not for new design
RoHS Compliant
Lead-free

BGSA11GN10

Data Sheet
package
ea.
in stock

Content could not be loaded

Unfortunately, we were unable to load the content for this section. You may want to refresh the page or try again later.

BGSA11GN10
BGSA11GN10
ea.
Data Sheet

Product details

  • COFF
    250 fF
  • Control Interface
    GPIO
  • Frequency Range
    0.1 - 6.0 GHz
  • Halogen-free
    yes
  • RON
    1 Ω
  • Size
    1.1 x 1.5 mm²
  • Switch Type
    2xSPST
  • VRFmax
    36 V
OPN
BGSA11GN10E6327XTSA1
Product Status not for new design
Infineon Package
TSNP-10-1
Package Name N/A
Packing Size 7500
Packing Type TAPE & REEL
Moisture Level 1
Moisture Packing NON DRY
Lead-free Yes
Halogen Free Yes
RoHS Compliant Yes
Infineon stock last updated:
 ea. in stock

Product Status not for new design
Infineon Package
TSNP-10-1
Package Name -
Packing Size 7500
Packing Type TAPE & REEL
Moisture Level 1
Moisture Packing NON DRY
Lead Free
Halogen Free
RoHS Compliant
ea.
in stock
The BGSA11GN10 is a Dual Single Pole Single Throw (SPST) RF antenna tuning switch optimized for low RON enabling applications up to 6.0 GHz. This single supply chip integrates on-chip CMOS logic driven by a simple, single-pin CMOS or TTL compatible control input signal. Unlike GaAs technology, the 0.1 dB compression point exceeds the switch maximum input power level, resulting in linear performance at all signal levels and external DC blocking capacitors at the RF ports are only required if DC voltage is applied externally. Due to its very high RF voltage ruggedness it is suited for switching any reactive devices such as inductors and capacitors in RF matching circuits without significant losses in quality factors.

Features

  • High-linearity Dual SPST for antenna tuning switching applications
  • Ultra-Low RON  of 0.79 Ω  in ON state for each SPST, 0.38 Ω using both SPST in parallel
  • Ultra-Low COFF of 250 fF in OFF state
  • High max RF voltage OFF state handling: 36 V peak (72 Vp-p)
  • Low harmonic generation
  • No power supply blocking required
  • Supply voltage: 1.65 to 3.6 V
  • Control voltage: 1.35 to 3.3 V (control high)
  • Suitable for EDGE / C2K / LTE / WCDMA Applications
  • 0.1 to 6.0 GHz coverage
  • Small form factor 1.1 mm x 1.5 mm
  • 400 µm pad pitch
  • RoHS and WEEE compliant package

Documents

Documents

Design resources

Partner solutions

Developer community

{ "ctalist":[ { "link" : "https://community.infineon.com/t5/forums/postpage/choose-node/true", "label" : "Ask the community", "labelEn" : "Ask the community" }, { "link" : "https://community.infineon.com/t5/Forums/ct-p/products", "label" : "View all discussions", "labelEn" : "View all discussions" } ] }