Active and preferred
RoHS Compliant
Lead-free

BGA525N6

Data Sheet
package
ea.
in stock

Content could not be loaded

Unfortunately, we were unable to load the content for this section. You may want to refresh the page or try again later.

BGA525N6
BGA525N6
ea.
Data Sheet

Product details

  • Frequency
    1164 – 1615 MHz (L1/L2/L5)
  • Gain
    19 dB, 17.9 dB, 15.5 dB
  • ICC
    3.4 mA, 1.5 mA, 2.3 mA
  • IIP3
    1 dBm, -2.5 dBm, -5 dBm
  • NF
    0.7 dB, 0.8 dB, 0.9 dB
  • P-1dB (in)
    -5, -2.5, -14
  • VCC operating
    1.1 V to 3.3 V
Recommended
OPN
BGA525N6E6327XTSA1
Product Status active and preferred
Infineon Package
PG-TSNP-6
Package Name N/A
Packing Size 12000
Packing Type TAPE & REEL
Moisture Level 1
Moisture Packing NON DRY
Lead-free Yes
Halogen Free Yes
RoHS Compliant Yes
Infineon stock last updated:
 ea. in stock

Product Status
Active
Infineon Package
PG-TSNP-6
Package Name -
Packing Size 12000
Packing Type TAPE & REEL
Moisture Level 1
Moisture Packing NON DRY
Lead Free
Halogen Free
RoHS Compliant
ea.
in stock
The BGA525N6 is designed to enhance GNSS signal sensitivity for band L1/L2/L5 especially in wearables and mobile cellular IoT applications. With a high gain and ultra-low noise figure of the LNA, system sensitivity is significantly improved compared to conventional LNAs. Next to the Standard Mode, BGA525N6 offers a Low-power Mode and High-gain Mode. Operating in Low-power Mode, the LNA consumes less than 2 mW preserving valuable battery power, which is ideal for small battery powered GNSS devices. Operating in High-gain Mode, the LNA provides up to 21 dB Gain and ensures best performance and fastest Time-To-First-Fix. The GPIO control interface provides a straightforward control over 4 different operating modes. The broadband design ensures the functionality of all GNSS signals within 1164 to 1615 MHz with the same matching. Simplified dual-band GNSS system designs with one RF-Path are enabled by BGA525N6.

Features

  • Operation frequencies 1164 to 1615 MHz
  • Multiple-Operating Modes for different applications
  • Current consumption down to 1.5 mA
  • Wide supply voltage range 1.1 V to 3.3 V
  • High insertion power gain up to 21 dB
  • Low noise figure down to 0.7 dB
  • 2 kV HBM ESD protection (inluding AI pin)
  • Broadband design allows simultaneous operation of L1,L2,L5

Applications

Documents

Documents

Design resources

Partner solutions

Developer community

{ "ctalist":[ { "link" : "https://community.infineon.com/t5/forums/postpage/choose-node/true", "label" : "Ask the community", "labelEn" : "Ask the community" }, { "link" : "https://community.infineon.com/t5/Forums/ct-p/products", "label" : "View all discussions", "labelEn" : "View all discussions" } ] }