- ASIC
- Battery management ICs
- Clocks and timing solutions
- ESD and surge protection devices
- Automotive Ethernet
- Evaluation Boards
- High reliability
- Isolation
- Memories
- Microcontroller
- Power
- RF
- Security and smart card solutions
- Sensor technology
- Small signal transistors and diodes
- Transceivers
- Universal Serial Bus (USB)
- Wireless connectivity
- Suchwerkzeuge
- Packages
- Bezugsquellen
- Überblick
- Automotive Ethernet Bridges
- Automotive Ethernet PHY for in-vehicle networking
- Automotive Ethernet Switches for in-vehicle networking
- Überblick
- Defense
- High-reliability custom services
- New space
- Space
- Überblick
- Embedded flash IP solutions
- Flash+RAM MCP solutions
- F-RAM (Ferroelectric RAM)
- NOR flash
- nvSRAM (non-volatile SRAM)
- PSRAM (Pseudostatic RAM)
- Radiation hardened and high-reliability memories
- RRAM Resistive Ram
- SRAM (static RAM)
- Wafer and die memory solutions
- Überblick
- 32-bit FM Arm® Cortex® Microcontroller
- 32-bit AURIX™ TriCore™ microcontroller
- 32-bit PSOC™ Arm® Cortex® microcontroller
- 32-bit TRAVEO™ T2G Arm® Cortex® microcontroller
- 32-bit XMC™ industrial microcontroller Arm® Cortex®-M
- Legacy microcontroller
- MOTIX™ MCU | 32-bit motor control SoC based on Arm® Cortex®-M
- Sensing controllers
- Überblick
- AC-DC power conversion
- Automotive conventional powertrain ICs
- Class D audio amplifier ICs
- Contactless power and sensing ICs
- DC-DC converters
- Diodes and thyristors (Si/SiC)
- Gallium nitride (GaN)
- Gate driver ICs
- IGBTs – Insulated gate bipolar transistors
- Intelligent power modules (IPM)
- LED driver ICs
- Motor control ICs
- Power MOSFETs
- Power modules
- Power supply ICs
- Protection and monitoring ICs
- Silicon carbide (SiC)
- Smart power switches
- Solid state relays
- Wireless charging ICs
- Überblick
- Antenna cross switches
- Antenna tuners
- Bias and control
- Coupler
- Driver amplifiers
- High Reliability Discrete
- Low noise amplifiers (LNAs)
- RF diode
- RF switches
- RF transistors
- Wireless control receiver
- Überblick
- Calypso® products
- CIPURSE™ products
- Contactless memories
- OPTIGA™ embedded security solutions
- SECORA™ security solutions
- Security controllers
- Smart card modules
- Smart solutions for government ID
- Überblick
- ToF 3D image sensors
- Current sensors
- Gas sensors
- Inductive position sensors
- MEMS microphones
- Pressure sensors
- Radar sensors
- Magnetic position sensors
- Magnetic speed sensors
- Überblick
- Bipolar transistors
- Diodes
- Small signal/small power MOSFET
- Überblick
- Automotive transceivers
- Control communication
- Powerline communications
- Überblick
- USB 2.0 peripheral controllers
- USB 3.2 peripheral controllers
- USB hub controllers
- USB PD high-voltage microcontrollers
- USB-C AC-DC and DC-DC charging solutions
- USB-C charging port controllers
- USB-C Power Delivery controllers
- Überblick
- AIROC™ Automotive wireless
- AIROC™ Bluetooth® and multiprotocol
- AIROC™ connected MCU
- AIROC™ Wi-Fi + Bluetooth® combos
- Überblick
- Commercial off-the-shelf (COTs) memory portfolio
- Defense memory portfolio
- High-reliability power conversion and management
- Überblick
- NewSpace memory portfolio
- Radiation tolerant power
- Überblick
- Rad hard microwave and RF
- Radiation hardened power
- Space memory portfolio
- Überblick
- Parallel NOR flash
- SEMPER™ NOR flash family
- SEMPER™ X1 LPDDR flash
- Serial NOR flash
- Überblick
- FM0+ 32-bit Arm® Cortex®-M0+ microcontroller (MCU) families
-
FM3 32-bit Arm® Cortex®-M3 microcontroller (MCU) families
- Überblick
- FM3 CY9AFx1xK series Arm® Cortex®-M3 microcontroller (MCU)
- FM3 CY9AFx1xL/M/N series Arm® Cortex®-M3 microcontroller (MCU)
- FM3 CY9AFx2xK/L series Arm® Cortex®-M3 microcontroller (MCU)
- FM3 CY9AFx3xK/L series ultra-low leak Arm® Cortex®-M3 microcontroller (MCU)
- FM3 CY9AFx4xL/M/N series low power Arm® Cortex®-M3 microcontroller (MCU)
- FM3 CY9AFx5xM/N/R series low power Arm® Cortex®-M3 microcontroller (MCU)
- FM3 CY9AFxAxL/M/N series ultra-low leak Arm® Cortex®-M3 microcontroller (MCU)
- FM3 CY9BFx1xN/R high-performance series Arm® Cortex®-M3 microcontroller (MCU)
- FM3 CY9BFx1xS/T high-performance series Arm® Cortex®-M3 microcontroller (MCU)
- FM3 CY9BFx2xJ series Arm® Cortex®-M3 microcontroller (MCU)
- FM3 CY9BFx2xK/L/M series Arm® Cortex®-M3 microcontroller (MCU)
- FM3 CY9BFx2xS/T series Arm® Cortex®-M3 microcontroller (MCU)
-
FM4 32-bit Arm® Cortex®-M4 microcontroller (MCU) families
- Überblick
- FM4 CY9BFx6xK/L high-performance series Arm® Cortex®-M4F microcontroller (MCU)
- FM4 CY9BFx6xM/N/R high-performance series Arm® Cortex®-M4F microcontroller (MCU)
- FM4 S6E2C high-performance series Arm® Cortex®-M4F microcontroller (MCU)
- FM4 S6E2G series connectivity Arm® Cortex®-M4F microcontroller (MCU)
- FM4 S6E2H high-performance series Arm® Cortex®-M4F microcontroller (MCU)
- Überblick
-
32-bit TriCore™ AURIX™ – TC2x
- Überblick
- AURIX™ family – TC21xL
- AURIX™ family – TC21xSC (wireless charging)
- AURIX™ family – TC22xL
- AURIX™ family – TC23xL
- AURIX™ family – TC23xLA (ADAS)
- AURIX™ family – TC23xLX
- AURIX™ family – TC264DA (ADAS)
- AURIX™ family – TC26xD
- AURIX™ family – TC27xT
- AURIX™ family – TC297TA (ADAS)
- AURIX™ family – TC29xT
- AURIX™ family – TC29xTT (ADAS)
- AURIX™ family – TC29xTX
- AURIX™ TC2x emulation devices
-
32-bit TriCore™ AURIX™ – TC3x
- Überblick
- AURIX™ family - TC32xLP
- AURIX™ family – TC33xDA
- AURIX™ family - TC33xLP
- AURIX™ family – TC35xTA (ADAS)
- AURIX™ family – TC36xDP
- AURIX™ family – TC37xTP
- AURIX™ family – TC37xTX
- AURIX™ family – TC38xQP
- AURIX™ family – TC39xXA (ADAS)
- AURIX™ family – TC39xXX
- AURIX™ family – TC3Ex
- AURIX™ TC37xTE (emulation devices)
- AURIX™ TC39xXE (emulation devices)
- 32-bit TriCore™ AURIX™ – TC4x
- Überblick
- PSOC™ 4 Arm® Cortex®-M0/M0+
- PSOC™ 4 HV Arm® Cortex®-M0+
- PSOC™ 5 LP Arm® Cortex®-M3
- PSOC™ 6 Arm® Cortex®-M4/M0+
- PSOC™ Multitouch Arm® Cortex®-M0
- PSOC™ Control Arm® Cortex®-M33
- PSOC™ Fingerprint Arm® Cortex®-M0+
- PSOC™ Automotive 4: Arm® Cortex®-M0/M0+
- PSOC™ Edge Arm® Cortex® M55/M33
- Überblick
- 32-bit TRAVEO™ T2G Arm® Cortex® for body
- 32-bit TRAVEO™ T2G Arm® Cortex® for cluster
- Überblick
- 32-bit XMC1000 industrial microcontroller Arm® Cortex®-M0
- 32-bit XMC4000 industrial microcontroller Arm® Cortex®-M4
- XMC5000 Industrial Microcontroller Arm® Cortex®-M4F
- 32-bit XMC7000 Industrial Microcontroller Arm® Cortex®-M7
- Überblick
- Legacy 32-bit MCU
- Legacy 8-bit/16-bit microcontroller
- Other legacy MCUs
- Überblick
- AC-DC integrated power stage - CoolSET™
- AC-DC PWM-PFC controller
- Überblick
- Bridge rectifiers & AC switches
- CoolSiC™ Schottky diodes
- Diode bare dies
- Silicon diodes
- Thyristor / Diode Power Modules
- Thyristor soft starter modules
- Thyristor/diode discs
- Überblick
- Automotive gate driver ICs
- Isolated Gate Driver ICs
- Level-Shift Gate Driver ICs
- Low-Side Drivers
- Transformer Driver ICs
- Überblick
- AC-DC LED driver ICs
- Ballast IC
- DC-DC LED driver IC
- LED dimming interface IC
- Linear LED driver IC
- LITIX™ - Automotive LED Driver IC
- NFC wireless configuration IC with PWM output
- VCSEL driver
- Überblick
- 32-bit PSOC™ Control Arm® Cortex®-M33 MCU
- iMOTION™ Integrated motor control solutions
- MOTIX™ MCU | 32-bit motor control SoC based on Arm® Cortex®-M
- MOTIX™ motor control ICs for BLDC motors
- MOTIX™ motor control ICs for brushed DC motors
- MOTIX™ multi half-bridge ICs for servo and stepper motors
- Überblick
- Automotive MOSFET
- Dual MOSFETs
- MOSFET (Si & SiC) Modules
- N-channel depletion mode MOSFET
- N-channel power MOSFETs
- P-channel power MOSFETs
- Silicon carbide CoolSiC™ MOSFETs
- Small signal/small power MOSFET
- Überblick
- Automotive transceivers
- OPTIREG™ linear voltage regulators (LDO)
- OPTIREG™ PMIC
- OPTIREG™ switcher
- OPTIREG™ System Basis Chips (SBC)
- Überblick
- eFuse
-
High-side switches
- Überblick
- Classic PROFET™ 12V | Automotive smart high-side switch
- Classic PROFET™ 24V | Automotive smart high-side switch
- Power PROFET™ + 12/24/48V | Automotive smart high-side switch
- PROFET™ + 12V | Automotive smart high-side switch
- PROFET™ + 24V | Automotive smart high-side switch
- PROFET™ +2 12V | Automotive smart high-side switch
- PROFET™ Industrial | Smart high-side switch
- PROFET™ Load Guard 12V | Automotive smart high-side switch
- PROFET™ Wire Guard 12V | Automotive eFuse
- Low-side switches
- Multichannel SPI Switches & Controller
- Überblick
- Radar sensors for automotive
- Radar sensors for IoT
- Überblick
- EZ-USB™ CX3 MIPI CSI2 to USB 3.0 camera controller
- EZ-USB™ FX10 & FX5N USB 10Gbps peripheral controller
- EZ-USB™ FX20 USB 20 Gbps peripheral controller
- EZ-USB™ FX3 USB 5 Gbps peripheral controller
- EZ-USB™ FX3S USB 5 Gbps peripheral controller with storage interface
- EZ-USB™ FX5 USB 5 Gbps peripheral controller
- EZ-USB™ SD3 USB 5 Gbps storage controller
- EZ-USB™ SX3 FIFO to USB 5 Gbps peripheral controller
- Überblick
- EZ-PD™ CCG3 USB type-C port controller PD
- EZ-PD™ CCG3PA USB-C and PD
- EZ-PD™ CCG3PA-NFET USB-C PD controller
- EZ-PD™ CCG7x consumer USB-C Power Delivery & DC-DC controller
- EZ-PD™ PAG1: power adapter generation 1
- EZ-PD™ PAG2: Power Adapter Generation 2
- EZ-PD™ PAG2-PD USB-C PD Controller
- Überblick
- EZ-PD™ ACG1F one-port USB-C controller
- EZ-PD™ CCG2 USB Type-C port controller
- EZ-PD™ CCG3PA Automotive USB-C and Power Delivery controller
- EZ-PD™ CCG4 two-port USB-C and PD
- EZ-PD™ CCG5 dual-port and CCG5C single-port USB-C PD controllers
- EZ-PD™ CCG6 one-port USB-C & PD controller
- EZ-PD™ CCG6_CFP and EZ-PD™ CCG8_CFP Dual-Single-Port USB-C PD
- EZ-PD™ CCG6DF dual-port and CCG6SF single-port USB-C PD controllers
- EZ-PD™ CCG7D Automotive dual-port USB-C PD + DC-DC controller
- EZ-PD™ CCG7S Automotive single-port USB-C PD solution with a DC-DC controller
- EZ-PD™ CCG7SAF Automotive Single-port USB-C PD + DC-DC Controller + FETs
- EZ-PD™ CCG8 dual-single-port USB-C PD
- EZ-PD™ CMG1 USB-C EMCA controller
- EZ-PD™ CMG2 USB-C EMCA controller with EPR
- AKTUELLES IN
- Aerospace and defense
- Automotive
- Consumer electronics
- Health and lifestyle
- Home appliances
- Industrial
- Information and Communication Technology
- Renewables
- Robotics
- Security solutions
- Smart home and building
- Solutions
- Überblick
- Defense applications
- Space applications
- Überblick
- 48 V systems for EVs & mild hybrids
- ADAS & autonomous driving
- Automotive body electronics & power distribution
- Automotive LED lighting systems
- Chassis control & safety
- Electric vehicle drivetrain system
- EV thermal management system
- Internal combustion drivetrain systems
- In-vehicle infotainment & HMI
- Light electric vehicle solutions
- Überblick
- Adapters and chargers
- Complete system solutions for smart TVs
- Mobile device and smartphone solutions
- Multicopters and drones
- Power tools
- Semiconductor solutions for home entertainment applications
- Smart conference systems
- Überblick
- Adapters and chargers
- Asset Tracking
- Battery formation and testing
- Electric forklifts
- Battery energy storage (BESS)
- EV charging
- High-voltage solid-state power distribution
- Industrial automation
- Industrial motor drives and controls
- Industrial robots system solutions for Industry 4.0
- LED lighting system design
- Light electric vehicle solutions
- Power tools
- Power transmission and distribution
- Traction
- Uninterruptible power supplies (UPS)
- Überblick
- Data center and AI data center solutions
- Edge computing
- Telecommunications infrastructure
- Machine Learning Edge AI
- Überblick
- Battery formation and testing
- EV charging
- Hydrogen
- Photovoltaic
- Wind power
- Solid-state circuit breaker
- Überblick
- Device authentication and brand protection
- Embedded security for the Internet of Things (IoT)
- eSIM applications
- Government identification
- Mobile security
- Payment solutions
- Access control and ticketing
- Überblick
- Domestic robots
- Heating ventilation and air conditioning (HVAC)
- Home and building automation
- PC accessories
- Semiconductor solutions for home entertainment applications
- Überblick
- Battery management systems (BMS)
- Connectivity
- Human Machine Interface
- Machine Learning Edge AI
- Motor control
- Power conversion
- Security
- Sensor solutions
- System diagnostics and analytics
- Überblick
- Automotive auxiliary systems
- Automotive gateway
- Automotive power distribution
- Body control modules (BCM)
- Comfort & convenience electronics
- Zonal DC-DC converter 48 V-12 V
- Zone control unit
- Überblick
- Automotive animated LED lighting system
- Automotive LED front single light functions
- Automotive LED rear single light functions
- Full LED headlight system - multi-channel LED driver
- LED drivers (electric two- & three-wheelers)
- LED pixel light controller - supply & communication
- Static interior ambient LED light
- Überblick
- Active suspension control
- Airbag system
- Automotive braking solutions
- Automotive steering solutions
- Chassis domain control
- Reversible seatbelt pretensioner
- Überblick
-
Automotive BMS
- Überblick
- Automotive battery cell monitoring & balancing
- Automotive battery control unit (BCU)
- Automotive battery isolated communication
- Automotive battery management system (BMS) - 12 V to 24 V
- Automotive battery management system (BMS) - 48 V
- Automotive battery management system (BMS) - high-voltage
- Automotive battery pack monitoring
- Automotive battery passport & event logging
- Automotive battery protection & disconnection
- Automotive current sensing & coulomb counting
- BMS (electric two- & three-wheelers)
- EV charging
- EV inverters
- EV power conversion & OBC
- FCEV powertrain system
- Überblick
- Automatic transmission hydraulic system
- Belt starter generator 48 V – inverter ISG
- Diesel direct injection
- Double-clutch transmission electrical control
- Double-clutch transmission hydraulic control
- Gasoline direct injection
- Multi-port fuel injection
- Small 1-cylinder combustion engine solution
- Small engine starter kit
- Transfer case brushed DC
- Transfer case brushless DC (BLDC)
- Überblick
- Automotive head unit
- Automotive USB-C power & data solution
- Automotive instrument cluster
- Automotive telematics control unit (TCU)
- Center information display (CID)
- High-performance cockpit controller
- In-cabin wireless charging
- Smart instrument cluster (electric two- & three-wheelers)
- Überblick
- E-bike solutions
- Two- & three-wheeler solutions
- Überblick
- Audio amplifier solutions
- Complete system solutions for smart TVs
- Distribution audio amplifier unit solutions
- Home theater installation speaker system solutions
- Party speaker solutions
- PoE audio amplifier unit solutions
- Portable speaker solutions
- Powered active speaker systems
- Remote control
- Smart speaker designs
- Soundbar solutions
- Überblick
- Data center and AI data center solutions
- Digital input/output (I/O) modules
- DIN rail power supply solutions
- Home and building automation
- Industrial HMI Monitors and Panels
- Industrial motor drives and controls
- Industrial PC
- Industrial robots system solutions for Industry 4.0
- Industrial sensors
- Machine vision
- Mobile robots (AGV, AMR)
- Programmable logic controller (PLC)
- Solid-state circuit breaker
- Uninterruptible power supplies (UPS)
- Überblick
- 48 V intermediate bus converter (IBC)
- AI accelerator cards
- AMD server CPUs
- Ampere CPUs
- FPGAs in datacenter applications
- Intel server CPUs
- Networking and switch platforms
- Power path protection
- Power system reliability modeling
- RAID storage
- Server battery backup units (BBU)
- Server power supply
- SmartNIC cards
- Überblick
- AC-DC power conversion for telecommunications infrastructure
- DC-DC power conversion for telecommunications infrastructure
- FPGA in wired and wireless telecommunications applications
- Satellite communications
- Power system reliability modeling
- RF front end components for telecommunications infrastructure
- Überblick
-
AC-DC power conversion
- Überblick
- AC-DC auxiliary power supplies
- AC-DC power conversion for telecommunications infrastructure
- Adapters and chargers
- Automotive LED lighting systems
- Complete system solutions for smart TVs
- Desktop power supplies
- EV charging
- Industrial power supplies
- PoE power sourcing equipment (PSE)
- Server power supply units (PSU)
- Uninterruptible power supplies (UPS)
- DC-DC power conversion
- Überblick
- Power supply health monitoring
- AKTUELLES IN
- Digital documentation
- Evaluation boards
- Finder & selection tools
- Platforms
- Services
- Simulation & Modeling
- Software
- Tools
- Partners
- Maker
- University Alliance Program
- Überblick
- Bipolar Discs Finder
- Bipolar Module Finder
- Connected Secure Systems Finder
- Diode Rectifier Finder
- ESD Protection Finder
- Evaluation Board Finder
- Gate Driver Finder
- IGBT Discrete Finder
- IGBT Module Finder
- IPM Finder
- Microcontroller Finder
- MOSFET Finder
- PMIC Finder
- Product Finder
- PSOC™ and FMx MCU Board & Kit Finder
- Radar Finder
- Reference Design Finder
- Simulation Model Finder
- Smart Power Switch Finder
- Transceiver Finder
- Voltage Regulator Finder
- Wireless Connectivity Board & Kit Finder
- Überblick
- AIROC™ software & tools
- AURIX™ software & tools
- Drive Core for automotive software development
- iMOTION™ software & tools
- Infineon Smart Power Switches & Gate Driver Tool Suite
- MOTIX™ software & tools
- OPTIGA™ software & tools
- PSOC™ software & tools
- TRAVEO™ software & tools
- XENSIV™ software & tools
- XMC™ software & tools
- Überblick
- CoolGaN™ Simulation Tool (PLECS)
- HiRel Fit Rate Tool
- Infineon Designer
- Interactive product sheet
- IPOSIM Online Power Simulation Platform
- InfineonSpice Offline Simulation Tool
- OPTIREG™ automotive power supply ICs Simulation Tool (PLECS)
- Power MOSFET Simulation Models
- PowerEsim Switch Mode Power Supply Design Tool
- Solution Finder
- XENSIV™ Magnetic Sensor Simulation Tool
- Überblick
- AURIX™ certifications
- AURIX™ development tools
-
AURIX™ Embedded Software
- Überblick
- AURIX™ Applications software
- AURIX™ Artificial Intelligence
- AURIX™ Gateway
- AURIX™ iLLD Drivers
- Infineon safety
- AURIX™ Security
- AURIX™ TC3xx Motor Control Application Kit
- AURIX™ TC4x SW application architecture
- Infineon AUTOSAR
- Communication and Connectivity
- Middleware
- Non AUTOSAR OS/RTOS
- OTA
- AURIX™ Microcontroller Kits
- Überblick
- TRAVEO™ Development Tools
- TRAVEO™ Embedded Software
- Überblick
- XENSIV™ Development Tools
- XENSIV™ Embedded Software
- XENSIV™ evaluation boards
- Überblick
- CAPSENSE™ Controllers Code Examples
- Memories for Embedded Systems Code Examples
- PSOC™ 1 Code Examples for PSOC™ Designer
- PSOC™ 3 Code Examples for PSOC™ Creator
- PSOC™ 3/4/5 Code Examples
- PSOC™ 4 Code Examples for PSOC™ Creator
- PSOC™ 6 Code Examples for PSOC™ Creator
- PSOC™ 63 Code Examples
- USB Controllers Code Examples
- Überblick
- DEEPCRAFT™ AI Hub
- DEEPCRAFT™ Audio Enhancement
- DEEPCRAFT™ Model Converter
-
DEEPCRAFT™ Ready Models
- Überblick
- DEEPCRAFT™ Ready Model for Baby Cry Detection
- DEEPCRAFT™ Ready Model for Cough Detection
- DEEPCRAFT™ Ready Model for Direction of Arrival (Sound)
- DEEPCRAFT™ Ready Model for Factory Alarm Detection
- DEEPCRAFT™ Ready Model for Fall Detection
- DEEPCRAFT™ Ready Model for Gesture Classification
- DEEPCRAFT™ Ready Model for Siren Detection
- DEEPCRAFT™ Ready Model for Snore Detection
- DEEPCRAFT™ Studio
- DEEPCRAFT™ Voice Assistant
- Überblick
- AIROC™ Wi-Fi & Bluetooth EZ-Serial Module Firmware Platform
- AIROC™ Wi-Fi & Bluetooth Linux and Android Drivers
- emWin Graphics Library and GUI for PSOC™
- Infineon Complex Device Driver for Battery Management Systems
- Memory Solutions Hub
- PSOC™ 6 Peripheral Driver Library (PDL) for PSOC™ Creator
- USB Controllers EZ-USB™ GX3 Software and Drivers
- Überblick
- CAPSENSE™ Controllers Configuration Tools EZ-Click
- DC-DC Integrated POL Voltage Regulators Configuration Tool – PowIRCenter
- EZ-USB™ SX3 Configuration Utility
- FM+ Configuration Tools
- FMx Configuration Tools
- Tranceiver IC Configuration Tool
- USB EZ-PD™ Configuration Utility
- USB EZ-PD™ Dock Configuration Utility
- USB EZ-USB™ HX3C Blaster Plus Configuration Utility
- USB UART Config Utility
- XENSIV™ Tire Pressure Sensor Programming
- Überblick
- EZ-PD™ CCGx Dock Software Development Kit
-
FMx Softune IDE
- Überblick
- RealOS™ Real-Time Operating System
- Softune IDE Language tools
- Softune Workbench
- Tool Lineup for F2MC-16 Family SOFTUNE V3
- Tool Lineup for F2MC-8FX Family SOFTUNE V3
- Tool Lineup for FR Family SOFTUNE V6
- Virtual Starter Kit
- Windows 10 operation of released SOFTUNE product
- Windows 7 operation of released SOFTUNE product
- Windows 8 operation of released SOFTUNE product
- ModusToolbox™ Software
- PSOC™ Creator Software
- Radar Development Kit
- RUST
- USB Controllers SDK
- Wireless Connectivity Bluetooth Mesh Helper Applications
- XMC™ DAVE™ Software
- Überblick
- AIROC™ Bluetooth® Connect App Archive
- Cypress™ Programmer Archive
- EZ-PD™ CCGx Power Software Development Kit Archive
- ModusToolbox™ Software Archive
- PSOC™ Creator Archive
- PSOC™ Designer Archive
- PSOC™ Programmer Archive
- USB EZ-PD™ Configuration Utility Archives
- USB EZ-PD™ Host SDK Archives
- USB EZ-USB™ FX3 Archive
- USB EZ-USB™ HX3PD Configuration Utility Archive
- WICED™ Smart SDK Archive
- WICED™ Studio Archive
- Überblick
- Infineon Developer Center Launcher
- Infineon Register Viewer
- Pin and Code Wizard
- Timing Solutions
- Wireless Connectivity
- AKTUELLES IN
- Support
- Training
- Infineon Developer Community
- Neueste Nachrichten
Wirtschaftspresse
Nov. 17, 2025
Wirtschaftspresse
Nov. 12, 2025
Quartalsergebnisse
Nov. 12, 2025
Wirtschaftspresse
Nov. 06, 2025
- Unternehmen
- Unsere Geschichten
- Events
- Presse
- Investor
- Karriere
- Qualität
- Neueste Nachrichten
Wirtschaftspresse
Nov. 17, 2025
Wirtschaftspresse
Nov. 12, 2025
Quartalsergebnisse
Nov. 12, 2025
Wirtschaftspresse
Nov. 06, 2025
Unsere Lehrlinge arbeiten an Hightech-Lösungen und sorgen dafür, dass unsere Mikrochips perfekt produziert und weltweit eingesetzt werden - ob in Smartphones, E-Autos oder Solarenergie. Unsere Produkte tragen dazu bei, den Energieverbrauch in vielen Anwendungen zu senken und die Effizienz zu erhöhen. Dadurch leisten wir einen wichtigen Beitrag zu Umwelt-, Energie- und Nachhaltigkeitsthemen.
Gemeinsam mit Infineon startest Du in eine Zukunft, die einfacher, sicherer und umweltfreundlicher ist als jemals zuvor. Eine Ausbildung bei Infineon ist Dein perfekter Start ins Berufsleben und macht Dich fit für eine vielversprechende Karriere in der Hightech-Branche.
Welche Lehre passt zu dir?
Mit unserer Doppellehre in vier Jahren und optionaler Matura bereiten wir Dich auf eine erfolgreiche Zukunft vor – und das alles im bequemen Jogginganzug auf unserem neuen Lehrlingscampus in Villach.
Elektrotechnik und Metalltechnik in Verbindung mit Industrie 4.0 sind bei modernen Maschinen und Produktionsanlagen oft eng miteinander verbunden. Und genau da kommen Metalltechniker*innen (Maschinenbautechnik) und Elektrotechniker*innen (Anlagen- und Betriebstechnik) zum Einsatz. Während Deiner Praxisausbildung wirst Du auf die Aufgaben in der Instandhaltungstechnik vorbereitet. Als Instandhalter*in reparierst und programmierst Du Geräte und Maschinen und sorgst so dafür, dass die Produktion reibungslos läuft.
Je nach Deinen persönlichen Stärken und Interesse, kannst Du Dich im Laufe der Lehrzeit auf bestimmte Tätigkeiten spezialisieren. Ob du nun eher Interesse an den ‚groben‘ Arbeiten hast, Dich mit viel Fingerspitzengefühl an der Reparatur kleiner Bauteile versuchst, oder über der Verbesserung von Schaltkreisen tüftelst – es ist für jede*n etwas dabei.
Key Facts:
- Praktische & fachliche Ausbildung (Mechanik, Elektronik, Informatik)
- Dauer: 4 Jahre, Start im September
- Möglichkeit zur Lehre mit Matura
- Ausbildung am neuen Lehrlingscampus in Villach
- Je Lehrjahr 10 Wochen Berufsschule (geblockt) in Villach
- Weiterführende Trainings
Als Applikationsentwickler*in erstellst Du in erster Linie Anwendungen für IT Plattformen wie Computer, Smartphones und Tablets. Das Programmieren von Apps, Programmiersprachen sowie die Verwaltung von Datenbanken gehören ebenfalls zur Ausbildung.
Es erwartet Dich eine praktische und fachliche Ausbildung in Villach und Klagenfurt, die in Kooperation mit der ÖBB aufgesetzt wurde. Die Berufsschule besuchst Du im 10-Wochenblock in St. Veit. Ergänzende Trainings runden die Ausbildung ab.
Key Facts:
- Praktische & fachliche Ausbildung (Informatik, Datenbanken, Programmieren)
- Dauer: 4 Jahre, Start im September (Aufnahme alle 2 Jahre)
- Möglichkeit zur Lehre mit Matura
- Ausbildung am Infineon Standort in Villach und Klagenfurt
- Je Lehrjahr 10 Wochen Berufsschule (geblockt) in St. Veit
- Weiterführende Trainings
Mit unserer Doppellehre in vier Jahren und optionaler Matura bereiten wir Dich auf eine erfolgreiche Zukunft vor – und das alles im bequemen Jogginganzug auf unserem neuen Lehrlingscampus in Villach.
Elektrotechnik und Metalltechnik in Verbindung mit Industrie 4.0 sind bei modernen Maschinen und Produktionsanlagen oft eng miteinander verbunden. Und genau da kommen Metalltechniker*innen (Maschinenbautechnik) und Elektrotechniker*innen (Anlagen- und Betriebstechnik) zum Einsatz. Während Deiner Praxisausbildung wirst Du auf die Aufgaben in der Instandhaltungstechnik vorbereitet. Als Instandhalter*in reparierst und programmierst Du Geräte und Maschinen und sorgst so dafür, dass die Produktion reibungslos läuft.
Je nach Deinen persönlichen Stärken und Interesse, kannst Du Dich im Laufe der Lehrzeit auf bestimmte Tätigkeiten spezialisieren. Ob du nun eher Interesse an den ‚groben‘ Arbeiten hast, Dich mit viel Fingerspitzengefühl an der Reparatur kleiner Bauteile versuchst, oder über der Verbesserung von Schaltkreisen tüftelst – es ist für jede*n etwas dabei.
Key Facts:
- Praktische & fachliche Ausbildung (Mechanik, Elektronik, Informatik)
- Dauer: 4 Jahre, Start im September
- Möglichkeit zur Lehre mit Matura
- Ausbildung am neuen Lehrlingscampus in Villach
- Je Lehrjahr 10 Wochen Berufsschule (geblockt) in Villach
- Weiterführende Trainings
Als Applikationsentwickler*in erstellst Du in erster Linie Anwendungen für IT Plattformen wie Computer, Smartphones und Tablets. Das Programmieren von Apps, Programmiersprachen sowie die Verwaltung von Datenbanken gehören ebenfalls zur Ausbildung.
Es erwartet Dich eine praktische und fachliche Ausbildung in Villach und Klagenfurt, die in Kooperation mit der ÖBB aufgesetzt wurde. Die Berufsschule besuchst Du im 10-Wochenblock in St. Veit. Ergänzende Trainings runden die Ausbildung ab.
Key Facts:
- Praktische & fachliche Ausbildung (Informatik, Datenbanken, Programmieren)
- Dauer: 4 Jahre, Start im September (Aufnahme alle 2 Jahre)
- Möglichkeit zur Lehre mit Matura
- Ausbildung am Infineon Standort in Villach und Klagenfurt
- Je Lehrjahr 10 Wochen Berufsschule (geblockt) in St. Veit
- Weiterführende Trainings
- Interesse: Technik, Mathematik, Physik oder Informatik
- Neugierde und Teamfähigkeit: Freude daran Neues zu lernen, Bereitschaft im Team zu arbeiten
- Schulabschluss: Pflichtschulabschluss für die Doppellehre und die IT-Lehre, AHS oder BHS Matura (ohne technischen Hintergrund) für das Format "Lehre UND Studium"
"Ich habe mich für die Doppellehre entschieden, weil ich mich schon immer für Technik interessierte. Anfangs hatte ich Angst vor Vorurteilen als Frau in einen „Männerberuf“ zu gehen, aber mittlerweile finde ich es super. Ich empfehle jeder Frau, die ähnliche Bedenken hat: Folgt eurem Traum! Die Abwechslung und die Kombination aus Metalltechnik und Elektrotechnik machen diese Lehre besonders spannend – man lernt jeden Tag etwas Neues."
Marie, Lehrling “Doppellehre”
Elias, Lehrling “Doppellehre”
"Die Zusammenarbeit mit meinen Kolleg*innen und den Ausbilder*innen bei Infineon ist großartig. Man bekommt immer Unterstützung, wenn man sie braucht – das sorgt für eine gute Atmosphäre und macht das Arbeiten am Campo und in der Firma besonders angenehm.“
Bei Infineon arbeitest Du in einem modernen, internationalen Umfeld und kannst High-tech Zukunftsvisionen in die Praxis umsetzen: Drohnen oder Roboter zum Beispiel, aber auch smarte Lösungen für Autos, Handys und Co. Ab Tag eins bist Du ein fester Bestandteil unseres Teams und erhältst Unterstützung, wann immer Du diese benötigst.
Infineon Austria ist ein staatlich ausgezeichneter Ausbildungsbetrieb und seit mehr als 45 Jahren in der Lehrlingsausbildung aktiv. Wir haben es uns zum Ziel gesetzt, junge Menschen für Technik zu begeistern, um gemeinsam die Zukunft zu gestalten.
- Spannende Ausbildung
- Hightech-Produktion hautnah
- Flexible Arbeitszeitmodelle & Home-Office Möglichkeit
- Trainings und Weiterbildungen
- Kantine
- Gute Bezahlung
- Gesundheitsprogramme
- Viele Karrieremöglichkeiten
Wann kann ich mich für eine Lehrstelle bewerben?
Die Lehrlingsausbildung beginnt jeweils im Herbst. Bewerbungen dafür sind ab Herbst des Vorjahres möglich, die Bewerbungsfrist endet dann im darauffolgenden Frühjahr mit den Auswahlgesprächen vor Ort.
Werden jedes Jahr Lehrlinge aufgenommen?
Grundsätzlich nehmen wir jedes Jahr Lehrlinge auf, aber es werden nicht alle Ausbildungsformate auch jährlich ausgeschrieben.
Die Doppellehre „Elektro- und Metalltechnik“ startet jedes Jahr neu. Die IT Lehre „Applikationsentwicklung & Coding“ sowie das das Duale Ausbildungsformat „Lehre UND Studium“ starten jeweils im Zweijahresrhythmus. Behalte also ab Herbst die Stellenausschreibungen im Auge!
Welche Voraussetzungen muss ich für eine Lehrstelle bei Infineon erfüllen?
Für die Doppellehre „Elektro- & Metalltechnik“ und die IT-Lehre „Applikationsentwicklung & Coding“ musst Du die 9-jährige Schulpflicht erfüllt haben, um Dich bewerben zu können.
Wie läuft der Bewerbungsprozess ab?
1. Bewerbung im Online-Tool
Eine Bewerbung ist grundsätzlich nur online über unsere Karriereseite möglich. Aus Datenschutzgründen nehmen wir keine Bewerbungen per Mail oder über Dritte entgegen. Über das online Tool kannst Du Dich ganz bequem von zu Hause aus bewerben: Lehrstellen Infineon Österreich.
Welche Unterlagen musst Du für eine vollständige Bewerbung übermitteln?
- Anschreiben: Wir möchten uns ein Bild von Dir machen, erzähl uns darin etwas über Dich, warum gerade Du der/die Richtige für die Lehrstelle bist und warum Du Deine Lehre gerne bei Infineon machen möchtest
- Lebenslauf
- Aktuelles Semester- und letztes Abschlusszeugnis (aktuelles Semesterzeugnis kann nachgereicht werden)
- Eventuell vorhandenes Maturazeugnis
2. Überprüfung der Bewerbungsunterlagen
Nachdem wir Deine Bewerbungsunterlagen erhalten haben, werden diese sorgfältig geprüft. Sollte etwas fehlen, wirst Du aufgefordert dies nachzureichen – ist alles vollständig und fällst Du in die engere Wahl, bekommst Du eine Einladung zum Eignungstest.
3. Eignungstest
Um uns einen ersten Überblick über Deine Kenntnisse und Fähigkeiten zu machen, findet ein Eignungstest mit einem theoretischen und praktischen Teil statt. Im theoretischen Teil bekommst Du Aufgaben aus den Bereichen Mathematik, Logik, Sprache, Merkfähigkeit etc. gestellt. Im praktischen Teil löst Du Aufgaben mit unterschiedlichen Materialien, um uns zu zeigen ob bzw. wieviel Erfahrung Du bereits im Umgang mit einfachen Werkzeugen hast.
Mach Dir aber nicht zu viele Gedanken und lass Dich davon nicht abschrecken, mit etwas Konzentration und Vertrauen in Dich selbst ist der Test definitiv machbar!
4. Persönliches Gespräch
Nach der erfolgreichen Absolvierung des Eignungstests laden wir Dich zu einem persönlichen Gespräch ein. Dieses Gespräch dient dem vertiefenden gegenseitigen Kennenlernen. Sei einfach Du selbst und keine Sorge - Nervosität ist dabei ganz normal!
5. Finale Rückmeldung
Wir sind nach dem Gespräch um eine zeitnahe Rückmeldung bemüht.
Was passiert nach der Zusage?
Du hast uns überzeugt und bist jetzt Teil von der Infineon Technologies Austria AG – gratuliere! Im nächsten Schritt benötigen wir nun weitere Unterlagen von Dir (z.B. Reisepasskopie, letztes Schulzeugnis, Meldezettel etc.) um den Ausbildungsvertrag zu erstellen. Zusätzlich findet eine Informationsveranstaltung statt, bei welcher nochmal alle wichtigen Informationen rund um deine Lehrausbildung zusammengefasst werden. Solltest Du noch offene Fragen haben, ist das auch der richtige Zeitpunkt um diese zu klären – so steht Deinem erfolgreichen Lehrstart dann nichts mehr im Wege.
Ich habe eine Absage bekommen, was nun?
Eine Absage ist verständlicherweise enttäuschend, lass Dich aber bitte nicht entmutigen. Versuche es im nächsten Jahr wieder - wenn Du das möchtest - manchmal sind es Kleinigkeiten, die über den Ausgang der Bewerbung entscheiden.
Wie viel verdiene ich als Lehrling bei Infineon?
Das Lehrlingseinkommen unterliegt dem Kollektivvertrag für Arbeiter und Angestellte der Elektro-und Elektronikindustrie. Weitere Informationen findest du hier.
Der neue Aus- und Weiterbildungscampus der Gemeinnützige Personalservice Kärnten GmbH (GPS) im tpv Technologiepark Villach bietet unseren Lehrlingen auf einer Fläche von rund 1.500 m2 modernste Werkstätten, Laborflächen, Lagerräume, Lehrsäle, Sozialräume und Büroräumlichkeiten. Gemeinsam mit der Technischen Akademie St. Andrä (TAK) bilden wir dort unsere Lehrlinge für die Doppellehre „Elektrotechnik & Metalltechnik“ aus.
Abonniere unseren Job-Newsletter und erhalte Informationen zu neuen Stellenausschreibungen.
Hast Du Interesse uns bei Messen oder Events kennenzulernen? Dann informiere Dich über anstehende Events.