Please note that this is an end of life product. See newer alternative product version Please note that this is an end of life product. See newer alternative product version
END OF LIFE
discontinued
RoHS Compliant
Lead-free

BGSA142M2N12

END OF LIFE
High RF Voltage Antenna Tuning SP4T Switch
Data Sheet
package

Content could not be loaded

Unfortunately, we were unable to load the content for this section. You may want to refresh the page or try again later.

BGSA142M2N12
BGSA142M2N12
Data Sheet

Product details

  • Control Interface
    MIPI 2.0
  • Frequency Range
    0.4 - 6.0 GHz
  • Halogen-free
    yes
  • Size
    1.5 x 1.5 mm²
  • Switch Type
    SP4T
OPN
BGSA142M2N12E6327XTSA1
Product Status discontinued
Infineon Package
PG-TSNP-12
Package Name N/A
Packing Size 7500
Packing Type TAPE & REEL
Moisture Level N/A
Moisture Packing NON DRY
Lead-free Yes
Halogen Free Yes
RoHS Compliant Yes
Infineon stock last updated:

Product Status discontinued
Infineon Package
PG-TSNP-12
Package Name -
Packing Size 7500
Packing Type TAPE & REEL
Moisture Level -
Moisture Packing NON DRY
Lead Free
Halogen Free
RoHS Compliant
The BGSA142M2N12 is a versatile direct mapping Single-Pole Quad Throw (SP4T) RF switch optimized for low COFF as well as low RON enabling applications up to 6.0 GHz. Including a MIPI RFFE digital control interface, all the throw states can be programmed in the same RFFE command enabling SP4T, SP3T, SPDT along with SPST topology for a better flexibility in RF front-end designs.
The BGSA142M2N12 includes 4 low RON and high RF voltage ports making it ideal for antenna tuning and tunable matching network applications. RFC as well as RF1, RF2, RF3 and RF4 can handle high RF voltage (bidirectional RF voltage handling). Due to its very high RF voltage ruggedness on all RF ports, it is suited for switching any reactive devices such as inductors and capacitors without significant losses.
Unlike GaAs technology, the 0.1 dB compression point exceeds the switch maximum input power level, resulting in linear performance at all signal levels and external DC blocking capacitors at the RF ports are only required if DC voltage is applied externally.

Features

  • Designed for high linearity and high RF voltage tuning applications
  • Multiple selectable switch configurations:
  • Each throw directly and independently controlled
  • Low RON resistance of 1.75 Ω at each port in ON state
  • Low COFF capacitance of 110 fF at each port in OFF state
  • High RF operating voltage of 72 V at RFx and 67 V at RFC in OFF state
  • Low harmonic generation
  • MIPI 2.0 RFFE control interface
  • 4 USID addresses enabled by external condition at USID_sel pin and SCLK/SDATA swap mode
  • Supply voltage range: 1.65 to 3.6 V
  • No RF parameter change within supply voltage range
  • Small form factor 1.5 mm x 1.5 mm (MSL1, 260° C per JEDEC J-STD-020)
  • RoHS and WEEE compliant package

Applications

Documents

Documents

Design resources

Partner solutions

Developer community

{ "ctalist":[ { "link" : "https://community.infineon.com/t5/forums/postpage/choose-node/true", "label" : "Ask the community", "labelEn" : "Ask the community" }, { "link" : "https://community.infineon.com/t5/Forums/ct-p/products", "label" : "View all discussions", "labelEn" : "View all discussions" } ] }