Active and preferred
RoHS Compliant

KIT_XMC71_EVK_LITE_V1

User Manual
ea.
in stock

Content could not be loaded

Unfortunately, we were unable to load the content for this section. You may want to refresh the page or try again later.

KIT_XMC71_EVK_LITE_V1
KIT_XMC71_EVK_LITE_V1
ea.
User Manual

Product details

  • Bluetooth Standard
    N/A
  • Board Type
    Evaluation Kit
  • CapSense
    No
  • Core
    ARM Cortex-M7,ARM Cortex-M0+
  • External memory
    512-Mbit Quad SPI NOR Flash
  • Family
    XMC7100 Industrial Microcontroller
  • Features
    Ethernet PHY, RJ45 jack
  • GPIOs/Shield Compatibility
    Arduino Uno, mikroBUS, Shield2Go
  • Input Type
    DC
  • Programmer/Debugger
    Onboard KitProg
  • Qualification
    Industrial
  • Sensors
    None
  • Software Support
    ModusToolbox
  • Supply Voltage
    3.3 V to 5 V
  • Target Application
    Industrial
  • WiFi Standard
    N/A
Recommended
OPN
KITXMC71EVKLITEV1TOBO1
Product Status active and preferred
Infineon Package N/A
Package Name N/A
Packing Size 1
Packing Type CONTAINER
Moisture Level NA
Moisture Packing NON DRY
Lead-free No
Halogen Free No
RoHS Compliant Yes
Infineon stock last updated:
 ea. in stock

Product Status
Active
Infineon Package N/A
Package Name -
Packing Size 1
Packing Type CONTAINER
Moisture Level NA
Moisture Packing NON DRY
Lead Free
Halogen Free
RoHS Compliant
ea.
in stock
The XMC7100 Evaluation Board (KIT_XMC71_EVK_LITE_V1) enables you to evaluate and develop your applications using the XMC7100D microcontroller. The XMC7100D is designed for industrial applications and is a true programmable embedded system-on-chip, integrating up to two 250-MHz Arm® Cortex®-M7 as the primary application processors, 100-MHz Arm® Cortex®-M0+ that supports the following:
  • Low-power operations
  • Programmable analog and digital peripherals that allow faster time-to-market
ModusToolbox™ software supports application development using the XMC7100 evaluation kit by providing board support package (BSP) and validated code examples to help you get started. To download the latest version of the software, please visit the ModusToolbox™ webpage. Kit contents
  • XMC7100 Evaluation Board
  • USB Type-A to Micro-B cable
  • Quick start guide (printed on kit package)

Features

  • Evaluation board for XMC7100D-F176K4160AA in TEQFP package with 176 pins dual 250-MHz Arm® Cortex®-M7 and 100MHz Cortex®-M0+ CPUs
  • CAN FD transceiver, a micro-B connector for USB device interface, provision for Gb Ethernet PHY transceiver with RJ45 connector interface
  • A potentiometer that can be used to simulate analog sensor output
  • A mode button and a mode LED for KitProg3
  • Two user LEDs, two user buttons, and a reset button for the XMC7100D
  • KitProg3 on-board programmer/debugger, USB-UART and USB-I2C bridge functionality through USB connector.
  • Headers compatible with Arduino for interfacing Arduino shields
  • Two S2GO headers and a mikroBus header for interfacing sensors
  • Fully compatible with the latest version of ModusToolboxTM
  • A 512-Mbit QSPI NOR flash
  • The board supports operating voltages from 3.3 V to 5.0 V for XMC7100D

Benefits

  • Out-of-the-box experience with on-board-programmer/debugger and the provided USB Type-A to Micro-B cable
  • Full integration with ModusToolbox™ IDE through Board Support Package (BSP), supporting an extensive list of code examples
  • Easy access and evaluation of all peripherals using code examples available in GitHub
  • Arduino ecosystem access

Applications

Bill of Material

Documents

Documents

Design resources

Partner solutions