Active and preferred
RoHS Compliant
Lead-free

BGSA400ML10

Ultra high RF voltage antenna tuning switch
Data Sheet
package
ea.
in stock

Content could not be loaded

Unfortunately, we were unable to load the content for this section. You may want to refresh the page or try again later.

BGSA400ML10
BGSA400ML10
ea.
Data Sheet

Product details

  • COFF
    165 fF
  • Control Interface
    MIPI 2.1
  • Frequency Range
    0.4 - 7.125 GHz
  • Halogen-free
    yes
  • RON
    2 Ω
  • Size
    1.1 x 1.5 mm²
  • Switch Type
    4xSPST
  • VRFmax
    85 V
Recommended
OPN
BGSA400ML10E6327XTSA1
Product Status active and preferred
Infineon Package
PG-TSLP-10
Package Name N/A
Packing Size 7500
Packing Type TAPE & REEL
Moisture Level 1
Moisture Packing NON DRY
Lead-free Yes
Halogen Free Yes
RoHS Compliant Yes
Infineon stock last updated:
 ea. in stock

Product Status
Active
Infineon Package
PG-TSLP-10
Package Name -
Packing Size 7500
Packing Type TAPE & REEL
Moisture Level 1
Moisture Packing NON DRY
Lead Free
Halogen Free
RoHS Compliant
ea.
in stock
The BGSA400ML10 is a versatile shunt to ground 4 x single-pole single-throw (4xSPST) RF antenna tuning switch. It is optimized for low COFF as well as low RON enabling applications up to 7.125GHz. The BGSA400ML10 is ideal for antenna tuning application. This chip integrates on-chip CMOS logic and power supply regulation. Its digital control interface is compliant with MIPI2.1 RFFE specification and each switch throw can be programmed individually or all together in the same RFFE command frame. Up to 4 instantiations of the same device can be controlled using the same RFFE bus thanks to its 4 states USID_SEL pin unique feature.

Features

  • Low RON resistance of 2.0 Ω at each port in ON state
  • Low COFF capacitance of 165 fF at each port in OFF state
  • High RF operating peak voltage handling of typical 90 V in OFF state
  • Low harmonic generation
  • MIPI RFFE 2.1 control interface
  • Extremely low current consumption of 22 µA
  • 4 default USID addresses via external USID_SEL pin
  • Small form factor 1.1 mm x 1.5 mm (MSL1, 260 °C per JEDEC J-STD-020)

Documents

Documents

Design resources

Partner solutions

Developer community

{ "ctalist":[ { "link" : "https://community.infineon.com/t5/forums/postpage/choose-node/true", "label" : "Ask the community", "labelEn" : "Ask the community" }, { "link" : "https://community.infineon.com/t5/Forums/ct-p/products", "label" : "View all discussions", "labelEn" : "View all discussions" } ] }