- ASIC
- Battery management ICs
- Clocks and timing solutions
- ESD and surge protection devices
- Automotive Ethernet
- Evaluation Boards
- High reliability
- Isolation
- Memories
- Microcontroller
- Power
- RF
- Security and smart card solutions
- Sensor technology
- Small signal transistors and diodes
- Transceivers
- Universal Serial Bus (USB)
- Wireless connectivity
- Search Tools
- Technology
- Packages
- Product Information
- Ordering
- Overview
- Automotive Ethernet PHY for in-vehicle networking
- Automotive Ethernet Switches for in-vehicle networking
- Overview
- Embedded flash IP solutions
- Flash+RAM MCP solutions
- F-RAM (Ferroelectric RAM)
- NOR flash
- nvSRAM (non-volatile SRAM)
- PSRAM – Pseudostatic RAM
- Radiation hardened and high-reliability memories
- SRAM (static RAM)
- Wafer and die memory solutions
- Overview
- 32-bit FM Arm® Cortex® Microcontroller
- 32-bit AURIX™ TriCore™ microcontroller
- 32-bit PSOC™ Arm® Cortex® microcontroller
- 32-bit TRAVEO™ T2G Arm® Cortex® microcontroller
- 32-bit XMC™ industrial microcontroller Arm® Cortex®-M
- Legacy microcontroller
- Motor control SoCs/SiPs
- Sensing controllers
- Overview
- AC-DC power conversion
- Automotive conventional powertrain ICs
- Class D audio amplifier ICs
- Contactless power and sensing ICs
- DC-DC converters
- Diodes and thyristors (Si/SiC)
- Gallium nitride (GaN)
- Gate driver ICs
- IGBTs – Insulated gate bipolar transistors
- Intelligent power modules (IPM)
- LED driver ICs
- Motor drivers
- MOSFETs
- Power modules
- Power supply ICs
- Protection and monitoring ICs
- Silicon carbide (SiC)
- Smart power switches
- Solid state relays
- Wireless charging ICs
- Overview
- Antenna cross switches
- Antenna tuners
- Bias and control
- Coupler
- Driver amplifiers
- Rad hard microwave and RF
- Low noise amplifiers (LNAs)
- RF diode
- RF switches
- RF transistors
- Wireless control receiver
- Overview
- Calypso® products
- CIPURSE™ products
- Contactless memories
- OPTIGA™ embedded security solutions
- SECORA™ security solutions
- Security controllers
- Smart card modules
- Smart solutions for government ID
- Overview
- ToF 3D image sensors
- Current sensors
- Gas sensors
- Inductive position sensors
- MEMS microphones
- Pressure sensors
- Radar sensors
- Magnetic position sensors
- Magnetic speed sensors
- Overview
- Bipolar transistors
- Diodes
- Small signal/small power MOSFET
- Overview
- Automotive transceivers
- Control communication
- Powerline communications
- Overview
- USB 2.0 peripheral controllers
- USB 3.2 peripheral controllers
- USB hub controllers
- USB PD high-voltage microcontrollers
- USB-C AC-DC and DC-DC charging solutions
- USB-C charging port controllers
- USB-C Power Delivery controllers
- Overview
- AIROC™ Automotive wireless
- AIROC™ Bluetooth® and multiprotocol
- AIROC™ connected MCU
- AIROC™ Wi-Fi + Bluetooth® combos
- Overview
- Commercial off-the-shelf (COTs) memory portfolio
- Defense memory portfolio
- High-reliability power conversion and management
- Overview
- Rad hard microwave and RF
- Radiation hardened power
- Space memory portfolio
- Overview
- Parallel NOR flash
- SEMPER™ NOR flash family
- SEMPER™ X1 LPDDR flash
- Serial NOR flash
- Overview
- FM0+ 32-bit Arm® Cortex®-M0+ microcontroller (MCU) families
-
FM3 32-bit Arm® Cortex®-M3 microcontroller (MCU) families
- Overview
- FM3 CY9AFx1xK series Arm® Cortex®-M3 microcontroller (MCU)
- FM3 CY9AFx1xL/M/N series Arm® Cortex®-M3 microcontroller (MCU)
- FM3 CY9AFx2xK/L series Arm® Cortex®-M3 microcontroller (MCU)
- FM3 CY9AFx3xK/L series ultra-low leak Arm® Cortex®-M3 microcontroller (MCU)
- FM3 CY9AFx4xL/M/N series low power Arm® Cortex®-M3 microcontroller (MCU)
- FM3 CY9AFx5xM/N/R series low power Arm® Cortex®-M3 microcontroller (MCU)
- FM3 CY9AFxAxL/M/N series ultra-low leak Arm® Cortex®-M3 microcontroller (MCU)
- FM3 CY9BFx1xN/R high-performance series Arm® Cortex®-M3 microcontroller (MCU)
- FM3 CY9BFx1xS/T high-performance series Arm® Cortex®-M3 microcontroller (MCU)
- FM3 CY9BFx2xJ series Arm® Cortex®-M3 microcontroller (MCU)
- FM3 CY9BFx2xK/L/M series Arm® Cortex®-M3 microcontroller (MCU)
- FM3 CY9BFx2xS/T series Arm® Cortex®-M3 microcontroller (MCU)
-
FM4 32-bit Arm® Cortex®-M4 microcontroller (MCU) families
- Overview
- FM4 CY9BFx6xK/L high-performance series Arm® Cortex®-M4F microcontroller (MCU)
- FM4 CY9BFx6xM/N/R high-performance series Arm® Cortex®-M4F microcontroller (MCU)
- FM4 S6E2C high-performance series Arm® Cortex®-M4F microcontroller (MCU)
- FM4 S6E2G series connectivity Arm® Cortex®-M4F microcontroller (MCU)
- FM4 S6E2H high-performance series Arm® Cortex®-M4F microcontroller (MCU)
- Overview
-
32-bit TriCore™ AURIX™ – TC2x
- Overview
- AURIX™ family – TC21xL
- AURIX™ family – TC21xSC (wireless charging)
- AURIX™ family – TC22xL
- AURIX™ family – TC23xL
- AURIX™ family – TC23xLA (ADAS)
- AURIX™ family – TC23xLX
- AURIX™ family – TC264DA (ADAS)
- AURIX™ family – TC26xD
- AURIX™ family – TC27xT
- AURIX™ family – TC297TA (ADAS)
- AURIX™ family – TC29xT
- AURIX™ family – TC29xTT (ADAS)
- AURIX™ family – TC29xTX
- AURIX™ TC2x emulation devices
-
32-bit TriCore™ AURIX™ – TC3x
- Overview
- AURIX™ family - TC32xLP
- AURIX™ family – TC33xDA
- AURIX™ family - TC33xLP
- AURIX™ family – TC35xTA (ADAS)
- AURIX™ family – TC36xDP
- AURIX™ family – TC37xTP
- AURIX™ family – TC37xTX
- AURIX™ family – TC38xQP
- AURIX™ family – TC39xXA (ADAS)
- AURIX™ family – TC39xXX
- AURIX™ family – TC3Ex
- AURIX™ TC37xTE (emulation devices)
- AURIX™ TC39xXE (emulation devices)
- 32-bit TriCore™ AURIX™ – TC4x
- Overview
- PSOC™ 4 Arm® Cortex®-M0/M0+
- PSOC™ 4 HV Arm® Cortex®-M0+
- PSOC™ 5 LP Arm® Cortex®-M3
- PSOC™ 6 Arm® Cortex®-M4/M0+
- PSOC™ Multitouch Touchscreen Controller
- PSOC™ Control C3 Arm® Cortex®-M33
- PSOC™ Automotive 4: Arm® Cortex®-M0/M0+
- PSOC™ Edge Arm® Cortex® M55/M33
- Overview
- 32-bit TRAVEO™ T2G Arm® Cortex® for body
- 32-bit TRAVEO™ T2G Arm® Cortex® for cluster
- Overview
- 32-bit XMC1000 industrial microcontroller Arm® Cortex®-M0
- 32-bit XMC4000 industrial microcontroller Arm® Cortex®-M4
- XMC5000 Industrial Microcontroller Arm® Cortex®-M4F
- 32-bit XMC7000 Industrial Microcontroller Arm® Cortex®-M7
- Overview
- Legacy 32-bit MCU
- Legacy 8-bit/16-bit microcontroller
- Other legacy MCUs
- Overview
- AC-DC integrated power stage - CoolSET™
- AC-DC PWM-PFC controller
- Overview
- Bridge rectifiers & AC switches
- CoolSiC™ Schottky diodes
- Diode bare dies
- Silicon diodes
- Thyristor / Diode Power Modules
- Thyristor soft starter modules
- Thyristor/diode discs
- Overview
- Automotive gate driver ICs
- EiceDRIVER™ SiC MOSFET gate driver ICs
- Isolated Gate Driver ICs
- Gate driver ICs for GaN HEMTs
- Half-bridge drivers
- High side gate drivers
- Level-Shift Gate Driver ICs
- Low-Side Drivers
- Three phase drivers
- Transformer Driver ICs
- Overview
- AC-DC LED driver ICs
- Ballast IC
- DC-DC LED driver IC
- LED dimming interface IC
- Linear LED driver IC
- LITIX™ - Automotive LED Driver IC
- NFC wireless configuration IC with PWM output
- VCSEL driver
- Overview
- BLDC motor drivers
- BDC motor drivers
- Stepper & servo motor drivers
- Motor drivers with MCU
- Bridge drivers with MOSFETs
- Gate driver ICs
- Overview
- Automotive MOSFET
- Dual MOSFETs
- MOSFET (Si & SiC) Modules
- N-channel depletion mode MOSFET
- N-channel MOSFETs
- P-channel MOSFETs
-
Silicon carbide CoolSiC™ MOSFETs
- Overview
- Silicon Carbide MOSFET modules
- Silicon carbide MOSFET discretes
- Silicon carbide MOSFETs bare dies
- 400 V / 440 V Silicon Carbide MOSFETs
- 650 V Silicon Carbide MOSFETs
- 750 V Silicon Carbide MOSFETs
- 1200 V Silicon Carbide MOSFETs
- 2000 V Silicon Carbide MOSFETs
- 2300 V Silicon Carbide MOSFETs
- 3300 V Silicon Carbide MOSFETs
- 1700 V Silicon Carbide MOSFETs
- Small signal/small power MOSFET
- Overview
- IGBT modules
- MOSFET (Si & SiC) Modules
- Intelligent power modules (IPM)
- Diodes and thyristors (Si/SiC)
- Automotive IGBT and CoolSiC™ MOSFET modules
- High density power modules
- Overview
- Automotive transceivers
- Linear voltage regulators for automotive applications
- OPTIREG™ PMIC
- OPTIREG™ switcher
- OPTIREG™ System Basis Chips (SBC)
- Overview
- eFuse
- High-side switches
- Low-side switches
- Multichannel SPI Switches & Controller
- Overview
- Radar sensors for automotive
- Radar sensors for IoT
- Overview
- EZ-USB™ CX3 MIPI CSI2 to USB 3.0 camera controller
- EZ-USB™ FX10 & FX5N USB 10Gbps peripheral controller
- EZ-USB™ FX20 USB 20 Gbps peripheral controller
- EZ-USB™ FX3 USB 5 Gbps peripheral controller
- EZ-USB™ FX3S USB 5 Gbps peripheral controller with storage interface
- EZ-USB™ FX5 USB 5 Gbps peripheral controller
- EZ-USB™ SD3 USB 5 Gbps storage controller
- EZ-USB™ SX3 FIFO to USB 5 Gbps peripheral controller
- Overview
- EZ-PD™ CCG3 USB type-C port controller PD
- EZ-PD™ CCG3PA USB-C and PD
- EZ-PD™ CCG3PA-NFET USB-C PD controller
- EZ-PD™ CCG7x consumer USB-C Power Delivery & DC-DC controller
- EZ-PD™ PAG1: power adapter generation 1
- EZ-PD™ PAG2: Power Adapter Generation 2
- EZ-PD™ PAG2-PD USB-C PD Controller
- Overview
- EZ-PD™ ACG1F one-port USB-C controller
- EZ-PD™ CCG2 USB Type-C port controller
- EZ-PD™ CCG3PA Automotive USB-C and Power Delivery controller
- EZ-PD™ CCG4 two-port USB-C and PD
- EZ-PD™ CCG5 dual-port and CCG5C single-port USB-C PD controllers
- EZ-PD™ CCG6 one-port USB-C & PD controller
- EZ-PD™ CCG6_CFP and EZ-PD™ CCG8_CFP Dual-Single-Port USB-C PD
- EZ-PD™ CCG6DF dual-port and CCG6SF single-port USB-C PD controllers
- EZ-PD™ CCG7D Automotive dual-port USB-C PD + DC-DC controller
- EZ-PD™ CCG7S Automotive single-port USB-C PD solution with a DC-DC controller + FETs
- EZ-PD™ CCG8 dual-single-port USB-C PD
- EZ-PD™ CMG1 USB-C EMCA controller
- EZ-PD™ CMG2 USB-C EMCA controller with EPR
- LATEST IN
- Aerospace and defense
- AI and data center
- Automotive
- Communications
- Consumer electronics
- Health and lifestyle
- Home appliances
- Industrial
- Security solutions
- Smart home and building
- Solutions
- Overview
- Defense applications
- Space applications
- Overview
- Data center power solutions
- Edge computing
- Machine Learning Edge AI
- Overview
- ADAS & autonomous driving
- Automotive body electronics & power distribution
- Automotive LED lighting systems
- Chassis control & safety
- Electric vehicle drivetrain system
- EV thermal management system
- In-vehicle infotainment & HMI
- Light electric vehicle solutions
- Overview
- Satellite communications
- Telecommunications infrastructure
- Overview
- Power adapters and chargers
- Complete system solutions for smart TVs
- Mobile device and smartphone solutions
- Power tools
- Semiconductor solutions for home entertainment applications
- Smart conference systems
- Multicopters and drones
- AR and smart glasses
- Overview
- Power adapters and chargers
- Asset Tracking
- Battery formation and testing
- Electric forklifts
- Battery energy storage (BESS)
- EV charging
- High voltage solid-state power distribution
- Industrial automation
- Industrial motor drives and controls
- Industrial robots
- LED lighting system design
- Light electric vehicle solutions
- Power tools
- Power transmission and distribution
- Traction
- Uninterruptible power supplies (UPS)
- Digital health
- Robotics
- Wind power
- Hydrogen electrolysis
- Renewables
- Photovoltaic
- Industrial power supplies
- Overview
- Device authentication and brand protection
- Embedded security for the Internet of Things (IoT)
- eSIM applications
- Government identification
- Mobile security
- Payment solutions
- Access control and ticketing
- Overview
- Domestic robots
- Heating ventilation and air conditioning (HVAC)
- Home and building automation
- PC accessories
- Semiconductor solutions for home entertainment applications
- Overview
- Battery management systems (BMS)
- Connectivity
- Human Machine Interface
- Machine Learning Edge AI
- Motor control
- Power conversion
- Security
- Sensor solutions
- System diagnostics and analytics
- Overview
- FPGAs in datacenter applications
- Power system reliability modeling
-
Server rack power management
- Overview
- Server power supply units (PSU)
- Server battery backup units (BBU)
- Medium voltage IBC (48 V)
- Ampere CPU voltage regulator Ics
- Intel CPU voltage regulator Ics
- AMD CPU voltage regulator Ics
- AI accelerator cards
- SmartNIC cards
- Network switches for AI data centers and server racks
- Server power path protection
- Data center power distribution
- Overview
- Automotive auxiliary systems
- Automotive gateway
- Automotive power distribution
- Body control modules (BCM)
- Comfort & convenience electronics
- Zonal DC-DC converter 48 V-12 V
- Zone control unit
- Overview
- Automotive animated LED lighting system
- Automotive LED front single light functions
- Automotive LED rear single light functions
- Full LED headlight system - multi-channel LED driver
- LED drivers (electric two- & three-wheelers)
- LED pixel light controller - supply & communication
- Static interior ambient LED light
- Overview
- Active suspension control
- Automotive braking solutions
- Automotive steering solutions
- Chassis domain control
- Overview
-
Automotive BMS
- Overview
- Automotive battery cell monitoring & balancing
- Automotive battery control unit (BCU)
- Automotive battery isolated communication
- Automotive battery management system (BMS) - 12 V to 24 V
- Automotive battery management system (BMS) - 48 V
- Automotive battery management system (BMS) - high-voltage
- Automotive battery pack monitoring
- Automotive battery passport & event logging
- Automotive battery protection & disconnection
- Automotive current sensing & coulomb counting
- BMS (electric two- & three-wheelers)
- EV charging
- EV inverters
- EV power conversion & OBC
- FCEV powertrain system
- Overview
- AC-DC power conversion for telecommunications infrastructure
- DC-DC power conversion for telecommunications infrastructure
- FPGA in wired and wireless telecommunications applications
- Power system reliability modeling
- RF front end components for telecommunications infrastructure
- Memory solutions for cellular base stations
- Security solutions for cellular base stations
- Overview
- Audio amplifier solutions
- Complete system solutions for smart TVs
- Distribution audio amplifier unit solutions
- Home theater installation speaker system solutions
- Party speaker solutions
- PoE audio amplifier unit solutions
- Portable speaker solutions
- Powered active speaker systems
- Remote control
- Smart speaker designs
- Soundbar solutions
- Overview
- Data center power solutions
- Digital input/output (I/O) modules
- DIN rail power supply solutions
- Home and building automation
- Industrial HMI Monitors and Panels
- Industrial motor drives and controls
- Industrial PC
- Industrial robots
- Machine vision
- Mobile robots (AGV, AMR)
- Programmable logic controller (PLC)
- Solid-state circuit breaker (SSCB)
- Uninterruptible power supplies (UPS)
- Overview
- Durable healthcare equipment
- Disposable healthcare equipment
- Healthcare wearables
- Overview
- Automotive BMS
- Industrial and consumer BMS
- Overview
- AC-DC power conversion
- DC-DC power conversion
- Overview
- Power supply health monitoring
- LATEST IN
- Digital documentation
- Boards & Kits
- Finder & selection tools
- Platforms
- Services
- Simulation & Modeling
- Software
- Tools
- Partners
- Infineon for Makers
- University Alliance Program
- Overview
- Bipolar Discs Finder
- Bipolar Module Finder
- Connected Secure Systems Finder
- Diode Rectifier Finder
- ESD Protection Finder
- Evaluation Board Finder
- Gate Driver Finder
- IGBT Discrete Finder
- IGBT Module Finder
- IPM Finder
- Microcontroller Finder
- MOSFET Finder
- PMIC Finder
- Product Finder
- PSOC™ and FMx MCU Board & Kit Finder
- Radar Finder
- Reference Design Finder
- Simulation Model Finder
- Smart Power Switch Finder
- Transceiver Finder
- Voltage Regulator Finder
- Wireless Connectivity Board & Kit Finder
- Overview
- AIROC™ software & tools
- AURIX™ software & tools
- DRIVECORE for automotive software development
- iMOTION™ software & tools
- Infineon Smart Power Switches & Gate Driver Tool Suite
- MOTIX™ software & tools
- OPTIGA™ software & tools
- PSOC™ software & tools
- TRAVEO™ software & tools
- XENSIV™ software & tools
- XMC™ software & tools
- Overview
- CoolGaN™ Simulation Tool (PLECS)
- HiRel Fit Rate Tool
- Infineon Designer
- Interactive product sheet
- IPOSIM Online Power Simulation Platform
- InfineonSpice Offline Simulation Tool
- OPTIREG™ automotive power supply ICs Simulation Tool (PLECS)
- Power MOSFET Simulation Models
- PowerEsim Switch Mode Power Supply Design Tool
- Solution Finder
- XENSIV™ Magnetic Sensor Simulation Tool
- Overview
- AURIX™ certifications
- AURIX™ development tools
-
AURIX™ Embedded Software
- Overview
- AURIX™ Applications software
- AURIX™ Artificial Intelligence
- AURIX™ Gateway
- AURIX™ iLLD Drivers
- Infineon safety
- AURIX™ Security
- AURIX™ TC3xx Motor Control Application Kit
- AURIX™ TC4x SW application architecture
- Infineon AUTOSAR
- Communication and Connectivity
- Middleware
- Non AUTOSAR OS/RTOS
- OTA
- AURIX™ Microcontroller Kits
- Overview
- TRAVEO™ Development Tools
- TRAVEO™ Embedded Software
- Overview
- XENSIV™ Development Tools
- XENSIV™ Embedded Software
- XENSIV™ evaluation boards
- Overview
- CAPSENSE™ Controllers Code Examples
- Memories for Embedded Systems Code Examples
- PSOC™ 1 Code Examples for PSOC™ Designer
- PSOC™ 3 Code Examples for PSOC™ Creator
- PSOC™ 3/4/5 Code Examples
- PSOC™ 4 Code Examples for PSOC™ Creator
- PSOC™ 6 Code Examples for PSOC™ Creator
- PSOC™ 63 Code Examples
- USB Controllers Code Examples
- Overview
- DEEPCRAFT™ AI Hub
- DEEPCRAFT™ Audio Enhancement
- DEEPCRAFT™ Model Converter
-
DEEPCRAFT™ Ready Models
- Overview
- DEEPCRAFT™ Ready Model for Baby Cry Detection
- DEEPCRAFT™ Ready Model for Cough Detection
- DEEPCRAFT™ Ready Model for Direction of Arrival (Sound)
- DEEPCRAFT™ Ready Model for Factory Alarm Detection
- DEEPCRAFT™ Ready Model for Fall Detection
- DEEPCRAFT™ Ready Model for Gesture Classification
- DEEPCRAFT™ Ready Model for Siren Detection
- DEEPCRAFT™ Ready Model for Snore Detection
- DEEPCRAFT™ Studio
- DEEPCRAFT™ Voice Assistant
- Overview
- AIROC™ Wi-Fi & Bluetooth EZ-Serial Module Firmware Platform
- AIROC™ Wi-Fi & Bluetooth Linux and Android Drivers
- emWin Graphics Library and GUI for PSOC™
- Infineon Complex Device Driver for Battery Management Systems
- Memory Solutions Hub
- PSOC™ 6 Peripheral Driver Library (PDL) for PSOC™ Creator
- USB Controllers EZ-USB™ GX3 Software and Drivers
- Overview
- CAPSENSE™ Controllers Configuration Tools EZ-Click
- DC-DC Integrated POL Voltage Regulators Configuration Tool – PowIRCenter
- EZ-USB™ SX3 Configuration Utility
- FM+ Configuration Tools
- FMx Configuration Tools
- Tranceiver IC Configuration Tool
- USB EZ-PD™ Configuration Utility
- USB EZ-PD™ Dock Configuration Utility
- USB EZ-USB™ HX3C Blaster Plus Configuration Utility
- USB UART Config Utility
- XENSIV™ Tire Pressure Sensor Programming
- Overview
- EZ-PD™ CCGx Dock Software Development Kit
-
FMx Softune IDE
- Overview
- RealOS™ Real-Time Operating System
- Softune IDE Language tools
- Softune Workbench
- Tool Lineup for F2MC-16 Family SOFTUNE V3
- Tool Lineup for F2MC-8FX Family SOFTUNE V3
- Tool Lineup for FR Family SOFTUNE V6
- Virtual Starter Kit
- Windows 10 operation of released SOFTUNE product
- Windows 7 operation of released SOFTUNE product
- Windows 8 operation of released SOFTUNE product
- ModusToolbox™ Software
- PSOC™ Creator Software
- Radar Development Kit
- RUST
- USB Controllers SDK
- Wireless Connectivity Bluetooth Mesh Helper Applications
- XMC™ DAVE™ Software
- Overview
- AIROC™ Bluetooth® Connect App Archive
- Cypress™ Programmer Archive
- EZ-PD™ CCGx Power Software Development Kit Archive
- ModusToolbox™ Software Archive
- PSOC™ Creator Archive
- PSOC™ Designer Archive
- PSOC™ Programmer Archive
- USB EZ-PD™ Configuration Utility Archives
- USB EZ-PD™ Host SDK Archives
- USB EZ-USB™ FX3 Archive
- USB EZ-USB™ HX3PD Configuration Utility Archive
- WICED™ Smart SDK Archive
- WICED™ Studio Archive
- Overview
- Infineon Developer Center Launcher
- Infineon Register Viewer
- Pin and Code Wizard
- Timing Solutions
- Wireless Connectivity
- LATEST IN
- Support
- Training
- Developer Community
- News
Business & Financial Press
May 20, 2026
Business & Financial Press
May 11, 2026
Business & Financial Press
May 07, 2026
Quarterly Report
May 06, 2026
- Company
- Our stories
- Events
- Press
- Investor
- Careers
- Quality
- Latest news
Business & Financial Press
May 20, 2026
Business & Financial Press
May 11, 2026
Business & Financial Press
May 07, 2026
Quarterly Report
May 06, 2026
Are you passionate about tackling real-world supply chain challenges in the dynamic semiconductor industry?
Join us at the Infineon Supply Chain Case Challenge!
Highlights
- Stand a chance to win attractive prizes
- Champion: $3,000 SGD
- Runner-up: $2,000 SGD
- 2nd Runner-up: $1,000 SGD
- Open doors to potential internship opportunities
- Gain valuable insights into real-world semiconductor supply chain issues
What is the Infineon case challenge about?
- Gain exposure to the real-world issues revolving around Supply Chain.
- A platform to showcase your Supply Chain knowledge and hone your analytical and problem-solving skills.
What’s in it for you?
- Gain the opportunity for an engagement with Infineon’s Supply Chain experts.
- Gain exposure to the real-world issues revolving around Supply Chain.
- Possibility of securing an internship opportunity.
- Explore the intricate obstacles that arise in Supply Chain operations in the real world.
How to sign up?
- Form a team of 4 or 5 undergraduates.
- Make yourself available on the dates* stated in the Key Activities timeline.
- Appoint a team leader, fill in and submit the enrollment form by 29th May 2026.
How to get more information?
- Refer to the FAQs section to find out more.
- Contact the organizer at sc-challenge@infineon.com.
What is Infineon case challenge about?
Gain exposure to the real-world issues revolving around Supply Chain
A platform to showcase your Supply Chain knowledge and hone your analytical and problem-solving skills
Eligibility
This case challenge is open to all full-time undergraduates from any Singapore-based universities.
Teams consisting of 4 or 5 students enrolled in a full-time academic undergraduate program.
Teams can consist of members from one or more universities.
Participants must not be currently working for or worked for Infineon as an employee or contractor.
However, participants who worked for Infineon as interns in the past are welcome to join.
Other terms and conditions apply.
The Challenge
The case challenge comprises of three rounds:
The Qualifying Round, the Hackathon (including case presentation) and the Final Presentation.
The 5 teams that qualify for the Hackathon will receive notification via email by 10th July 2026.
The 3 teams that qualify for the Final Presentation will be informed at the end of the Hackathon on 19th July 2026.
Rounds
Qualifying Round – Due 3rd July 2026
- What is to be submitted?
- An executive summary of how your proposed solution addresses the case problem.
- Resources available to teams
- Detailed slide deck on case problem and relevant processes will be distributed to the teams after the virtual briefing on 1st June.
- Submission requirements:
- Write-up length: Not more than 1000 word
- Diagrams: Not more than 10 diagrams/visualizations to support your write-up
- Text format: Arial font, size 12
- File format: MS Word or PDF
- File name: “TeamName_ExecSummary”
Hackathon (including case presentation) – 17th July to 19th July 2026
Case presentation requirements:
- A presentation (not more than 20 minutes) on how your proposed solution addresses the case problem.
- An introduction to the team and their solution
- An explanation of how the solution addresses the case problem.
- A description of the proposed approach during the Hackathon.
- A 10-minute Q&A session after the presentation.
- Deliverables:
- Slide deck (PPT) of the presentation with file name: “TeamName_CasePresentation”.
Hackathon requirements:
- The hackathon will start with an introduction and anonymized business data, which will be provided on the day of the event.
- The anonymized business data might include:
- Supply chain metrics, such as shipment volumes, delivery times, and inventory levels
- Customer infomration, such as demographics, purchase history, and feedback
- Product information, such as descriptions, pricing, and sales data
- Teams will have 24 hours to develop their solutions, which can be in the form of a prototype, a proof-of-concept, or a fully functional product
- Teams are encourages to use any programming language, software, or tool they prefer.
- Mentors and judges will be available throughout the hackathon to provide guidance and support.
- Deliverables:
- Source codes, accompanying artifacts and documentation.
- Compiled binary files (if available)
- Judging Criteria: Details and breakdown of the criteria will be shared prior to the hackathon.
Grand Finale – 31st July 2026
- Each team will have 20 minutes to present their solution, followed by a 10-minute Q&A session.
- The presentation should include:
- An introduction to the team and their solution.
- A demonstration of the working prototype or functional solution.
- An explanation of how the solution addresses the case problems and utilizes the provided data.
- A description of the technical approach and tools used.
- The presentation should be engaging, clear, and concise, with visual aids such as slides, videos, or demos.
- Deliverables:
- Slide deck (PPT) of the presentation with the file name: "TeamName_Final" the day before the Grand Finale.
Frequently Asked Questions
What is the Infineon Supply Chain Case Challenge?
- The Infineon Supply Chain Case Challenge is a case challenge that aims to provide undergraduates with the opportunity to be exposed to real world supply chain problems in the semi-conductor industry.
Who can I contact for more information or assistance?
- For additional information or assistance, please feel free to reach out to us via email at: sc-challenge@infineon.com.
Is this competition open to schools outside of Singapore?
- No, this competition is not open to schools outside of Singapore.
Are graduate (masters) or post-graduate (PhD) students allowed to register?
- No, this competition is only open to undergraduates.
Are international students allowed to register?
- Yes, international students are allowed to register if they are enrolled in a full-time academic undergraduate program in Singapore.
Can I participate in the competition if I am graduating in July 2026?
- Yes, please kindly state your expected graduation date in the enrollment form.
Can I participate in the competition without any team members?
- No, each team requires 4 to 5 members.
Can students from different universities form a team together?
- Yes, the students must be from Singapore-based universities.
Is there a registration fee?
- No, there is no registration or enrollment fee. Interested students must enroll before enrollment closes.
How many students can enroll for one team?
- Participants can enroll in teams of 4 or 5 members.
What to do before enrollment?
- Participants should nominate a Team Leader and a team name. The team’s name must not indicate or suggest any educational institute.
- All participants must read and agree on the terms and conditions before submitting the enrollment form.
Which email address should be used to enroll?
- Team leaders will have to use their school email address to enroll for the case challenge.
Where to submit the deliverables for qualifying rounds?
- Submit your deliverables via email to the email address stated on the website.
What if my team missed the deadline to submit the deliverables?
- Teams who missed the deadline will be disqualified. Exceptions will be evaluated on a case-by-case basis.
Are teams allowed to resubmit/ make changes to the deliverables?
- Once the team has submitted the deliverables for each round, no changes can be made.
What is the format for submission?
- Details on submission format can be found under the “Participation and Judging Criteria” section.
Are there presentations in all rounds?
- No, only teams shortlisted for the Hackathon and Grand Finale must present.
How much time will be given for the team to present in the Hackathon and Grand Finale?
- Details on presentations can be found under the “Participation and Judging Criteria” section.
When and where will the Hackathon take place?
- 17th July (Case Presentation), 18th to 19th July (Hackathon), on-site at Infineon Technologies Asia-Pacific in Singapore.
When and where will the Grand Finale take place?
- 31st July 2026, on-site at Infineon Technologies Asia-Pacific in Singapore.
Where will the Final round take place?
- The Final round will be held in Infineon. More details will be shared closer to date.
Who can watch the final round?
- It will be a closed-door presentation. Each team will present individually to the panel of judges.
Where can I find the case challenge statement?
- It will be emailed to the team leaders.
Will there be an opportunity to speak to case owners?
- Yes, all enrolled teams have an opportunity to speak to the case owners during the virtual briefing on 2nd June. Do note that it is compulsory for at least 2 team members to be present during the briefing.
What is the role of the team leader?
- The team leader will be the main contact person. Team leaders will also receive case information and be responsible for submitting all the deliverables, on-site visits and logistics arrangements.
Is a faculty mentor needed for teams to enroll?
- No, faculty mentors are not needed for teams to enroll.
Are there any networking opportunities?
- All teams who made it to the final round will get to network after the final presentation.
What is the Infineon case challenge about?
- Gain exposure to the real-world issues revolving around Supply Chain.
- A platform to showcase your Supply Chain knowledge and hone your analytical and problem-solving skills.
What’s in it for you?
- Gain the opportunity for an engagement with Infineon’s Supply Chain experts.
- Gain exposure to the real-world issues revolving around Supply Chain.
- Possibility of securing an internship opportunity.
- Explore the intricate obstacles that arise in Supply Chain operations in the real world.
How to sign up?
- Form a team of 4 or 5 undergraduates.
- Make yourself available on the dates* stated in the Key Activities timeline.
- Appoint a team leader, fill in and submit the enrollment form by 29th May 2026.
How to get more information?
- Refer to the FAQs section to find out more.
- Contact the organizer at sc-challenge@infineon.com.
What is Infineon case challenge about?
Gain exposure to the real-world issues revolving around Supply Chain
A platform to showcase your Supply Chain knowledge and hone your analytical and problem-solving skills
Eligibility
This case challenge is open to all full-time undergraduates from any Singapore-based universities.
Teams consisting of 4 or 5 students enrolled in a full-time academic undergraduate program.
Teams can consist of members from one or more universities.
Participants must not be currently working for or worked for Infineon as an employee or contractor.
However, participants who worked for Infineon as interns in the past are welcome to join.
Other terms and conditions apply.
The Challenge
The case challenge comprises of three rounds:
The Qualifying Round, the Hackathon (including case presentation) and the Final Presentation.
The 5 teams that qualify for the Hackathon will receive notification via email by 10th July 2026.
The 3 teams that qualify for the Final Presentation will be informed at the end of the Hackathon on 19th July 2026.
Rounds
Qualifying Round – Due 3rd July 2026
- What is to be submitted?
- An executive summary of how your proposed solution addresses the case problem.
- Resources available to teams
- Detailed slide deck on case problem and relevant processes will be distributed to the teams after the virtual briefing on 1st June.
- Submission requirements:
- Write-up length: Not more than 1000 word
- Diagrams: Not more than 10 diagrams/visualizations to support your write-up
- Text format: Arial font, size 12
- File format: MS Word or PDF
- File name: “TeamName_ExecSummary”
Hackathon (including case presentation) – 17th July to 19th July 2026
Case presentation requirements:
- A presentation (not more than 20 minutes) on how your proposed solution addresses the case problem.
- An introduction to the team and their solution
- An explanation of how the solution addresses the case problem.
- A description of the proposed approach during the Hackathon.
- A 10-minute Q&A session after the presentation.
- Deliverables:
- Slide deck (PPT) of the presentation with file name: “TeamName_CasePresentation”.
Hackathon requirements:
- The hackathon will start with an introduction and anonymized business data, which will be provided on the day of the event.
- The anonymized business data might include:
- Supply chain metrics, such as shipment volumes, delivery times, and inventory levels
- Customer infomration, such as demographics, purchase history, and feedback
- Product information, such as descriptions, pricing, and sales data
- Teams will have 24 hours to develop their solutions, which can be in the form of a prototype, a proof-of-concept, or a fully functional product
- Teams are encourages to use any programming language, software, or tool they prefer.
- Mentors and judges will be available throughout the hackathon to provide guidance and support.
- Deliverables:
- Source codes, accompanying artifacts and documentation.
- Compiled binary files (if available)
- Judging Criteria: Details and breakdown of the criteria will be shared prior to the hackathon.
Grand Finale – 31st July 2026
- Each team will have 20 minutes to present their solution, followed by a 10-minute Q&A session.
- The presentation should include:
- An introduction to the team and their solution.
- A demonstration of the working prototype or functional solution.
- An explanation of how the solution addresses the case problems and utilizes the provided data.
- A description of the technical approach and tools used.
- The presentation should be engaging, clear, and concise, with visual aids such as slides, videos, or demos.
- Deliverables:
- Slide deck (PPT) of the presentation with the file name: "TeamName_Final" the day before the Grand Finale.
Frequently Asked Questions
What is the Infineon Supply Chain Case Challenge?
- The Infineon Supply Chain Case Challenge is a case challenge that aims to provide undergraduates with the opportunity to be exposed to real world supply chain problems in the semi-conductor industry.
Who can I contact for more information or assistance?
- For additional information or assistance, please feel free to reach out to us via email at: sc-challenge@infineon.com.
Is this competition open to schools outside of Singapore?
- No, this competition is not open to schools outside of Singapore.
Are graduate (masters) or post-graduate (PhD) students allowed to register?
- No, this competition is only open to undergraduates.
Are international students allowed to register?
- Yes, international students are allowed to register if they are enrolled in a full-time academic undergraduate program in Singapore.
Can I participate in the competition if I am graduating in July 2026?
- Yes, please kindly state your expected graduation date in the enrollment form.
Can I participate in the competition without any team members?
- No, each team requires 4 to 5 members.
Can students from different universities form a team together?
- Yes, the students must be from Singapore-based universities.
Is there a registration fee?
- No, there is no registration or enrollment fee. Interested students must enroll before enrollment closes.
How many students can enroll for one team?
- Participants can enroll in teams of 4 or 5 members.
What to do before enrollment?
- Participants should nominate a Team Leader and a team name. The team’s name must not indicate or suggest any educational institute.
- All participants must read and agree on the terms and conditions before submitting the enrollment form.
Which email address should be used to enroll?
- Team leaders will have to use their school email address to enroll for the case challenge.
Where to submit the deliverables for qualifying rounds?
- Submit your deliverables via email to the email address stated on the website.
What if my team missed the deadline to submit the deliverables?
- Teams who missed the deadline will be disqualified. Exceptions will be evaluated on a case-by-case basis.
Are teams allowed to resubmit/ make changes to the deliverables?
- Once the team has submitted the deliverables for each round, no changes can be made.
What is the format for submission?
- Details on submission format can be found under the “Participation and Judging Criteria” section.
Are there presentations in all rounds?
- No, only teams shortlisted for the Hackathon and Grand Finale must present.
How much time will be given for the team to present in the Hackathon and Grand Finale?
- Details on presentations can be found under the “Participation and Judging Criteria” section.
When and where will the Hackathon take place?
- 17th July (Case Presentation), 18th to 19th July (Hackathon), on-site at Infineon Technologies Asia-Pacific in Singapore.
When and where will the Grand Finale take place?
- 31st July 2026, on-site at Infineon Technologies Asia-Pacific in Singapore.
Where will the Final round take place?
- The Final round will be held in Infineon. More details will be shared closer to date.
Who can watch the final round?
- It will be a closed-door presentation. Each team will present individually to the panel of judges.
Where can I find the case challenge statement?
- It will be emailed to the team leaders.
Will there be an opportunity to speak to case owners?
- Yes, all enrolled teams have an opportunity to speak to the case owners during the virtual briefing on 2nd June. Do note that it is compulsory for at least 2 team members to be present during the briefing.
What is the role of the team leader?
- The team leader will be the main contact person. Team leaders will also receive case information and be responsible for submitting all the deliverables, on-site visits and logistics arrangements.
Is a faculty mentor needed for teams to enroll?
- No, faculty mentors are not needed for teams to enroll.
Are there any networking opportunities?
- All teams who made it to the final round will get to network after the final presentation.