Active and preferred
RoHS Compliant

TLS850A4TEV50

The TLS850A4TEV50 is a high performance, low dropout linear voltage regulator and ultra-low quiescent current for 5.0 V supply in a PG-TO252-3 package
Data Sheet
package
board

Content could not be loaded

Unfortunately, we were unable to load the content for this section. You may want to refresh the page or try again later.

TLS850A4TEV50
TLS850A4TEV50
Data Sheet

Product details

  • Accuracy
    2 %
  • Base Product
    TLS8xA4
  • Dropout Voltage
    190 mV
  • Early Warning
    no
  • Enable (=Inhibit)
    no
  • Family
    EiceDRIVER™ isolated gate driver ICs for EV
  • Hold
    no
  • Operating Temperature
    -40 °C to 150 °C
  • Operating Voltage
    3.7 V to 40 V
  • Output Current max
    500 mA
  • Output Voltage Type
    5.0 V
  • Over Voltage Protection
    no
  • Planned to be available until at least
    2038
  • Power Fail
    no
  • Power Good
    no
  • Qualification
    Automotive
  • Quiescent Current
    4.3 µA
  • Regulator Type
    High Performance
  • Reset
    no
  • Status Output
    no
  • Watchdog
    no
Recommended
OPN
TLS850A4TEV50ATMA1
Product Status active and preferred
Infineon Package
PG-TO252-3
Package Name DPAK
Packing Size 2500
Packing Type TAPE & REEL
Moisture Level 1
Moisture Packing NON DRY
Lead-free No
Halogen Free Yes
RoHS Compliant Yes
Infineon stock last updated:

Product Status
Active
Infineon Package
PG-TO252-3
Package Name DPAK
Packing Size 2500
Packing Type TAPE & REEL
Moisture Level 1
Moisture Packing NON DRY
Lead Free
Halogen Free
RoHS Compliant
The input voltage range of 3.7 V to 40 V and ultra-low quiescent current of 4.3 μA at light load make the device perfectly suitable for automotive supply systems or other supply systems that are permanently connected to the battery. The loop concept combines fast regulation and very high stability while requiring only one small ceramic capacitor of 4.7 μF at the output. Below an output current of 100 mA the typical dropout voltage is below 190mV. The operating range starts at an input voltage of only 3.7 V (extended operating range). This makes the TLS850A4TEV50 suitable for automotive systems that need to operate during cranking condition.
Internal protection features, such as output current limitation and overtemperature shutdown, are designed to protect the device from immediate damage caused by failures such as output shorted to GND, overcurrent condition and overtemperature condition. This product is also available in 300mA: TLS830A4EPV50

Features

  • Low quiescent current, typically 4.3 Μa
  • Low quiescent current,typically 4.3μA
  • Wide input voltage range from 3.7V to40V
  • Output voltage 5 V
  • Output voltage accuracy ±2%
  • Output current capability up to 500 mA
  • Overtemperature shutdown
  • Output current limitation
  • Wide temperature range
  • Green Product (RoHS compliant)

Benefits

  • Supports cranking at 3.7V and below
  • Energy efficiency: Longer Battery life
  • Fewer components:Smaller PCB,lower cost

Applications

Documents

Documents

Design resources

Partner solutions

Developer community

{ "ctalist":[ { "link" : "https://community.infineon.com/t5/forums/postpage/choose-node/true", "label" : "Ask the community", "labelEn" : "Ask the community" }, { "link" : "https://community.infineon.com/t5/Forums/ct-p/products", "label" : "View all discussions", "labelEn" : "View all discussions" } ] }