Please note that this is an end of life product. See newer alternative product version Please note that this is an end of life product. See newer alternative product version
BGSA403ML10
END OF LIFE
discontinued
RoHS Compliant
Lead-free

BGSA403ML10

END OF LIFE
Four throws low resistance antenna tuning switch
Datasheet
package

Content could not be loaded

Unfortunately, we were unable to load the content for this section. You may want to refresh the page or try again later.

BGSA403ML10
BGSA403ML10
Datasheet


Product details

  • COFF
    205 fF
  • Control Interface
    MIPI 2.1
  • Frequency Range
    0.4 – 7.125 GHz
  • Halogen-free
    Yes
  • RON
    0.98 Ω
  • Size
    1.1 x 1.5 mm²
  • Switch Type
    4xSPST
  • VRFmax
    48 V

OPN
BGSA403ML10E6327XTSA1
Product Status discontinued
Infineon Package
PG-TSLP-10
Package Name N/A
Packing Size 7500
Packing Type TAPE & REEL
Moisture Level 1
Moisture Packing NON DRY
Lead-free Yes
Halogen Free Yes
RoHS Compliant Yes

Product Status discontinued
Infineon Package
PG-TSLP-10
Package Name -
Packing Size 7500
Packing Type TAPE & REEL
Moisture Level 1
Moisture Packing NON DRY
Lead Free
Halogen Free
RoHS Compliant
The BGSA403ML10 is a versatile shunt to ground 4 x single-pole single-throw (4xSPST) RF antenna tuning switch. It is optimized for low COFF as well as low RON enabling applications up to 7.125GHz. The BGSA403ML10 is ideal for antenna tuning application. This chip integrates on-chip CMOS logic and power supply regulation. Its digital control interface is compliant with MIPI2.1 RFFE specification and each switch throw can be programmed individually or all together in the same RFFE command frame. Up to 4 instantiations of the same device can be controlled using the same RFFE bus thanks to its 4 states USID_SEL pin unique feature.

Features

  • Low RON resistance of 0.98 Ω at each port in ON state
  • Low COFF capacitance of 205 fF at each port in OFF state
  • High RF operating peak voltage handling of typical 50 V in OFF state
  • MIPI RFFE 2.1 control interface
  • Extremely low current consumption of 22 µA
  • 4 USID addresses enabled by external condition at USID_SEL pin
  • Small form factor 1.1 mm x 1.5 mm (MSL1, 260 °C per JEDEC J-STD-020)
Documents

Design resources

Partner solutions

Developer community