S70KL1281DABHI023

High-Performance 128 MBit HYPERRAM with 40ns Initial Access Time and 200 MByte/s Interface Bandwidth
Data Sheet

Content could not be loaded

Unfortunately, we were unable to load the content for this section. You may want to refresh the page or try again later.

S70KL1281DABHI023
S70KL1281DABHI023
Data Sheet

Product details

  • Density
    128 MBit
  • Family
    KL-1
  • Initial Access Time
    40 ns
  • Interface Bandwidth
    200 MByte/s
  • Interface Frequency (SDR/DDR) (MHz)
    - / 100
  • Interfaces
    HYPERBUS
  • Lead Ball Finish
    N/A
  • Operating Temperature range
    -40 °C to 85 °C
  • Operating Voltage range
    2.7 V to 3.3 V
  • Operating Voltage
    3 V
  • Peak Reflow Temp
    260 °C
  • Technology
    HYPERRAM
OPN
Product Status
Infineon Package
Package Name
Packing Size
Packing Type
Moisture Level
Moisture Packing
Lead-free
Halogen Free
RoHS Compliant
Infineon stock last updated:
The S70KL1281DABHI023 is a 128 Mb (16 MB) HyperRAM self-refresh DRAM for buffer memory in MCUs/SoCs, using a low-signal-count DDR interface with 8-bit DQ, CS#, CK (single-ended or differential), and RWDS. It supports up to 100 MHz clock (200 MBps) and tACC up to 36 ns. Operates from 2.7 V to 3.6 V supply at -40 to 8560C (industrial), in a 24-ball 5 5 FBGA, model 02, tape-and-reel packing.

Features

  • HyperRAM low-signal-count interface
  • 8-bit DDR data bus (DQ[7:0])
  • 11/12 interface signals (VIO)
  • Up to 166 MHz clock at 1.8 V
  • Up to 100 MHz clock at 3.0 V
  • Up to 333 MBps peak bandwidth
  • RWDS strobe with mask function
  • Wrapped burst 16/32/64/128 bytes
  • Linear and hybrid burst options
  • Deep Power Down mode (DPD)
  • 1.7 V to 1.95 V supply range
  • 2.7 V to 3.6 V supply range

Benefits

  • Cuts MCU pin count vs parallel DRAM
  • DDR boosts throughput per clock
  • Simplifies routing with fewer traces
  • 166 MHz supports fast memory reads
  • 100 MHz fits 3.0 V host designs
  • 333 MBps supports rich HMI assets
  • RWDS eases timing, masks writes
  • Burst options optimize bus efficiency
  • Linear bursts fit streaming access
  • DPD reduces standby power drain
  • Wide 1.8 V supply eases power tree
  • Wide 3.0 V supply fits legacy rails

Applications

Documents

Documents

Design resources

Partner solutions

Developer community

{ "ctalist":[ { "link" : "https://community.infineon.com/t5/forums/postpage/choose-node/true", "label" : "Ask the community", "labelEn" : "Ask the community" }, { "link" : "https://community.infineon.com/t5/Forums/ct-p/products", "label" : "View all discussions", "labelEn" : "View all discussions" } ] }