BTH50030-1LUA
Active and preferred
RoHS Compliant

BTH50030-1LUA

RDS (on) @ Tj = 25°C: 3 mΩ | Nominal Load Current per channel: 25 A | IL (Short Circuit Current): 55 A | ISO 26262-ready
Datasheet
package
board

Content could not be loaded

Unfortunately, we were unable to load the content for this section. You may want to refresh the page or try again later.

BTH50030-1LUA
BTH50030-1LUA
Datasheet


Product details

  • Certifications
    ISO 26262-ready
  • Channels
    1
  • Classification
    ISO 26262-ready
  • Diagnostics
    Sense
  • Family
    Power PROFET™ + 24/48V
  • IL (Short Circuit Current)
    55 A
  • Load Current
    25 A
  • Mounting
    SMT
  • Nominal Load Current per channel
    25 A
  • Operating Temperature range
    -40 °C to 150 °C
  • Planned to be available until at least
    2039
  • Qualification
    Automotive
  • Recommended Operating Voltage range
    8 V to 60 V
  • toff (Turn OFF time) max
    225 µs
  • ton (Turn ON time) max
    150 µs

Recommended
OPN
BTH500301LUAAUMA1
Product Status active and preferred
Infineon Package
PG-HSOF-8
Package Name N/A
Packing Size 2000
Packing Type TAPE & REEL
Moisture Level 3
Moisture Packing DRY
Lead-free No
Halogen Free Yes
RoHS Compliant Yes
Infineon stock last updated:
 ea. in stock

Product Status
Active
Infineon Package
PG-HSOF-8
Package Name -
Packing Size 2000
Packing Type TAPE & REEL
Moisture Level 3
Moisture Packing DRY
Lead Free
Halogen Free
RoHS Compliant
Introducing the new member of the Power PROFET™ + 24/48V family, the BTH50030-1LUA is a 3.0 mΩ single channel smart high-side power switch, embedded in a 8 pin TO-leadless package, providing protective functions and diagnosis. It is especially designed to drive high current loads up to 25 A in a 24 V or 48 V power net, for applications like heaters, glow plugs, fans and pumps in the harsh automotive environment.

Features

  • RDS (on)3 mΩ typical
  • For 24 V and 48 V power nets
  • Load dump robustness up to 70 V
  • Compatible to cranking pulses
  • Integrated diagnostic functions
  • Integrated protection functions
  • Over-current protection
  • Over-load protection
  • Over-temperature protection
  • Over-power protection
  • Low stand-by current 7 µA
  • AEC-Q100 qualification

Benefits

  • Reliable power distribution
  • ISO 26262-ready
  • Accurate current sensing
  • Supports long wires
  • Ideal for limited board space
  • Leadless power package

Applications

Documents

Design resources

Partner solutions

Developer community