Active and preferred
RoHS Compliant
Lead-free

BGSA20UGL8

High RF voltage dual SPST antenna aperture shunt switch
Data Sheet
package

Content could not be loaded

Unfortunately, we were unable to load the content for this section. You may want to refresh the page or try again later.

BGSA20UGL8
BGSA20UGL8
Data Sheet

Product details

  • COFF
    157 fF
  • Control Interface
    GPIO
  • Frequency Range
    0.4 - 6.0 GHz
  • Halogen-free
    yes
  • RON
    1.4 Ω
  • Size
    1.1 x 1.1 mm²
  • Switch Type
    2xSPST
  • VRFmax
    80 V
Recommended
OPN
BGSA20UGL8E6327XTSA1
Product Status active and preferred
Infineon Package
TSLP-8-1
Package Name N/A
Packing Size 15000
Packing Type TAPE & REEL
Moisture Level 1
Moisture Packing NON DRY
Lead-free Yes
Halogen Free Yes
RoHS Compliant Yes
Infineon stock last updated:

Product Status
Active
Infineon Package
TSLP-8-1
Package Name -
Packing Size 15000
Packing Type TAPE & REEL
Moisture Level 1
Moisture Packing NON DRY
Lead Free
Halogen Free
RoHS Compliant
The BGSA20UGL8 is a versatile Dual Single-Pole Single-Throw (SPST) RF antenna shunt aperture switch optimized for low COFF as well as low RON enabling applications up to 6.0 GHz. This single supply chip integrates 2 digital control pins. Unlike GaAs technology, the 0.1 dB compression point exceeds the switch maximum input power level, resulting in linear performance at all signal levels and external DC blocking capacitors at the RF ports are only required if DC voltage is applied externally. Due to its very high RF voltage ruggedness, it is suited for switching any reactive devices such as inductors and capacitors in RF matching circuits without significant losses in quality factors.

Features

  • Dual SPST designed for high-linearity antenna aperture switching and RF tuning applications
  • Low RON resistance of 2.3 Ω at each port in ON state
  • Low COFF capacitance of 200 fF at each port in OFF state
  • > 80 V RF voltage OFF state handling
  • Low harmonic generation
  • GPIO control interface - including 4 control states
  • Supply voltage range: 1.65 to 3.6 V
  • No RF parameter change within supply voltage range
  • Small form factor 1.1 mm x 1.1 mm (MSL1, 260° C per JEDEC J-STD-020)
  • Suitable for EDGE/CDMA/WCDMA/C2K/LTE/5G Applications
  • RoHS and WEEE compliant package

Documents

Documents

Design resources

Partner solutions

Developer community

{ "ctalist":[ { "link" : "https://community.infineon.com/t5/forums/postpage/choose-node/true", "label" : "Ask the community", "labelEn" : "Ask the community" }, { "link" : "https://community.infineon.com/t5/Forums/ct-p/products", "label" : "View all discussions", "labelEn" : "View all discussions" } ] }