Please note that this is an end of life product. See newer alternative product version Please note that this is an end of life product. See newer alternative product version
BGSA144ML10
END OF LIFE
discontinued
RoHS Compliant
Lead-free

BGSA144ML10

END OF LIFE
Ultra high RF voltage antenna tuning SP4T
Datasheet
package

Content could not be loaded

Unfortunately, we were unable to load the content for this section. You may want to refresh the page or try again later.

BGSA144ML10
BGSA144ML10
Datasheet


Product details

  • COFF
    89 fF
  • Control Interface
    MIPI 2.1
  • Frequency Range
    0.4 – 7.125 GHz
  • Halogen-free
    Yes
  • RON
    1.74 Ω
  • Size
    1.1 x 1.5 mm²
  • Switch Type
    SP4T
  • VRFmax
    80 V

OPN
BGSA144ML10E6327XTSA1
Product Status discontinued
Infineon Package
PG-TSLP-10
Package Name N/A
Packing Size 7500
Packing Type TAPE & REEL
Moisture Level 1
Moisture Packing NON DRY
Lead-free Yes
Halogen Free Yes
RoHS Compliant Yes
Country of Assembly (CoA)
MY
Country of Diffusion (CoD)
JP

Product Status discontinued
Infineon Package
PG-TSLP-10
Package Name -
Packing Size 7500
Packing Type TAPE & REEL
Moisture Level 1
Moisture Packing NON DRY
Lead Free
Halogen Free
RoHS Compliant
Country of Assembly (CoA)
MY
Country of Diffusion (CoD)
JP
The BGSA144ML10 is a single-pole four-throws (SP4T) Antenna Tuning switch optimized for RF applications up to 7.125GHz.The BGSA144ML10 is made of 4 low ON resistance / low OFF capacitance series switches and 4 shunt to ground switches enabling on-demand open-reflective or short-reflective OFF ports behavior. This last feature is of great value to reduce antenna engineer development time in case of unwanted antenna resonance or to improve antenna efficiency with less component tuning effort.

Features

  • Low RON resistance of 1.74 Ω at each RF port in ON state
  • Ultra low COFF capacitance of 89 fF in OFF state
  • Individually controlled reflective open or short to ground OFF ports to eliminate unwanted antenna resonances
  • High RF operating voltage handling 80 V in OFF state
  • MIPI RFFE 2.1 compliant control interface
  • External USID_SEL pin enabling 4 default USID addresses
  • Small form factor 1.1 mm x 1.5 mm (MSL1, 260 °C per JEDEC J-STD-020)

Applications

Documents

Design resources

Partner solutions

Developer community