents

Documents