Active
RoHS Compliant

BTS3160D

The BTS3160D is a latching one channel low-side power switch in PG-TO-252-5-13 package providing embedded protective functions.
Data Sheet
package
board
ea.
in stock

Content could not be loaded

Unfortunately, we were unable to load the content for this section. You may want to refresh the page or try again later.

BTS3160D
BTS3160D
ea.
Data Sheet

Product details

  • Channels
    1
  • Classification
    -
  • Control Interface
    Discrete
  • Diagnostic Features
    Output Status
  • Diagnostics
    -
  • EAS/Avalanche Energy
    300 mJ
  • EAS (Energy capability)
    300 mJ
  • Family
    Classic HITFET™ 12V
  • ID
    7.8 A
  • IL(nom)
    9.7 A
  • IL (Short Circuit Current)
    70 A
  • ISC max
    130 A
  • Load Current
    9.7 A
  • Mounting
    SMT
  • Nominal Load Current per channel
    9.7 A
  • Operating Temperature
    -40 °C to 150 °C
  • Planned to be available until at least
    2037
  • Protection strategy
    Latch
  • RDS (on) (@ Tj = 150°C) max
    18 mΩ
  • RDS (on) (@ Tj = 25°C)
    8 mΩ
  • Recommended Operating Voltage max
    40 V
  • toff (Turn OFF time) max
    250 µs
  • ton (Turn ON time) max
    250 µs
  • VDS max
    40 V
Recommended
OPN
BTS3160DAUMA1
Product Status active
Infineon Package
PG-TO252-5
Package Name DPAK 5-pin
Packing Size 2500
Packing Type TAPE & REEL
Moisture Level 3
Moisture Packing DRY
Lead-free No
Halogen Free Yes
RoHS Compliant Yes
Infineon stock last updated:
 ea. in stock

Product Status
Active
Infineon Package
PG-TO252-5
Package Name DPAK 5-pin
Packing Size 2500
Packing Type TAPE & REEL
Moisture Level 3
Moisture Packing DRY
Lead Free
Halogen Free
RoHS Compliant
ea.
in stock
The power transistor is build by a N-channel vertical power MOSFET. The device is controlled by a control chip in Smart Power Technology.The device is able to switch all kind of resistive, inductive and capacitive loads. For lamp loads the lamp-inrush-current, eight- to ten-times the nominal current, has to be considered. The maximal inrush current has to be below the minimum short circuit shutdown current.

Features

  • Compatible with 3.3V/5V microcontrollers
  • Supply by V bb line, down to 6 V
  • Very low over all leakage current
  • Providing digital fault information
  • Electrostatic discharge protection (ESD)
  • Green Product (RoHS compliant)
  • Thermal shutdown with latch
  • AEC Qualified

Documents

Documents

Design resources

Partner solutions

Developer community

{ "ctalist":[ { "link" : "https://community.infineon.com/t5/forums/postpage/choose-node/true", "label" : "Ask the community", "labelEn" : "Ask the community" }, { "link" : "https://community.infineon.com/t5/Forums/ct-p/products", "label" : "View all discussions", "labelEn" : "View all discussions" } ] }