TLE987X EVALB_TQFP

Overview

TLE987X EVALB_TQFP provides an easy-to-use tool for getting familiar with TLE987x devices

The TLE987X EVALB_TQFP offers complete evaluation of all functions and peripherals of the TLE987x product family and allows direct connection to a BLDC motor via MOSFETs in B6-Bridge configuration. It includes: B6-Bridge for BLDC motor drive, UART and LIN for communication, direct access to all device I/Os and an onboard debugger.

Summary of Features

• 3-phase B6-Bridge
• Integrated LIN
• Onboard debugger
• Reverse polarity protection
• Debug LEDs
• LIN Bootstrap loader
• Sensor interfaces (For HALL and TMR)
• SPI header
• EMI filter

Tools & Software

Infineon Embedded Power ICs are supported by a complete development tool chain provided by Infineon and third party vendors. The tool chain includes compilers, debuggers, evaluation boards, LIN low level drivers and configuration tools as well as variety of example software code.

For more information about the tool chain installation steps, watch our video "Toolchain Installation for Embedded Power ICs / TLE98xx".

Toolchain Installation Steps Company Description
STEP 1

Download and Install

Keil® µVision5

  • Arm® Keil® µVision is an integrated development environment which consists of code editor, compiler and debugger.

  • To learn how to use Arm® Keil® µVision 5, check out our video "Get your motor spinning".
STEP 2

Download

Config Wizard

    
  • Infineon provides the Config Wizard free of charge which is designed for configuration of chip modules. Config Wizard supports easy configuring of Embedded Power peripherals.
  • Config Wizard V2 can be installed via the Infineon Toolbox. If you don`t have the Infineon Toolbox yet, please go to Infineon Toolbox and enjoy the release management for updates.*
STEP 3

Download and Install

Segger J-Link Driver

 SEGGER
  • SEGGER J-Link is a widely used driver for "on-board" or "stand-alone" debugger.
STEP 4 Download the SDK via 
µVision 5 Pack Installer 
(see step 1)		 infineon_logo_neu
  • The Embedded Power Software Development Kit (SDK) is a low level driver library which can be downloaded within Keil® µVision via the "Pack Installer"

*If you still need the Config Wizard V1, please follow the link.

 

Videos

Get your motor spinning by using the TLE9879 Evalkit for BLDC Motor Control

In this video we show you how to get started by using example code for our TLE9879 Evalkit. Two examples are provided: Spin your motor with our FOC example and how to adjust the example code for a simple blinky.

Toolchain Installation for Embedded Power ICs / TLE98xx

This video will show you all necessary steps to install the toolchain to get started using our TLE98xx family. The toolchain can be used for all Embedded Power IC families.

Unboxing of TLE9879 Evalkit for BLDC Motor Control

Welcome to this short introduction to the evaluation kit of our 3-Phase Bridge Driver IC family - the perfect fit for Automotive motor control applications such as auxiliary pumps and fans or any other BLDC driven system. Watch the video and get started!

Watch more than 30 videos on our Video Hub

Click here
Support