Sensor2GO kits and Shield2Go
- Current sensors
- Magnetic speed sensors
- 3D magnetic sensors
- Magnetic angle sensors
- Magnetic switches
- Automotive pressure sensors with optional adapters/add on components
- Digital barometric air pressure sensor
- MEMS microphones
Infineon XENSIV™ sensor 2GO kits are plug-and-measure evaluation boards, already equipped with a sensor combined with an ARM® Cortex®-M0 CPU. All evaluation boards provide a complete set of on-board devices, including an on-board debugger. Build your own application and gadget with the sensor 2GO kits. First measurements are possible within minutes.
Learn more about our innovative XENSIV™ sensor product portfolio.
The board may be programmed using the on-board J-Link debugger based on XMC4200 microcontroller, while the target is based on a XMC1100 Q24F64 ARM® Cortex™-M0 CPU. In addition, the board features our 3D magnetic sensor, TLI493D-W2BW used as reference magnetic probe for corelating magnetic switching points with magnetic field strength. The evaluation software is offered free for download, while the user may also reprogram the board with his own application firmware by using DAVE IDE. Mechanical wise, the board is compatible with the Out-Of-Shaft Mechanical Add-on, see add ons, which shall be ordered separately.
The Infineon TLE4966 magnetic sensor 2GO kit is equipped with:
- TLE4966V-1G: double vertical Hall latch with direction detection
- TLE4966G: double lateral Hall latch with direction detection
- XMC1100 (ARM® Cortex™-M0 based)
- On-board J-Link Lite Debugger (Realized with XMC4200 Microcontroller)
- Power over USB (Micro USB), ESD and reverse current protection
- GUI for free download
The board may be programmed using the on-board J-Link debugger based on XMC4200 microcontroller, while the target is based on a XMC1100 Q24F64 ARM® Cortex™-M0 CPU. In addition, the board features our 3D magnetic sensor, TLI493D-W2BW used as reference magnetic probe for corelating magnetic switching points with magnetic field strength. The evaluation software is offered free for download, while the user may also reprogram the board with his own application firmware by using DAVE IDE. Mechanical wise, the board is compatible with the Out-Of-Shaft Mechanical Add-on, see add ons, which shall be ordered separately.
The Infineon TLE4966 magnetic sensor 2GO kit is equipped with:
- TLE4966V-1G: double vertical Hall latch with direction detection
- TLE4966G: double lateral Hall latch with direction detection
- XMC1100 (ARM® Cortex™-M0 based)
- On-board J-Link Lite Debugger (Realized with XMC4200 Microcontroller)
- Power over USB (Micro USB), ESD and reverse current protection
- GUI for free download
The board may be programmed using the on-board J-Link debugger based on XMC4200 microcontroller, while the target is based on a XMC1100 Q24F64 ARM® Cortex™-M0 CPU. In addition, the board features our 3D magnetic sensor, TLI493D-W2BW used as reference magnetic probe for corelating magnetic switching points with magnetic field strength. The evaluation software is offered free for download, while the user may also reprogram the board with his own application firmware by using DAVE IDE. Mechanical wise, the board is compatible with the Out-Of-Shaft Mechanical Add-on, see add ons, which shall be ordered separately.
The Infineon TLE4966 magnetic sensor 2GO kit is equipped with:
- TLE4966V-1G: double vertical Hall latch with direction detection
- TLE4966G: double lateral Hall latch with direction detection
- XMC1100 (ARM® Cortex™-M0 based)
- On-board J-Link Lite Debugger (Realized with XMC4200 Microcontroller)
- Power over USB (Micro USB), ESD and reverse current protection
- GUI for free download
Infineon´s XENSIV™ TLx5012B magnetic angle sensor 2GO kit is a budget-priced entry level evaluation kit equipped with a TLE5012B /TLI5012B digital GMR angle sensor interfaced with an XMC1100 Infineon Microcontroller based on ARM Cortex M0 CPU. Build your own application and gadget with the Angle Sensor 2GO kits. The hardware & software bundle allows decoding and acquisition of all communication protocols, access to RAM registers and soft fusing of different variants.
The sensor is assembled in four different variants:
- TLE5012B E1000 version: automotive predefined variant with SSC & IIF communication protocols
- TLE5012B E5000 version: automotive predefined variant with SSC & PWM communication protocols
- TLE5012B E9000 version: automotive predefined variant with SSC & SPC communication protocols
- TLI5012B E1000 version: industrial predefined variant with SSC & IIF communication protocols
- XMC1100 (ARM® Cortex™-M0 based)
- On-board J-Link Lite Debugger (Realized with XMC4200 Microcontroller)
- Power over USB (Micro USB), ESD and reverse current protection
- GUI for free download
Infineon´s XENSIV™ TLx5012B magnetic angle sensor 2GO kit is a budget-priced entry level evaluation kit equipped with a TLE5012B /TLI5012B digital GMR angle sensor interfaced with an XMC1100 Infineon Microcontroller based on ARM Cortex M0 CPU. Build your own application and gadget with the Angle Sensor 2GO kits. The hardware & software bundle allows decoding and acquisition of all communication protocols, access to RAM registers and soft fusing of different variants.
The sensor is assembled in four different variants:
- TLE5012B E1000 version: automotive predefined variant with SSC & IIF communication protocols
- TLE5012B E5000 version: automotive predefined variant with SSC & PWM communication protocols
- TLE5012B E9000 version: automotive predefined variant with SSC & SPC communication protocols
- TLI5012B E1000 version: industrial predefined variant with SSC & IIF communication protocols
- XMC1100 (ARM® Cortex™-M0 based)
- On-board J-Link Lite Debugger (Realized with XMC4200 Microcontroller)
- Power over USB (Micro USB), ESD and reverse current protection
- GUI for free download
Infineon´s XENSIV™ TLx5012B magnetic angle sensor 2GO kit is a budget-priced entry level evaluation kit equipped with a TLE5012B /TLI5012B digital GMR angle sensor interfaced with an XMC1100 Infineon Microcontroller based on ARM Cortex M0 CPU. Build your own application and gadget with the Angle Sensor 2GO kits. The hardware & software bundle allows decoding and acquisition of all communication protocols, access to RAM registers and soft fusing of different variants.
The sensor is assembled in four different variants:
- TLE5012B E1000 version: automotive predefined variant with SSC & IIF communication protocols
- TLE5012B E5000 version: automotive predefined variant with SSC & PWM communication protocols
- TLE5012B E9000 version: automotive predefined variant with SSC & SPC communication protocols
- TLI5012B E1000 version: industrial predefined variant with SSC & IIF communication protocols
- XMC1100 (ARM® Cortex™-M0 based)
- On-board J-Link Lite Debugger (Realized with XMC4200 Microcontroller)
- Power over USB (Micro USB), ESD and reverse current protection
- GUI for free download
The 3D Magnetic Sensor 2GO kit is a budget-priced evaluation board equipped with a magnetic sensor for three dimensional measurement combined with an ARM® Cortex™-M0 CPU. It has a complete set of on-board devices, including an on-board debugger. In addition Infineon is offering so called add-on components which are adapters for the 3D Magnetic Sensor 2GO kits. Theses add ons (e.g. joysticks, rotation knobs, linear slider etc.) comprise a magnet and can be directly mounted onto the 2GO kits. Together with a dedicated GUI it’s the perfect tool for fast and easy plug-and-play systems. Build and evaluate your own application and gadget with the 3D Magnetic Sensor 2GO kit.
We offer three different derivatives, overview on derivatives:
- TLE493D-A2B6: automotive predefined variant, this variant is discontinued, please refer to TLE493D-W2B6 MS2GO
- TLE493D-W2B6: automotive predefined variant with wake up functionality (supports up to ASIL B)
- TLV493D-A1B6: consumer predefined variant
- XMC1100 (ARM® Cortex™-M0 based)
- On-board J-Link Lite Debugger (Realized with XMC4200 Microcontroller)
- Power over USB (Micro USB), ESD and reverse current protection
- GUI for free download
- Overview on product and nomenclature
The 3D Magnetic Sensor 2GO kit is a budget-priced evaluation board equipped with a magnetic sensor for three dimensional measurement combined with an ARM® Cortex™-M0 CPU. It has a complete set of on-board devices, including an on-board debugger. In addition Infineon is offering so called add-on components which are adapters for the 3D Magnetic Sensor 2GO kits. Theses add ons (e.g. joysticks, rotation knobs, linear slider etc.) comprise a magnet and can be directly mounted onto the 2GO kits. Together with a dedicated GUI it’s the perfect tool for fast and easy plug-and-play systems. Build and evaluate your own application and gadget with the 3D Magnetic Sensor 2GO kit.
We offer three different derivatives, overview on derivatives:
- TLE493D-A2B6: automotive predefined variant, this variant is discontinued, please refer to TLE493D-W2B6 MS2GO
- TLE493D-W2B6: automotive predefined variant with wake up functionality (supports up to ASIL B)
- TLV493D-A1B6: consumer predefined variant
- XMC1100 (ARM® Cortex™-M0 based)
- On-board J-Link Lite Debugger (Realized with XMC4200 Microcontroller)
- Power over USB (Micro USB), ESD and reverse current protection
- GUI for free download
- Overview on product and nomenclature
The 3D Magnetic Sensor 2GO kit is a budget-priced evaluation board equipped with a magnetic sensor for three dimensional measurement combined with an ARM® Cortex™-M0 CPU. It has a complete set of on-board devices, including an on-board debugger. In addition Infineon is offering so called add-on components which are adapters for the 3D Magnetic Sensor 2GO kits. Theses add ons (e.g. joysticks, rotation knobs, linear slider etc.) comprise a magnet and can be directly mounted onto the 2GO kits. Together with a dedicated GUI it’s the perfect tool for fast and easy plug-and-play systems. Build and evaluate your own application and gadget with the 3D Magnetic Sensor 2GO kit.
We offer three different derivatives, overview on derivatives:
- TLE493D-A2B6: automotive predefined variant, this variant is discontinued, please refer to TLE493D-W2B6 MS2GO
- TLE493D-W2B6: automotive predefined variant with wake up functionality (supports up to ASIL B)
- TLV493D-A1B6: consumer predefined variant
- XMC1100 (ARM® Cortex™-M0 based)
- On-board J-Link Lite Debugger (Realized with XMC4200 Microcontroller)
- Power over USB (Micro USB), ESD and reverse current protection
- GUI for free download
- Overview on product and nomenclature
TLI4971 S2GO (Shield2Go) version consists of 3 main building blocks: -Sensor board (top): Incorporating the TLI4971 industrial current sensor (equipped with M4 screw connectors for high current capabilities < 20A) -Adapter board (Shield2Go format): The adapter board comes in the Shield2Go pinout and can be connected to the sensor board via the PCB edge connectors. It implements sensor application circuit & peripherals as well as pinout to the Infineon XMC 2Go (link to XMC 2Go ) MCU platform. -Ziplock bag with: 2xM4 screws, 1 PCB edge connector (for connecting the sensor board to the adapter board in the Shield2Go formfactor), pin headers (male & female)
For evaluation purposes of the latest XENSIV™ current sensor TLI4971 we rely on our proven evaluation concept of Shield2Go and 2GO kits – therefore the TLI4971 evaluation environment is also offered in those two configurations:
- TLI4971 MS2GO: 2GO Kit version
Two typical configurations for the TLI4971 Shield2Go version - offering full flexibility:
- Shield2Go configuration: Connecting the sensor board to the adapter board with PCB edge connectors. The pinout corresponds to the Infineon XMC 2Go MCU platform. Please note that the XMC 2Go is not provided in the package. The programming can be done in the Arduino IDE by selecting the XMC 2Go platform.
- Standalone sensor board: The sensor board (top) can also be used as a standalone in any customer application (e.g. interfaced with customer MCU platforms, interfaced with lab equipment etc).
The TLI4971 S2GO does not offer programmability features, but all programming features can be explored by RAM settings.
TLI4971 S2GO (Shield2Go) version consists of 3 main building blocks: -Sensor board (top): Incorporating the TLI4971 industrial current sensor (equipped with M4 screw connectors for high current capabilities < 20A) -Adapter board (Shield2Go format): The adapter board comes in the Shield2Go pinout and can be connected to the sensor board via the PCB edge connectors. It implements sensor application circuit & peripherals as well as pinout to the Infineon XMC 2Go (link to XMC 2Go ) MCU platform. -Ziplock bag with: 2xM4 screws, 1 PCB edge connector (for connecting the sensor board to the adapter board in the Shield2Go formfactor), pin headers (male & female)
For evaluation purposes of the latest XENSIV™ current sensor TLI4971 we rely on our proven evaluation concept of Shield2Go and 2GO kits – therefore the TLI4971 evaluation environment is also offered in those two configurations:
- TLI4971 MS2GO: 2GO Kit version
Two typical configurations for the TLI4971 Shield2Go version - offering full flexibility:
- Shield2Go configuration: Connecting the sensor board to the adapter board with PCB edge connectors. The pinout corresponds to the Infineon XMC 2Go MCU platform. Please note that the XMC 2Go is not provided in the package. The programming can be done in the Arduino IDE by selecting the XMC 2Go platform.
- Standalone sensor board: The sensor board (top) can also be used as a standalone in any customer application (e.g. interfaced with customer MCU platforms, interfaced with lab equipment etc).
The TLI4971 S2GO does not offer programmability features, but all programming features can be explored by RAM settings.
TLI4971 S2GO (Shield2Go) version consists of 3 main building blocks: -Sensor board (top): Incorporating the TLI4971 industrial current sensor (equipped with M4 screw connectors for high current capabilities < 20A) -Adapter board (Shield2Go format): The adapter board comes in the Shield2Go pinout and can be connected to the sensor board via the PCB edge connectors. It implements sensor application circuit & peripherals as well as pinout to the Infineon XMC 2Go (link to XMC 2Go ) MCU platform. -Ziplock bag with: 2xM4 screws, 1 PCB edge connector (for connecting the sensor board to the adapter board in the Shield2Go formfactor), pin headers (male & female)
For evaluation purposes of the latest XENSIV™ current sensor TLI4971 we rely on our proven evaluation concept of Shield2Go and 2GO kits – therefore the TLI4971 evaluation environment is also offered in those two configurations:
- TLI4971 MS2GO: 2GO Kit version
Two typical configurations for the TLI4971 Shield2Go version - offering full flexibility:
- Shield2Go configuration: Connecting the sensor board to the adapter board with PCB edge connectors. The pinout corresponds to the Infineon XMC 2Go MCU platform. Please note that the XMC 2Go is not provided in the package. The programming can be done in the Arduino IDE by selecting the XMC 2Go platform.
- Standalone sensor board: The sensor board (top) can also be used as a standalone in any customer application (e.g. interfaced with customer MCU platforms, interfaced with lab equipment etc).
The TLI4971 S2GO does not offer programmability features, but all programming features can be explored by RAM settings.
TLI4971 S2GO (Shield2Go) version consists of 3 main building blocks: -Sensor board (top): Incorporating the TLI4971 industrial current sensor (equipped with M4 screw connectors for high current capabilities < 20A) -Adapter board (Shield2Go format): The adapter board comes in the Shield2Go pinout and can be connected to the sensor board via the PCB edge connectors. It implements sensor application circuit & peripherals as well as pinout to the Infineon XMC 2Go (link to XMC 2Go ) MCU platform. -Ziplock bag with: 2xM4 screws, 1 PCB edge connector (for connecting the sensor board to the adapter board in the Shield2Go formfactor), pin headers (male & female)
Our Infineon KP2xx automotive pressure 2GO kit is a budget-priced evaluation kit enabling the possibility to evaluate several derivatives of the Infineon KP2xx pressure sensor:
- KP215F1701 MAP: Analog Manifold Air Pressure Sensor
- KP229E3518 TurboMAP: Analog Turbo Manifold Air Pressure Sensor
- KP236 BAP: Analog Barometric Air Pressure
- KP254 dBAP: Digital Barometric Air Pressure (SPI)
The KP215, KP229 and KP236 variants provide an analog interface, the KP254 provides SPI and the KP275 provides SENT digital communication interface.
- Pressure and external temperature measurement - ONLY KP275dMAP
- CSV file can be generated for each derivative
- External NTC included, KP275-PS2GO-KIT
- Configuration of different transfer functions possible, KP215F1701-PS2GO-KIT and KP229E3518-PS2GO-KIT
- A pressure connector consisting of fast connector for 6mm tubes, pressure couple and sealing is included
- GUI software for free download
TLI4971 S2GO (Shield2Go) version consists of 3 main building blocks: -Sensor board (top): Incorporating the TLI4971 industrial current sensor (equipped with M4 screw connectors for high current capabilities < 20A) -Adapter board (Shield2Go format): The adapter board comes in the Shield2Go pinout and can be connected to the sensor board via the PCB edge connectors. It implements sensor application circuit & peripherals as well as pinout to the Infineon XMC 2Go (link to XMC 2Go ) MCU platform. -Ziplock bag with: 2xM4 screws, 1 PCB edge connector (for connecting the sensor board to the adapter board in the Shield2Go formfactor), pin headers (male & female)
Our Infineon KP2xx automotive pressure 2GO kit is a budget-priced evaluation kit enabling the possibility to evaluate several derivatives of the Infineon KP2xx pressure sensor:
- KP215F1701 MAP: Analog Manifold Air Pressure Sensor
- KP229E3518 TurboMAP: Analog Turbo Manifold Air Pressure Sensor
- KP236 BAP: Analog Barometric Air Pressure
- KP254 dBAP: Digital Barometric Air Pressure (SPI)
The KP215, KP229 and KP236 variants provide an analog interface, the KP254 provides SPI and the KP275 provides SENT digital communication interface.
- Pressure and external temperature measurement - ONLY KP275dMAP
- CSV file can be generated for each derivative
- External NTC included, KP275-PS2GO-KIT
- Configuration of different transfer functions possible, KP215F1701-PS2GO-KIT and KP229E3518-PS2GO-KIT
- A pressure connector consisting of fast connector for 6mm tubes, pressure couple and sealing is included
- GUI software for free download
TLI4971 S2GO (Shield2Go) version consists of 3 main building blocks: -Sensor board (top): Incorporating the TLI4971 industrial current sensor (equipped with M4 screw connectors for high current capabilities < 20A) -Adapter board (Shield2Go format): The adapter board comes in the Shield2Go pinout and can be connected to the sensor board via the PCB edge connectors. It implements sensor application circuit & peripherals as well as pinout to the Infineon XMC 2Go (link to XMC 2Go ) MCU platform. -Ziplock bag with: 2xM4 screws, 1 PCB edge connector (for connecting the sensor board to the adapter board in the Shield2Go formfactor), pin headers (male & female)
Our Infineon KP2xx automotive pressure 2GO kit is a budget-priced evaluation kit enabling the possibility to evaluate several derivatives of the Infineon KP2xx pressure sensor:
- KP215F1701 MAP: Analog Manifold Air Pressure Sensor
- KP229E3518 TurboMAP: Analog Turbo Manifold Air Pressure Sensor
- KP236 BAP: Analog Barometric Air Pressure
- KP254 dBAP: Digital Barometric Air Pressure (SPI)
The KP215, KP229 and KP236 variants provide an analog interface, the KP254 provides SPI and the KP275 provides SENT digital communication interface.
- Pressure and external temperature measurement - ONLY KP275dMAP
- CSV file can be generated for each derivative
- External NTC included, KP275-PS2GO-KIT
- Configuration of different transfer functions possible, KP215F1701-PS2GO-KIT and KP229E3518-PS2GO-KIT
- A pressure connector consisting of fast connector for 6mm tubes, pressure couple and sealing is included
- GUI software for free download
Infineon’s sensor 2GO kits are new budget-priced evaluation boards that are already equipped with a sensor combined with an ARM® Cortex®-M0 CPU. The sensor 2GO kits provide a complete set of on-board devices, including an on-board debugger. Build your own application and gadget with the sensor 2GO kits. Our 2GO kits are ready-to-use plug-and-play boards.
- Budget-priced evaluation board for speed sensing
- Complete speed sensor incl. back-bias magnet, fixing and cable
- TLE4922 (active mono cell Hall sensor)
- XMC1100 (ARM® Cortex™-M0 based)
- On-board J-Link Lite Debugger (Realized with XMC4200 microcontroller)
- Power over USB (Micro USB), ESD and reverse current protection
- GUI based tool for real in-application evaluation for free download
Infineon’s sensor 2GO kits are new budget-priced evaluation boards that are already equipped with a sensor combined with an ARM® Cortex®-M0 CPU. The sensor 2GO kits provide a complete set of on-board devices, including an on-board debugger. Build your own application and gadget with the sensor 2GO kits. Our 2GO kits are ready-to-use plug-and-play boards.
- Budget-priced evaluation board for speed sensing
- Complete speed sensor incl. back-bias magnet, fixing and cable
- TLE4922 (active mono cell Hall sensor)
- XMC1100 (ARM® Cortex™-M0 based)
- On-board J-Link Lite Debugger (Realized with XMC4200 microcontroller)
- Power over USB (Micro USB), ESD and reverse current protection
- GUI based tool for real in-application evaluation for free download
Infineon’s sensor 2GO kits are new budget-priced evaluation boards that are already equipped with a sensor combined with an ARM® Cortex®-M0 CPU. The sensor 2GO kits provide a complete set of on-board devices, including an on-board debugger. Build your own application and gadget with the sensor 2GO kits. Our 2GO kits are ready-to-use plug-and-play boards.
- Budget-priced evaluation board for speed sensing
- Complete speed sensor incl. back-bias magnet, fixing and cable
- TLE4922 (active mono cell Hall sensor)
- XMC1100 (ARM® Cortex™-M0 based)
- On-board J-Link Lite Debugger (Realized with XMC4200 microcontroller)
- Power over USB (Micro USB), ESD and reverse current protection
- GUI based tool for real in-application evaluation for free download
The board may be programmed using the on-board J-Link debugger based on XMC4200 microcontroller, while the target is based on a XMC1100 Q24F64 ARM® Cortex™-M0 CPU. In addition, the board features our 3D magnetic sensor, TLI493D-W2BW used as reference magnetic probe for corelating magnetic switching points with magnetic field strength. The evaluation software is offered free for download, while the user may also reprogram the board with his own application firmware by using DAVE IDE. Mechanical wise, the board is compatible with the Out-Of-Shaft Mechanical Add-on, see add ons, which shall be ordered separately.
The Infineon TLE4966 magnetic sensor 2GO kit is equipped with:
- TLE4966V-1G: double vertical Hall latch with direction detection
- TLE4966G: double lateral Hall latch with direction detection
- XMC1100 (ARM® Cortex™-M0 based)
- On-board J-Link Lite Debugger (Realized with XMC4200 Microcontroller)
- Power over USB (Micro USB), ESD and reverse current protection
- GUI for free download
The board may be programmed using the on-board J-Link debugger based on XMC4200 microcontroller, while the target is based on a XMC1100 Q24F64 ARM® Cortex™-M0 CPU. In addition, the board features our 3D magnetic sensor, TLI493D-W2BW used as reference magnetic probe for corelating magnetic switching points with magnetic field strength. The evaluation software is offered free for download, while the user may also reprogram the board with his own application firmware by using DAVE IDE. Mechanical wise, the board is compatible with the Out-Of-Shaft Mechanical Add-on, see add ons, which shall be ordered separately.
The Infineon TLE4966 magnetic sensor 2GO kit is equipped with:
- TLE4966V-1G: double vertical Hall latch with direction detection
- TLE4966G: double lateral Hall latch with direction detection
- XMC1100 (ARM® Cortex™-M0 based)
- On-board J-Link Lite Debugger (Realized with XMC4200 Microcontroller)
- Power over USB (Micro USB), ESD and reverse current protection
- GUI for free download
The board may be programmed using the on-board J-Link debugger based on XMC4200 microcontroller, while the target is based on a XMC1100 Q24F64 ARM® Cortex™-M0 CPU. In addition, the board features our 3D magnetic sensor, TLI493D-W2BW used as reference magnetic probe for corelating magnetic switching points with magnetic field strength. The evaluation software is offered free for download, while the user may also reprogram the board with his own application firmware by using DAVE IDE. Mechanical wise, the board is compatible with the Out-Of-Shaft Mechanical Add-on, see add ons, which shall be ordered separately.
The Infineon TLE4966 magnetic sensor 2GO kit is equipped with:
- TLE4966V-1G: double vertical Hall latch with direction detection
- TLE4966G: double lateral Hall latch with direction detection
- XMC1100 (ARM® Cortex™-M0 based)
- On-board J-Link Lite Debugger (Realized with XMC4200 Microcontroller)
- Power over USB (Micro USB), ESD and reverse current protection
- GUI for free download
Infineon´s XENSIV™ TLx5012B magnetic angle sensor 2GO kit is a budget-priced entry level evaluation kit equipped with a TLE5012B /TLI5012B digital GMR angle sensor interfaced with an XMC1100 Infineon Microcontroller based on ARM Cortex M0 CPU. Build your own application and gadget with the Angle Sensor 2GO kits. The hardware & software bundle allows decoding and acquisition of all communication protocols, access to RAM registers and soft fusing of different variants.
The sensor is assembled in four different variants:
- TLE5012B E1000 version: automotive predefined variant with SSC & IIF communication protocols
- TLE5012B E5000 version: automotive predefined variant with SSC & PWM communication protocols
- TLE5012B E9000 version: automotive predefined variant with SSC & SPC communication protocols
- TLI5012B E1000 version: industrial predefined variant with SSC & IIF communication protocols
- XMC1100 (ARM® Cortex™-M0 based)
- On-board J-Link Lite Debugger (Realized with XMC4200 Microcontroller)
- Power over USB (Micro USB), ESD and reverse current protection
- GUI for free download
Infineon´s XENSIV™ TLx5012B magnetic angle sensor 2GO kit is a budget-priced entry level evaluation kit equipped with a TLE5012B /TLI5012B digital GMR angle sensor interfaced with an XMC1100 Infineon Microcontroller based on ARM Cortex M0 CPU. Build your own application and gadget with the Angle Sensor 2GO kits. The hardware & software bundle allows decoding and acquisition of all communication protocols, access to RAM registers and soft fusing of different variants.
The sensor is assembled in four different variants:
- TLE5012B E1000 version: automotive predefined variant with SSC & IIF communication protocols
- TLE5012B E5000 version: automotive predefined variant with SSC & PWM communication protocols
- TLE5012B E9000 version: automotive predefined variant with SSC & SPC communication protocols
- TLI5012B E1000 version: industrial predefined variant with SSC & IIF communication protocols
- XMC1100 (ARM® Cortex™-M0 based)
- On-board J-Link Lite Debugger (Realized with XMC4200 Microcontroller)
- Power over USB (Micro USB), ESD and reverse current protection
- GUI for free download
Infineon´s XENSIV™ TLx5012B magnetic angle sensor 2GO kit is a budget-priced entry level evaluation kit equipped with a TLE5012B /TLI5012B digital GMR angle sensor interfaced with an XMC1100 Infineon Microcontroller based on ARM Cortex M0 CPU. Build your own application and gadget with the Angle Sensor 2GO kits. The hardware & software bundle allows decoding and acquisition of all communication protocols, access to RAM registers and soft fusing of different variants.
The sensor is assembled in four different variants:
- TLE5012B E1000 version: automotive predefined variant with SSC & IIF communication protocols
- TLE5012B E5000 version: automotive predefined variant with SSC & PWM communication protocols
- TLE5012B E9000 version: automotive predefined variant with SSC & SPC communication protocols
- TLI5012B E1000 version: industrial predefined variant with SSC & IIF communication protocols
- XMC1100 (ARM® Cortex™-M0 based)
- On-board J-Link Lite Debugger (Realized with XMC4200 Microcontroller)
- Power over USB (Micro USB), ESD and reverse current protection
- GUI for free download
The 3D Magnetic Sensor 2GO kit is a budget-priced evaluation board equipped with a magnetic sensor for three dimensional measurement combined with an ARM® Cortex™-M0 CPU. It has a complete set of on-board devices, including an on-board debugger. In addition Infineon is offering so called add-on components which are adapters for the 3D Magnetic Sensor 2GO kits. Theses add ons (e.g. joysticks, rotation knobs, linear slider etc.) comprise a magnet and can be directly mounted onto the 2GO kits. Together with a dedicated GUI it’s the perfect tool for fast and easy plug-and-play systems. Build and evaluate your own application and gadget with the 3D Magnetic Sensor 2GO kit.
We offer three different derivatives, overview on derivatives:
- TLE493D-A2B6: automotive predefined variant, this variant is discontinued, please refer to TLE493D-W2B6 MS2GO
- TLE493D-W2B6: automotive predefined variant with wake up functionality (supports up to ASIL B)
- TLV493D-A1B6: consumer predefined variant
- XMC1100 (ARM® Cortex™-M0 based)
- On-board J-Link Lite Debugger (Realized with XMC4200 Microcontroller)
- Power over USB (Micro USB), ESD and reverse current protection
- GUI for free download
- Overview on product and nomenclature
The 3D Magnetic Sensor 2GO kit is a budget-priced evaluation board equipped with a magnetic sensor for three dimensional measurement combined with an ARM® Cortex™-M0 CPU. It has a complete set of on-board devices, including an on-board debugger. In addition Infineon is offering so called add-on components which are adapters for the 3D Magnetic Sensor 2GO kits. Theses add ons (e.g. joysticks, rotation knobs, linear slider etc.) comprise a magnet and can be directly mounted onto the 2GO kits. Together with a dedicated GUI it’s the perfect tool for fast and easy plug-and-play systems. Build and evaluate your own application and gadget with the 3D Magnetic Sensor 2GO kit.
We offer three different derivatives, overview on derivatives:
- TLE493D-A2B6: automotive predefined variant, this variant is discontinued, please refer to TLE493D-W2B6 MS2GO
- TLE493D-W2B6: automotive predefined variant with wake up functionality (supports up to ASIL B)
- TLV493D-A1B6: consumer predefined variant
- XMC1100 (ARM® Cortex™-M0 based)
- On-board J-Link Lite Debugger (Realized with XMC4200 Microcontroller)
- Power over USB (Micro USB), ESD and reverse current protection
- GUI for free download
- Overview on product and nomenclature
The 3D Magnetic Sensor 2GO kit is a budget-priced evaluation board equipped with a magnetic sensor for three dimensional measurement combined with an ARM® Cortex™-M0 CPU. It has a complete set of on-board devices, including an on-board debugger. In addition Infineon is offering so called add-on components which are adapters for the 3D Magnetic Sensor 2GO kits. Theses add ons (e.g. joysticks, rotation knobs, linear slider etc.) comprise a magnet and can be directly mounted onto the 2GO kits. Together with a dedicated GUI it’s the perfect tool for fast and easy plug-and-play systems. Build and evaluate your own application and gadget with the 3D Magnetic Sensor 2GO kit.
We offer three different derivatives, overview on derivatives:
- TLE493D-A2B6: automotive predefined variant, this variant is discontinued, please refer to TLE493D-W2B6 MS2GO
- TLE493D-W2B6: automotive predefined variant with wake up functionality (supports up to ASIL B)
- TLV493D-A1B6: consumer predefined variant
- XMC1100 (ARM® Cortex™-M0 based)
- On-board J-Link Lite Debugger (Realized with XMC4200 Microcontroller)
- Power over USB (Micro USB), ESD and reverse current protection
- GUI for free download
- Overview on product and nomenclature
TLI4971 S2GO (Shield2Go) version consists of 3 main building blocks: -Sensor board (top): Incorporating the TLI4971 industrial current sensor (equipped with M4 screw connectors for high current capabilities < 20A) -Adapter board (Shield2Go format): The adapter board comes in the Shield2Go pinout and can be connected to the sensor board via the PCB edge connectors. It implements sensor application circuit & peripherals as well as pinout to the Infineon XMC 2Go (link to XMC 2Go ) MCU platform. -Ziplock bag with: 2xM4 screws, 1 PCB edge connector (for connecting the sensor board to the adapter board in the Shield2Go formfactor), pin headers (male & female)
For evaluation purposes of the latest XENSIV™ current sensor TLI4971 we rely on our proven evaluation concept of Shield2Go and 2GO kits – therefore the TLI4971 evaluation environment is also offered in those two configurations:
- TLI4971 MS2GO: 2GO Kit version
Two typical configurations for the TLI4971 Shield2Go version - offering full flexibility:
- Shield2Go configuration: Connecting the sensor board to the adapter board with PCB edge connectors. The pinout corresponds to the Infineon XMC 2Go MCU platform. Please note that the XMC 2Go is not provided in the package. The programming can be done in the Arduino IDE by selecting the XMC 2Go platform.
- Standalone sensor board: The sensor board (top) can also be used as a standalone in any customer application (e.g. interfaced with customer MCU platforms, interfaced with lab equipment etc).
The TLI4971 S2GO does not offer programmability features, but all programming features can be explored by RAM settings.
TLI4971 S2GO (Shield2Go) version consists of 3 main building blocks: -Sensor board (top): Incorporating the TLI4971 industrial current sensor (equipped with M4 screw connectors for high current capabilities < 20A) -Adapter board (Shield2Go format): The adapter board comes in the Shield2Go pinout and can be connected to the sensor board via the PCB edge connectors. It implements sensor application circuit & peripherals as well as pinout to the Infineon XMC 2Go (link to XMC 2Go ) MCU platform. -Ziplock bag with: 2xM4 screws, 1 PCB edge connector (for connecting the sensor board to the adapter board in the Shield2Go formfactor), pin headers (male & female)
For evaluation purposes of the latest XENSIV™ current sensor TLI4971 we rely on our proven evaluation concept of Shield2Go and 2GO kits – therefore the TLI4971 evaluation environment is also offered in those two configurations:
- TLI4971 MS2GO: 2GO Kit version
Two typical configurations for the TLI4971 Shield2Go version - offering full flexibility:
- Shield2Go configuration: Connecting the sensor board to the adapter board with PCB edge connectors. The pinout corresponds to the Infineon XMC 2Go MCU platform. Please note that the XMC 2Go is not provided in the package. The programming can be done in the Arduino IDE by selecting the XMC 2Go platform.
- Standalone sensor board: The sensor board (top) can also be used as a standalone in any customer application (e.g. interfaced with customer MCU platforms, interfaced with lab equipment etc).
The TLI4971 S2GO does not offer programmability features, but all programming features can be explored by RAM settings.
TLI4971 S2GO (Shield2Go) version consists of 3 main building blocks: -Sensor board (top): Incorporating the TLI4971 industrial current sensor (equipped with M4 screw connectors for high current capabilities < 20A) -Adapter board (Shield2Go format): The adapter board comes in the Shield2Go pinout and can be connected to the sensor board via the PCB edge connectors. It implements sensor application circuit & peripherals as well as pinout to the Infineon XMC 2Go (link to XMC 2Go ) MCU platform. -Ziplock bag with: 2xM4 screws, 1 PCB edge connector (for connecting the sensor board to the adapter board in the Shield2Go formfactor), pin headers (male & female)
For evaluation purposes of the latest XENSIV™ current sensor TLI4971 we rely on our proven evaluation concept of Shield2Go and 2GO kits – therefore the TLI4971 evaluation environment is also offered in those two configurations:
- TLI4971 MS2GO: 2GO Kit version
Two typical configurations for the TLI4971 Shield2Go version - offering full flexibility:
- Shield2Go configuration: Connecting the sensor board to the adapter board with PCB edge connectors. The pinout corresponds to the Infineon XMC 2Go MCU platform. Please note that the XMC 2Go is not provided in the package. The programming can be done in the Arduino IDE by selecting the XMC 2Go platform.
- Standalone sensor board: The sensor board (top) can also be used as a standalone in any customer application (e.g. interfaced with customer MCU platforms, interfaced with lab equipment etc).
The TLI4971 S2GO does not offer programmability features, but all programming features can be explored by RAM settings.
TLI4971 S2GO (Shield2Go) version consists of 3 main building blocks: -Sensor board (top): Incorporating the TLI4971 industrial current sensor (equipped with M4 screw connectors for high current capabilities < 20A) -Adapter board (Shield2Go format): The adapter board comes in the Shield2Go pinout and can be connected to the sensor board via the PCB edge connectors. It implements sensor application circuit & peripherals as well as pinout to the Infineon XMC 2Go (link to XMC 2Go ) MCU platform. -Ziplock bag with: 2xM4 screws, 1 PCB edge connector (for connecting the sensor board to the adapter board in the Shield2Go formfactor), pin headers (male & female)
Our Infineon KP2xx automotive pressure 2GO kit is a budget-priced evaluation kit enabling the possibility to evaluate several derivatives of the Infineon KP2xx pressure sensor:
- KP215F1701 MAP: Analog Manifold Air Pressure Sensor
- KP229E3518 TurboMAP: Analog Turbo Manifold Air Pressure Sensor
- KP236 BAP: Analog Barometric Air Pressure
- KP254 dBAP: Digital Barometric Air Pressure (SPI)
The KP215, KP229 and KP236 variants provide an analog interface, the KP254 provides SPI and the KP275 provides SENT digital communication interface.
- Pressure and external temperature measurement - ONLY KP275dMAP
- CSV file can be generated for each derivative
- External NTC included, KP275-PS2GO-KIT
- Configuration of different transfer functions possible, KP215F1701-PS2GO-KIT and KP229E3518-PS2GO-KIT
- A pressure connector consisting of fast connector for 6mm tubes, pressure couple and sealing is included
- GUI software for free download
TLI4971 S2GO (Shield2Go) version consists of 3 main building blocks: -Sensor board (top): Incorporating the TLI4971 industrial current sensor (equipped with M4 screw connectors for high current capabilities < 20A) -Adapter board (Shield2Go format): The adapter board comes in the Shield2Go pinout and can be connected to the sensor board via the PCB edge connectors. It implements sensor application circuit & peripherals as well as pinout to the Infineon XMC 2Go (link to XMC 2Go ) MCU platform. -Ziplock bag with: 2xM4 screws, 1 PCB edge connector (for connecting the sensor board to the adapter board in the Shield2Go formfactor), pin headers (male & female)
Our Infineon KP2xx automotive pressure 2GO kit is a budget-priced evaluation kit enabling the possibility to evaluate several derivatives of the Infineon KP2xx pressure sensor:
- KP215F1701 MAP: Analog Manifold Air Pressure Sensor
- KP229E3518 TurboMAP: Analog Turbo Manifold Air Pressure Sensor
- KP236 BAP: Analog Barometric Air Pressure
- KP254 dBAP: Digital Barometric Air Pressure (SPI)
The KP215, KP229 and KP236 variants provide an analog interface, the KP254 provides SPI and the KP275 provides SENT digital communication interface.
- Pressure and external temperature measurement - ONLY KP275dMAP
- CSV file can be generated for each derivative
- External NTC included, KP275-PS2GO-KIT
- Configuration of different transfer functions possible, KP215F1701-PS2GO-KIT and KP229E3518-PS2GO-KIT
- A pressure connector consisting of fast connector for 6mm tubes, pressure couple and sealing is included
- GUI software for free download
TLI4971 S2GO (Shield2Go) version consists of 3 main building blocks: -Sensor board (top): Incorporating the TLI4971 industrial current sensor (equipped with M4 screw connectors for high current capabilities < 20A) -Adapter board (Shield2Go format): The adapter board comes in the Shield2Go pinout and can be connected to the sensor board via the PCB edge connectors. It implements sensor application circuit & peripherals as well as pinout to the Infineon XMC 2Go (link to XMC 2Go ) MCU platform. -Ziplock bag with: 2xM4 screws, 1 PCB edge connector (for connecting the sensor board to the adapter board in the Shield2Go formfactor), pin headers (male & female)
Our Infineon KP2xx automotive pressure 2GO kit is a budget-priced evaluation kit enabling the possibility to evaluate several derivatives of the Infineon KP2xx pressure sensor:
- KP215F1701 MAP: Analog Manifold Air Pressure Sensor
- KP229E3518 TurboMAP: Analog Turbo Manifold Air Pressure Sensor
- KP236 BAP: Analog Barometric Air Pressure
- KP254 dBAP: Digital Barometric Air Pressure (SPI)
The KP215, KP229 and KP236 variants provide an analog interface, the KP254 provides SPI and the KP275 provides SENT digital communication interface.
- Pressure and external temperature measurement - ONLY KP275dMAP
- CSV file can be generated for each derivative
- External NTC included, KP275-PS2GO-KIT
- Configuration of different transfer functions possible, KP215F1701-PS2GO-KIT and KP229E3518-PS2GO-KIT
- A pressure connector consisting of fast connector for 6mm tubes, pressure couple and sealing is included
- GUI software for free download
Infineon’s sensor 2GO kits are new budget-priced evaluation boards that are already equipped with a sensor combined with an ARM® Cortex®-M0 CPU. The sensor 2GO kits provide a complete set of on-board devices, including an on-board debugger. Build your own application and gadget with the sensor 2GO kits. Our 2GO kits are ready-to-use plug-and-play boards.
- Budget-priced evaluation board for speed sensing
- Complete speed sensor incl. back-bias magnet, fixing and cable
- TLE4922 (active mono cell Hall sensor)
- XMC1100 (ARM® Cortex™-M0 based)
- On-board J-Link Lite Debugger (Realized with XMC4200 microcontroller)
- Power over USB (Micro USB), ESD and reverse current protection
- GUI based tool for real in-application evaluation for free download
Infineon’s sensor 2GO kits are new budget-priced evaluation boards that are already equipped with a sensor combined with an ARM® Cortex®-M0 CPU. The sensor 2GO kits provide a complete set of on-board devices, including an on-board debugger. Build your own application and gadget with the sensor 2GO kits. Our 2GO kits are ready-to-use plug-and-play boards.
- Budget-priced evaluation board for speed sensing
- Complete speed sensor incl. back-bias magnet, fixing and cable
- TLE4922 (active mono cell Hall sensor)
- XMC1100 (ARM® Cortex™-M0 based)
- On-board J-Link Lite Debugger (Realized with XMC4200 microcontroller)
- Power over USB (Micro USB), ESD and reverse current protection
- GUI based tool for real in-application evaluation for free download
Infineon’s sensor 2GO kits are new budget-priced evaluation boards that are already equipped with a sensor combined with an ARM® Cortex®-M0 CPU. The sensor 2GO kits provide a complete set of on-board devices, including an on-board debugger. Build your own application and gadget with the sensor 2GO kits. Our 2GO kits are ready-to-use plug-and-play boards.
- Budget-priced evaluation board for speed sensing
- Complete speed sensor incl. back-bias magnet, fixing and cable
- TLE4922 (active mono cell Hall sensor)
- XMC1100 (ARM® Cortex™-M0 based)
- On-board J-Link Lite Debugger (Realized with XMC4200 microcontroller)
- Power over USB (Micro USB), ESD and reverse current protection
- GUI based tool for real in-application evaluation for free download
The flex evaluation kit allows simple and easy evaluation of XENSIV™ MEMS microphone IM67D130. The flex board can be easily connected to audio testing setup. The evaluation kit includes five IM67D130 mounted on flex board and one adapter board
- Quick and easy evaluation of XENSIV™ MEMS microphones
- Flex dimensions: 25 x 4.5 mm
- Adapter dimensions: 20 x 15 mm
The flex evaluation kit allows simple and easy evaluation of XENSIV™ MEMS microphone IM67D130. The flex board can be easily connected to audio testing setup. The evaluation kit includes five IM67D130 mounted on flex board and one adapter board
- Quick and easy evaluation of XENSIV™ MEMS microphones
- Flex dimensions: 25 x 4.5 mm
- Adapter dimensions: 20 x 15 mm
The flex evaluation kit allows simple and easy evaluation of XENSIV™ MEMS microphone IM67D130. The flex board can be easily connected to audio testing setup. The evaluation kit includes five IM67D130 mounted on flex board and one adapter board
- Quick and easy evaluation of XENSIV™ MEMS microphones
- Flex dimensions: 25 x 4.5 mm
- Adapter dimensions: 20 x 15 mm
The flex evaluation kit allows simple and easy evaluation of XENSIV™ MEMS microphone IM67D120A. The flex board can be easily connected to audio testing setup. The evaluation kit includes five IM67D120A mounted on flex board and one adapter board.
- Quick and easy evaluation of XENSIV™ MEMS microphones
- Flex dimensions: 25 x 4.5 mm
- Adapter dimensions: 20 x 15 mm
The flex evaluation kit allows simple and easy evaluation of XENSIV™ MEMS microphone IM67D120A. The flex board can be easily connected to audio testing setup. The evaluation kit includes five IM67D120A mounted on flex board and one adapter board.
- Quick and easy evaluation of XENSIV™ MEMS microphones
- Flex dimensions: 25 x 4.5 mm
- Adapter dimensions: 20 x 15 mm
The flex evaluation kit allows simple and easy evaluation of XENSIV™ MEMS microphone IM67D120A. The flex board can be easily connected to audio testing setup. The evaluation kit includes five IM67D120A mounted on flex board and one adapter board.
- Quick and easy evaluation of XENSIV™ MEMS microphones
- Flex dimensions: 25 x 4.5 mm
- Adapter dimensions: 20 x 15 mm
The flex evaluation kit allows simple and easy evaluation of XENSIV™ MEMS microphone IM69D130. The flex board can be easily connected to audio testing setup. The evaluation kit includes five IM69D130 mounted on flex board and one adapter board.
- Quick and easy evaluation of XENSIV™ MEMS microphones
- Flex dimensions: 25 x 4.5 mm
- Adapter dimensions: 20 x 15 mm
The flex evaluation kit allows simple and easy evaluation of XENSIV™ MEMS microphone IM69D130. The flex board can be easily connected to audio testing setup. The evaluation kit includes five IM69D130 mounted on flex board and one adapter board.
- Quick and easy evaluation of XENSIV™ MEMS microphones
- Flex dimensions: 25 x 4.5 mm
- Adapter dimensions: 20 x 15 mm
The flex evaluation kit allows simple and easy evaluation of XENSIV™ MEMS microphone IM69D130. The flex board can be easily connected to audio testing setup. The evaluation kit includes five IM69D130 mounted on flex board and one adapter board.
- Quick and easy evaluation of XENSIV™ MEMS microphones
- Flex dimensions: 25 x 4.5 mm
- Adapter dimensions: 20 x 15 mm
Our XENSIVTM Spindle2Go can be mounted on 3D magnetic sensor Shield2Go. The ring magnet is included. Please note that the Shield2Go is not included, needs to be ordered separately.
Our XENSIVTM Spindle2Go can be mounted on 3D magnetic sensor Shield2Go. The ring magnet is included. Please note that the Shield2Go is not included, needs to be ordered separately.
Our XENSIVTM Spindle2Go can be mounted on 3D magnetic sensor Shield2Go. The ring magnet is included. Please note that the Shield2Go is not included, needs to be ordered separately.
Easy mounting on all 3D magnetic sensor 2GO kits and and Shield2Go
Linear movements and direction selection, combined with only one magnet
Easy mounting on all 3D magnetic sensor 2GO kits and and Shield2Go
Linear movements and direction selection, combined with only one magnet
Easy mounting on all 3D magnetic sensor 2GO kits and and Shield2Go
Linear movements and direction selection, combined with only one magnet
- Easy mouning on the Hall switch Shield2Go, TLE4963-3M, S2GO_HALL_TLE4964-3M
- Open & close detection with magnet for positions detection
- Presence and non-presence detection
- Link to OpenClose adapter
- Easy mouning on the Hall switch Shield2Go, TLE4963-3M, S2GO_HALL_TLE4964-3M
- Open & close detection with magnet for positions detection
- Presence and non-presence detection
- Link to OpenClose adapter
- Easy mouning on the Hall switch Shield2Go, TLE4963-3M, S2GO_HALL_TLE4964-3M
- Open & close detection with magnet for positions detection
- Presence and non-presence detection
- Link to OpenClose adapter
- Easy mounting on all 3D magnetic and angle sensor 2GO kits as well as 3D magnetic sensor Shield2Go
- Rotate knob with magnet as used in control elements and push buttons
- Use cases 3D magnetic sensors: rotational and vertical movements of control elements and push buttons
- Use cases angle sensors: simulates rotational movements for angle measurements
- Link to Rotate Knob 3D magnetic
- Link to Rotate Knob angle sensors
- Easy mounting on all 3D magnetic and angle sensor 2GO kits as well as 3D magnetic sensor Shield2Go
- Rotate knob with magnet as used in control elements and push buttons
- Use cases 3D magnetic sensors: rotational and vertical movements of control elements and push buttons
- Use cases angle sensors: simulates rotational movements for angle measurements
- Link to Rotate Knob 3D magnetic
- Link to Rotate Knob angle sensors
- Easy mounting on all 3D magnetic and angle sensor 2GO kits as well as 3D magnetic sensor Shield2Go
- Rotate knob with magnet as used in control elements and push buttons
- Use cases 3D magnetic sensors: rotational and vertical movements of control elements and push buttons
- Use cases angle sensors: simulates rotational movements for angle measurements
- Link to Rotate Knob 3D magnetic
- Link to Rotate Knob angle sensors
- Easy mounting on all 3D magnetic sensor 2GO kits and Shield2Go
- Use case: angle measurement in out of shaft configuration with 3D Hall sensor
- Three different out of shaft configurations possible (x-z, y-z and x-y axis)
- Magnetic rotation bar with ring magnet included
- Link to out of shaft adapter
- Easy mounting on all 3D magnetic sensor 2GO kits and Shield2Go
- Use case: angle measurement in out of shaft configuration with 3D Hall sensor
- Three different out of shaft configurations possible (x-z, y-z and x-y axis)
- Magnetic rotation bar with ring magnet included
- Link to out of shaft adapter
- Easy mounting on all 3D magnetic sensor 2GO kits and Shield2Go
- Use case: angle measurement in out of shaft configuration with 3D Hall sensor
- Three different out of shaft configurations possible (x-z, y-z and x-y axis)
- Magnetic rotation bar with ring magnet included
- Link to out of shaft adapter
- Easy mounting on all 3D magnetic sensor 2GO kits and Shield2Go
- First magnetic joystick measurements within minutes
- Link to joystick
- Easy mounting on all 3D magnetic sensor 2GO kits and Shield2Go
- First magnetic joystick measurements within minutes
- Link to joystick
- Easy mounting on all 3D magnetic sensor 2GO kits and Shield2Go
- First magnetic joystick measurements within minutes
- Link to joystick
- Easy mounting on all 3D magnetic sensor 2GO kits and Shield2Go
- First magnetic Linear evaluations within minutes
- Use case: linear movements
- Linear slider with magnet - flexible setup: adaptable air-gaps, two different magnetic strengths/materials & distance limiters
- Link to linear slider
- Easy mounting on all 3D magnetic sensor 2GO kits and Shield2Go
- First magnetic Linear evaluations within minutes
- Use case: linear movements
- Linear slider with magnet - flexible setup: adaptable air-gaps, two different magnetic strengths/materials & distance limiters
- Link to linear slider
- Easy mounting on all 3D magnetic sensor 2GO kits and Shield2Go
- First magnetic Linear evaluations within minutes
- Use case: linear movements
- Linear slider with magnet - flexible setup: adaptable air-gaps, two different magnetic strengths/materials & distance limiters
- Link to linear slider
- Easy Mountig on all 3D magnetic sensor 2GO kits and Shield2Go
- Use Case: Human-Machine-Interface (3x3 position matrix) for e.g. automotive direction indicator
- Magnetic direction indicator with magnet included in handle bar
- Link to direction indicator
- Easy Mountig on all 3D magnetic sensor 2GO kits and Shield2Go
- Use Case: Human-Machine-Interface (3x3 position matrix) for e.g. automotive direction indicator
- Magnetic direction indicator with magnet included in handle bar
- Link to direction indicator
- Easy Mountig on all 3D magnetic sensor 2GO kits and Shield2Go
- Use Case: Human-Machine-Interface (3x3 position matrix) for e.g. automotive direction indicator
- Magnetic direction indicator with magnet included in handle bar
- Link to direction indicator
- Easy mounting on all 3D magnetic sensor 2GO kits and Shield2Go
- Use Case: Control Trigger for e.g. Power Drill (Linear position measurements with 3D Hall sensor)
- Magnetic slider with magnet included
- Link to control trigger
- Easy mounting on all 3D magnetic sensor 2GO kits and Shield2Go
- Use Case: Control Trigger for e.g. Power Drill (Linear position measurements with 3D Hall sensor)
- Magnetic slider with magnet included
- Link to control trigger
- Easy mounting on all 3D magnetic sensor 2GO kits and Shield2Go
- Use Case: Control Trigger for e.g. Power Drill (Linear position measurements with 3D Hall sensor)
- Magnetic slider with magnet included
- Link to control trigger
- Easy mounting on all 3D magnetic sensor 2GO kits and Shield2Go
- Use case: Left/Rigth/Forward and Backward including 360° rotation at all positions
- Control element includes magnet
- Link to mini control
Please note: The MiniControl implements Infineon IP. Use of this Infineon IP is free of charge as long as only Infineon sensor products are used.
For a free-of-charge license, please contact systemlicensing@infineon.com. We are happy to help
- Easy mounting on all 3D magnetic sensor 2GO kits and Shield2Go
- Use case: Left/Rigth/Forward and Backward including 360° rotation at all positions
- Control element includes magnet
- Link to mini control
Please note: The MiniControl implements Infineon IP. Use of this Infineon IP is free of charge as long as only Infineon sensor products are used.
For a free-of-charge license, please contact systemlicensing@infineon.com. We are happy to help
- Easy mounting on all 3D magnetic sensor 2GO kits and Shield2Go
- Use case: Left/Rigth/Forward and Backward including 360° rotation at all positions
- Control element includes magnet
- Link to mini control
Please note: The MiniControl implements Infineon IP. Use of this Infineon IP is free of charge as long as only Infineon sensor products are used.
For a free-of-charge license, please contact systemlicensing@infineon.com. We are happy to help
XENSIV™ - Bluetooth® game controller featuring a unique gaming experience with XENSIV™, CAPSENSE™, SPIDER+ and PSoC™6 BLE technology.
- XENSIV™ 3D magnetic joysticks/triggers
- XENSIV™ magnetic switches
- CAPSENSE™ capacitive touch buttons
- SPIDER+ rumble driver
- PSoC™6 Bluetooth® LE microcontroller
XENSIV™ - Bluetooth® game controller featuring a unique gaming experience with XENSIV™, CAPSENSE™, SPIDER+ and PSoC™6 BLE technology.
- XENSIV™ 3D magnetic joysticks/triggers
- XENSIV™ magnetic switches
- CAPSENSE™ capacitive touch buttons
- SPIDER+ rumble driver
- PSoC™6 Bluetooth® LE microcontroller
XENSIV™ - Bluetooth® game controller featuring a unique gaming experience with XENSIV™, CAPSENSE™, SPIDER+ and PSoC™6 BLE technology.
- XENSIV™ 3D magnetic joysticks/triggers
- XENSIV™ magnetic switches
- CAPSENSE™ capacitive touch buttons
- SPIDER+ rumble driver
- PSoC™6 Bluetooth® LE microcontroller
Infineon’s S2GO_3D_TLE493D-W2B6-A0 boards offer a unique customer and evaluation experience – the boards are equipped with one TLE493D-W2B6 magnetic sensor and come with a ready to use Arduino library. Customers can now develop their own system solutions by combining Shield2Go boards together with Infineon My IoT adapters. My IoT adapters are gateways to external hardware solutions like Arduino and Raspberry PI, which are popular IoT evaluation platforms. All this enables the fastest evaluation and development of IoT system on the market.
Infineon’s S2GO_3D_TLE493D-W2B6-A0 boards offer a unique customer and evaluation experience – the boards are equipped with one TLE493D-W2B6 magnetic sensor and come with a ready to use Arduino library. Customers can now develop their own system solutions by combining Shield2Go boards together with Infineon My IoT adapters. My IoT adapters are gateways to external hardware solutions like Arduino and Raspberry PI, which are popular IoT evaluation platforms. All this enables the fastest evaluation and development of IoT system on the market.
Infineon’s S2GO_3D_TLE493D-W2B6-A0 boards offer a unique customer and evaluation experience – the boards are equipped with one TLE493D-W2B6 magnetic sensor and come with a ready to use Arduino library. Customers can now develop their own system solutions by combining Shield2Go boards together with Infineon My IoT adapters. My IoT adapters are gateways to external hardware solutions like Arduino and Raspberry PI, which are popular IoT evaluation platforms. All this enables the fastest evaluation and development of IoT system on the market.
Infineon’s S2GO_Hall_TLE4964-3M boards offer a unique customer and evaluation experience – the boards are equipped with one TLE4964-3M magnetic hall sensor and come with a ready to use Arduino library. Customers can now develop their own system solutions by combining Shield2Go boards together with Infineon My IoT adapters. My IoT adapters are gateways to external hardware solutions like Arduino and Raspberry PI, which are popular IoT evaluation platforms. All this enables the fastest evaluation and development of IoT system on the market!
Infineon’s S2GO_Hall_TLE4964-3M boards offer a unique customer and evaluation experience – the boards are equipped with one TLE4964-3M magnetic hall sensor and come with a ready to use Arduino library. Customers can now develop their own system solutions by combining Shield2Go boards together with Infineon My IoT adapters. My IoT adapters are gateways to external hardware solutions like Arduino and Raspberry PI, which are popular IoT evaluation platforms. All this enables the fastest evaluation and development of IoT system on the market!
Infineon’s S2GO_Hall_TLE4964-3M boards offer a unique customer and evaluation experience – the boards are equipped with one TLE4964-3M magnetic hall sensor and come with a ready to use Arduino library. Customers can now develop their own system solutions by combining Shield2Go boards together with Infineon My IoT adapters. My IoT adapters are gateways to external hardware solutions like Arduino and Raspberry PI, which are popular IoT evaluation platforms. All this enables the fastest evaluation and development of IoT system on the market!
Infineon’s S2GO_2_Hall_TLE4966K boards offer a unique customer and evaluation experience – the boards are equipped with one TLE4966K integrated circuit double Hall-effect sensor and come with a ready to use Arduino library. Customers can now develop their own system solutions by combining Shield2Go boards together with Infineon My IoT adapters. My IoT adapters are gateways to external hardware solutions like Arduino and Raspberry PI, which are popular IoT evaluation platforms. All this enables the fastest evaluation and development of IoT system on the market!
Infineon’s S2GO_2_Hall_TLE4966K boards offer a unique customer and evaluation experience – the boards are equipped with one TLE4966K integrated circuit double Hall-effect sensor and come with a ready to use Arduino library. Customers can now develop their own system solutions by combining Shield2Go boards together with Infineon My IoT adapters. My IoT adapters are gateways to external hardware solutions like Arduino and Raspberry PI, which are popular IoT evaluation platforms. All this enables the fastest evaluation and development of IoT system on the market!
Infineon’s S2GO_2_Hall_TLE4966K boards offer a unique customer and evaluation experience – the boards are equipped with one TLE4966K integrated circuit double Hall-effect sensor and come with a ready to use Arduino library. Customers can now develop their own system solutions by combining Shield2Go boards together with Infineon My IoT adapters. My IoT adapters are gateways to external hardware solutions like Arduino and Raspberry PI, which are popular IoT evaluation platforms. All this enables the fastest evaluation and development of IoT system on the market!
Infineon’s new XENSIVTM S2GO_3D_TLI493D-W2BW-A0 boards offer a unique customer and evaluation experience – the boards are equipped with one TLI493D-W2BW-A0 magnetic sensor and come with a ready to use Arduino library. Customers can now develop their own system solutions by combining Shield2Go boards together with Infineon My IoT adapters. My IoT adapters are gateways to external hardware solutions like Arduino and Raspberry PI, which are popular IoT evaluation platforms. All this enables the fastest evaluation and development of IoT system on the market! It can be used together with XMC2go platform (plugged on top as depicted below: the sensor is placed above the USB connector). The hardware can be also connected remotely to any 3.3V compatible development kit. Attention: Do not connect the shield directly to Arduino UNO platforms which are operating at 5V!
Infineon’s new XENSIVTM S2GO_3D_TLI493D-W2BW-A0 boards offer a unique customer and evaluation experience – the boards are equipped with one TLI493D-W2BW-A0 magnetic sensor and come with a ready to use Arduino library. Customers can now develop their own system solutions by combining Shield2Go boards together with Infineon My IoT adapters. My IoT adapters are gateways to external hardware solutions like Arduino and Raspberry PI, which are popular IoT evaluation platforms. All this enables the fastest evaluation and development of IoT system on the market! It can be used together with XMC2go platform (plugged on top as depicted below: the sensor is placed above the USB connector). The hardware can be also connected remotely to any 3.3V compatible development kit. Attention: Do not connect the shield directly to Arduino UNO platforms which are operating at 5V!
Infineon’s new XENSIVTM S2GO_3D_TLI493D-W2BW-A0 boards offer a unique customer and evaluation experience – the boards are equipped with one TLI493D-W2BW-A0 magnetic sensor and come with a ready to use Arduino library. Customers can now develop their own system solutions by combining Shield2Go boards together with Infineon My IoT adapters. My IoT adapters are gateways to external hardware solutions like Arduino and Raspberry PI, which are popular IoT evaluation platforms. All this enables the fastest evaluation and development of IoT system on the market! It can be used together with XMC2go platform (plugged on top as depicted below: the sensor is placed above the USB connector). The hardware can be also connected remotely to any 3.3V compatible development kit. Attention: Do not connect the shield directly to Arduino UNO platforms which are operating at 5V!
TLI4971 S2GO (Shield2Go) version consists of 3 main building blocks:
- Sensor board (top): Incorporating the TLI4971 industrial current sensor (equipped with M4 screw connectors for high current capabilities < 20A)
- Adapter board (Shield2Go format): The adapter board comes in the Shield2Go pinout and can be connected to the sensor board via the PCB edge connectors. It implements sensor application circuit & peripherals as well as pinout to the Infineon XMC 2Go MCU platform.
- Ziplock bag with: 2xM4 screws, 1 PCB edge connector (for connecting the sensor board to the adapter board in the Shield2Go formfactor), pin headers (male & female)
The TLI4971 S2GO does not offer programmability features, but all programming features can be explored by RAM settings.
TLI4971 S2GO (Shield2Go) version consists of 3 main building blocks:
- Sensor board (top): Incorporating the TLI4971 industrial current sensor (equipped with M4 screw connectors for high current capabilities < 20A)
- Adapter board (Shield2Go format): The adapter board comes in the Shield2Go pinout and can be connected to the sensor board via the PCB edge connectors. It implements sensor application circuit & peripherals as well as pinout to the Infineon XMC 2Go MCU platform.
- Ziplock bag with: 2xM4 screws, 1 PCB edge connector (for connecting the sensor board to the adapter board in the Shield2Go formfactor), pin headers (male & female)
The TLI4971 S2GO does not offer programmability features, but all programming features can be explored by RAM settings.
TLI4971 S2GO (Shield2Go) version consists of 3 main building blocks:
- Sensor board (top): Incorporating the TLI4971 industrial current sensor (equipped with M4 screw connectors for high current capabilities < 20A)
- Adapter board (Shield2Go format): The adapter board comes in the Shield2Go pinout and can be connected to the sensor board via the PCB edge connectors. It implements sensor application circuit & peripherals as well as pinout to the Infineon XMC 2Go MCU platform.
- Ziplock bag with: 2xM4 screws, 1 PCB edge connector (for connecting the sensor board to the adapter board in the Shield2Go formfactor), pin headers (male & female)
The TLI4971 S2GO does not offer programmability features, but all programming features can be explored by RAM settings.
Infineon’s S2Go_3DSense_TLV493D boards offer a unique customer and evaluation experience – the boards are equipped with one TLV493D-A1B6 magnetic sensor and come with a ready to use Arduino library. Customers can now develop their own system solutions by combining Shield2Go boards together with Infineon My IoT adapters. My IoT adapters are gateways to external hardware solutions like Arduino and Raspberry PI, which are popular IoT evaluation platforms. All this enables the fastest evaluation and development of IoT system on the market!
Infineon’s S2Go_3DSense_TLV493D boards offer a unique customer and evaluation experience – the boards are equipped with one TLV493D-A1B6 magnetic sensor and come with a ready to use Arduino library. Customers can now develop their own system solutions by combining Shield2Go boards together with Infineon My IoT adapters. My IoT adapters are gateways to external hardware solutions like Arduino and Raspberry PI, which are popular IoT evaluation platforms. All this enables the fastest evaluation and development of IoT system on the market!
Infineon’s S2Go_3DSense_TLV493D boards offer a unique customer and evaluation experience – the boards are equipped with one TLV493D-A1B6 magnetic sensor and come with a ready to use Arduino library. Customers can now develop their own system solutions by combining Shield2Go boards together with Infineon My IoT adapters. My IoT adapters are gateways to external hardware solutions like Arduino and Raspberry PI, which are popular IoT evaluation platforms. All this enables the fastest evaluation and development of IoT system on the market!
TLI4971 S2GO (Shield2Go) version consists of 3 main building blocks:
- Sensor board (top): Incorporating the TLI4971 industrial current sensor (equipped with M4 screw connectors for high current capabilities < 20A)
- Adapter board (Shield2Go format): The adapter board comes in the Shield2Go pinout and can be connected to the sensor board via the PCB edge connectors. It implements sensor application circuit & peripherals as well as pinout to the Infineon XMC 2Go MCU platform.
- Ziplock bag with: 2xM4 screws, 1 PCB edge connector (for connecting the sensor board to the adapter board in the Shield2Go formfactor), pin headers (male & female)
The TLI4971 S2GO does not offer programmability features, but all programming features can be explored by RAM settings.
TLI4971 S2GO (Shield2Go) version consists of 3 main building blocks:
- Sensor board (top): Incorporating the TLI4971 industrial current sensor (equipped with M4 screw connectors for high current capabilities < 20A)
- Adapter board (Shield2Go format): The adapter board comes in the Shield2Go pinout and can be connected to the sensor board via the PCB edge connectors. It implements sensor application circuit & peripherals as well as pinout to the Infineon XMC 2Go MCU platform.
- Ziplock bag with: 2xM4 screws, 1 PCB edge connector (for connecting the sensor board to the adapter board in the Shield2Go formfactor), pin headers (male & female)
The TLI4971 S2GO does not offer programmability features, but all programming features can be explored by RAM settings.
TLI4971 S2GO (Shield2Go) version consists of 3 main building blocks:
- Sensor board (top): Incorporating the TLI4971 industrial current sensor (equipped with M4 screw connectors for high current capabilities < 20A)
- Adapter board (Shield2Go format): The adapter board comes in the Shield2Go pinout and can be connected to the sensor board via the PCB edge connectors. It implements sensor application circuit & peripherals as well as pinout to the Infineon XMC 2Go MCU platform.
- Ziplock bag with: 2xM4 screws, 1 PCB edge connector (for connecting the sensor board to the adapter board in the Shield2Go formfactor), pin headers (male & female)
The TLI4971 S2GO does not offer programmability features, but all programming features can be explored by RAM settings.
Infineon’s Shield2Go boards offer a unique customer and evaluation experience – the boards are equipped with one DPS422 barometric pressure sensor and come with a ready to use Arduino library. Customers can now develop their own system solutions by combining Shield2Go boards together with Infineon My IoT adapters. My IoT adapters are gateways to external hardware solutions like Arduino and Raspberry PI, which are popular IoT hardware platforms. All this enables the fastest evaluation and development of IoT system.
Infineon’s Shield2Go boards offer a unique customer and evaluation experience – the boards are equipped with one DPS422 barometric pressure sensor and come with a ready to use Arduino library. Customers can now develop their own system solutions by combining Shield2Go boards together with Infineon My IoT adapters. My IoT adapters are gateways to external hardware solutions like Arduino and Raspberry PI, which are popular IoT hardware platforms. All this enables the fastest evaluation and development of IoT system.
Infineon’s Shield2Go boards offer a unique customer and evaluation experience – the boards are equipped with one DPS422 barometric pressure sensor and come with a ready to use Arduino library. Customers can now develop their own system solutions by combining Shield2Go boards together with Infineon My IoT adapters. My IoT adapters are gateways to external hardware solutions like Arduino and Raspberry PI, which are popular IoT hardware platforms. All this enables the fastest evaluation and development of IoT system.
Infineon’s Shield2Go boards offer a unique customer and evaluation experience – the boards are equipped with two High-performance digital MEMS Microphone IM69D130 and come with a ready to use Arduino library. Customers can now develop their own system solutions by combining Shield2Go boards together with Infineon My IoT adapters. My IoT adapters are gateways to external hardware solutions like Arduino and Raspberry PI, which are popular IoT hardware platforms. All this enables the fastest evaluation and development of IoT system.
Infineon’s Shield2Go boards offer a unique customer and evaluation experience – the boards are equipped with two High-performance digital MEMS Microphone IM69D130 and come with a ready to use Arduino library. Customers can now develop their own system solutions by combining Shield2Go boards together with Infineon My IoT adapters. My IoT adapters are gateways to external hardware solutions like Arduino and Raspberry PI, which are popular IoT hardware platforms. All this enables the fastest evaluation and development of IoT system.
Infineon’s Shield2Go boards offer a unique customer and evaluation experience – the boards are equipped with two High-performance digital MEMS Microphone IM69D130 and come with a ready to use Arduino library. Customers can now develop their own system solutions by combining Shield2Go boards together with Infineon My IoT adapters. My IoT adapters are gateways to external hardware solutions like Arduino and Raspberry PI, which are popular IoT hardware platforms. All this enables the fastest evaluation and development of IoT system.
Infineon’s Shield2Go boards offer a unique customer and evaluation experience – the boards are equipped with one Infineon IC and come with a ready to use Arduino library. Customers can now develop their own system solutions by combining Shield2Go boards together with Infineon My IoT adapters. My IoT adapters are gateways to external hardware solutions like Arduino and Raspberry PI, which are popular IoT hardware platforms. All this enables the fastest evaluation and development of IoT system.
Infineon’s Shield2Go boards offer a unique customer and evaluation experience – the boards are equipped with one Infineon IC and come with a ready to use Arduino library. Customers can now develop their own system solutions by combining Shield2Go boards together with Infineon My IoT adapters. My IoT adapters are gateways to external hardware solutions like Arduino and Raspberry PI, which are popular IoT hardware platforms. All this enables the fastest evaluation and development of IoT system.
Infineon’s Shield2Go boards offer a unique customer and evaluation experience – the boards are equipped with one Infineon IC and come with a ready to use Arduino library. Customers can now develop their own system solutions by combining Shield2Go boards together with Infineon My IoT adapters. My IoT adapters are gateways to external hardware solutions like Arduino and Raspberry PI, which are popular IoT hardware platforms. All this enables the fastest evaluation and development of IoT system.
Summary of features:
- Contactless magnetic based „4-bit DIP Switch“ for configuration using a magnetic 3D sensor for detection
- Four movable tiny magnets are used to configure a four bit value
Potential applications:
- Industrial
- Consumer
Complementary magnets:
Simply use our 3D printing files and start your 3D print.
Summary of features:
- Contactless magnetic based „4-bit DIP Switch“ for configuration using a magnetic 3D sensor for detection
- Four movable tiny magnets are used to configure a four bit value
Potential applications:
- Industrial
- Consumer
Complementary magnets:
Simply use our 3D printing files and start your 3D print.
Summary of features:
- Contactless magnetic based „4-bit DIP Switch“ for configuration using a magnetic 3D sensor for detection
- Four movable tiny magnets are used to configure a four bit value
Potential applications:
- Industrial
- Consumer
Complementary magnets:
Simply use our 3D printing files and start your 3D print.
The flex evaluation kit allows simple and easy evaluation of XENSIV™ MEMS microphone IM67D130. The flex board can be easily connected to audio testing setup. The evaluation kit includes five IM67D130 mounted on flex board and one adapter board
- Quick and easy evaluation of XENSIV™ MEMS microphones
- Flex dimensions: 25 x 4.5 mm
- Adapter dimensions: 20 x 15 mm
The flex evaluation kit allows simple and easy evaluation of XENSIV™ MEMS microphone IM67D130. The flex board can be easily connected to audio testing setup. The evaluation kit includes five IM67D130 mounted on flex board and one adapter board
- Quick and easy evaluation of XENSIV™ MEMS microphones
- Flex dimensions: 25 x 4.5 mm
- Adapter dimensions: 20 x 15 mm
The flex evaluation kit allows simple and easy evaluation of XENSIV™ MEMS microphone IM67D130. The flex board can be easily connected to audio testing setup. The evaluation kit includes five IM67D130 mounted on flex board and one adapter board
- Quick and easy evaluation of XENSIV™ MEMS microphones
- Flex dimensions: 25 x 4.5 mm
- Adapter dimensions: 20 x 15 mm
The flex evaluation kit allows simple and easy evaluation of XENSIV™ MEMS microphone IM67D120A. The flex board can be easily connected to audio testing setup. The evaluation kit includes five IM67D120A mounted on flex board and one adapter board.
- Quick and easy evaluation of XENSIV™ MEMS microphones
- Flex dimensions: 25 x 4.5 mm
- Adapter dimensions: 20 x 15 mm
The flex evaluation kit allows simple and easy evaluation of XENSIV™ MEMS microphone IM67D120A. The flex board can be easily connected to audio testing setup. The evaluation kit includes five IM67D120A mounted on flex board and one adapter board.
- Quick and easy evaluation of XENSIV™ MEMS microphones
- Flex dimensions: 25 x 4.5 mm
- Adapter dimensions: 20 x 15 mm
The flex evaluation kit allows simple and easy evaluation of XENSIV™ MEMS microphone IM67D120A. The flex board can be easily connected to audio testing setup. The evaluation kit includes five IM67D120A mounted on flex board and one adapter board.
- Quick and easy evaluation of XENSIV™ MEMS microphones
- Flex dimensions: 25 x 4.5 mm
- Adapter dimensions: 20 x 15 mm
The flex evaluation kit allows simple and easy evaluation of XENSIV™ MEMS microphone IM69D130. The flex board can be easily connected to audio testing setup. The evaluation kit includes five IM69D130 mounted on flex board and one adapter board.
- Quick and easy evaluation of XENSIV™ MEMS microphones
- Flex dimensions: 25 x 4.5 mm
- Adapter dimensions: 20 x 15 mm
The flex evaluation kit allows simple and easy evaluation of XENSIV™ MEMS microphone IM69D130. The flex board can be easily connected to audio testing setup. The evaluation kit includes five IM69D130 mounted on flex board and one adapter board.
- Quick and easy evaluation of XENSIV™ MEMS microphones
- Flex dimensions: 25 x 4.5 mm
- Adapter dimensions: 20 x 15 mm
The flex evaluation kit allows simple and easy evaluation of XENSIV™ MEMS microphone IM69D130. The flex board can be easily connected to audio testing setup. The evaluation kit includes five IM69D130 mounted on flex board and one adapter board.
- Quick and easy evaluation of XENSIV™ MEMS microphones
- Flex dimensions: 25 x 4.5 mm
- Adapter dimensions: 20 x 15 mm
Our XENSIVTM Spindle2Go can be mounted on 3D magnetic sensor Shield2Go. The ring magnet is included. Please note that the Shield2Go is not included, needs to be ordered separately.
Our XENSIVTM Spindle2Go can be mounted on 3D magnetic sensor Shield2Go. The ring magnet is included. Please note that the Shield2Go is not included, needs to be ordered separately.
Our XENSIVTM Spindle2Go can be mounted on 3D magnetic sensor Shield2Go. The ring magnet is included. Please note that the Shield2Go is not included, needs to be ordered separately.
Easy mounting on all 3D magnetic sensor 2GO kits and and Shield2Go
Linear movements and direction selection, combined with only one magnet
Easy mounting on all 3D magnetic sensor 2GO kits and and Shield2Go
Linear movements and direction selection, combined with only one magnet
Easy mounting on all 3D magnetic sensor 2GO kits and and Shield2Go
Linear movements and direction selection, combined with only one magnet
- Easy mouning on the Hall switch Shield2Go, TLE4963-3M, S2GO_HALL_TLE4964-3M
- Open & close detection with magnet for positions detection
- Presence and non-presence detection
- Link to OpenClose adapter
- Easy mouning on the Hall switch Shield2Go, TLE4963-3M, S2GO_HALL_TLE4964-3M
- Open & close detection with magnet for positions detection
- Presence and non-presence detection
- Link to OpenClose adapter
- Easy mouning on the Hall switch Shield2Go, TLE4963-3M, S2GO_HALL_TLE4964-3M
- Open & close detection with magnet for positions detection
- Presence and non-presence detection
- Link to OpenClose adapter
- Easy mounting on all 3D magnetic and angle sensor 2GO kits as well as 3D magnetic sensor Shield2Go
- Rotate knob with magnet as used in control elements and push buttons
- Use cases 3D magnetic sensors: rotational and vertical movements of control elements and push buttons
- Use cases angle sensors: simulates rotational movements for angle measurements
- Link to Rotate Knob 3D magnetic
- Link to Rotate Knob angle sensors
- Easy mounting on all 3D magnetic and angle sensor 2GO kits as well as 3D magnetic sensor Shield2Go
- Rotate knob with magnet as used in control elements and push buttons
- Use cases 3D magnetic sensors: rotational and vertical movements of control elements and push buttons
- Use cases angle sensors: simulates rotational movements for angle measurements
- Link to Rotate Knob 3D magnetic
- Link to Rotate Knob angle sensors
- Easy mounting on all 3D magnetic and angle sensor 2GO kits as well as 3D magnetic sensor Shield2Go
- Rotate knob with magnet as used in control elements and push buttons
- Use cases 3D magnetic sensors: rotational and vertical movements of control elements and push buttons
- Use cases angle sensors: simulates rotational movements for angle measurements
- Link to Rotate Knob 3D magnetic
- Link to Rotate Knob angle sensors
- Easy mounting on all 3D magnetic sensor 2GO kits and Shield2Go
- Use case: angle measurement in out of shaft configuration with 3D Hall sensor
- Three different out of shaft configurations possible (x-z, y-z and x-y axis)
- Magnetic rotation bar with ring magnet included
- Link to out of shaft adapter
- Easy mounting on all 3D magnetic sensor 2GO kits and Shield2Go
- Use case: angle measurement in out of shaft configuration with 3D Hall sensor
- Three different out of shaft configurations possible (x-z, y-z and x-y axis)
- Magnetic rotation bar with ring magnet included
- Link to out of shaft adapter
- Easy mounting on all 3D magnetic sensor 2GO kits and Shield2Go
- Use case: angle measurement in out of shaft configuration with 3D Hall sensor
- Three different out of shaft configurations possible (x-z, y-z and x-y axis)
- Magnetic rotation bar with ring magnet included
- Link to out of shaft adapter
- Easy mounting on all 3D magnetic sensor 2GO kits and Shield2Go
- First magnetic joystick measurements within minutes
- Link to joystick
- Easy mounting on all 3D magnetic sensor 2GO kits and Shield2Go
- First magnetic joystick measurements within minutes
- Link to joystick
- Easy mounting on all 3D magnetic sensor 2GO kits and Shield2Go
- First magnetic joystick measurements within minutes
- Link to joystick
- Easy mounting on all 3D magnetic sensor 2GO kits and Shield2Go
- First magnetic Linear evaluations within minutes
- Use case: linear movements
- Linear slider with magnet - flexible setup: adaptable air-gaps, two different magnetic strengths/materials & distance limiters
- Link to linear slider
- Easy mounting on all 3D magnetic sensor 2GO kits and Shield2Go
- First magnetic Linear evaluations within minutes
- Use case: linear movements
- Linear slider with magnet - flexible setup: adaptable air-gaps, two different magnetic strengths/materials & distance limiters
- Link to linear slider
- Easy mounting on all 3D magnetic sensor 2GO kits and Shield2Go
- First magnetic Linear evaluations within minutes
- Use case: linear movements
- Linear slider with magnet - flexible setup: adaptable air-gaps, two different magnetic strengths/materials & distance limiters
- Link to linear slider
- Easy Mountig on all 3D magnetic sensor 2GO kits and Shield2Go
- Use Case: Human-Machine-Interface (3x3 position matrix) for e.g. automotive direction indicator
- Magnetic direction indicator with magnet included in handle bar
- Link to direction indicator
- Easy Mountig on all 3D magnetic sensor 2GO kits and Shield2Go
- Use Case: Human-Machine-Interface (3x3 position matrix) for e.g. automotive direction indicator
- Magnetic direction indicator with magnet included in handle bar
- Link to direction indicator
- Easy Mountig on all 3D magnetic sensor 2GO kits and Shield2Go
- Use Case: Human-Machine-Interface (3x3 position matrix) for e.g. automotive direction indicator
- Magnetic direction indicator with magnet included in handle bar
- Link to direction indicator
- Easy mounting on all 3D magnetic sensor 2GO kits and Shield2Go
- Use Case: Control Trigger for e.g. Power Drill (Linear position measurements with 3D Hall sensor)
- Magnetic slider with magnet included
- Link to control trigger
- Easy mounting on all 3D magnetic sensor 2GO kits and Shield2Go
- Use Case: Control Trigger for e.g. Power Drill (Linear position measurements with 3D Hall sensor)
- Magnetic slider with magnet included
- Link to control trigger
- Easy mounting on all 3D magnetic sensor 2GO kits and Shield2Go
- Use Case: Control Trigger for e.g. Power Drill (Linear position measurements with 3D Hall sensor)
- Magnetic slider with magnet included
- Link to control trigger
- Easy mounting on all 3D magnetic sensor 2GO kits and Shield2Go
- Use case: Left/Rigth/Forward and Backward including 360° rotation at all positions
- Control element includes magnet
- Link to mini control
Please note: The MiniControl implements Infineon IP. Use of this Infineon IP is free of charge as long as only Infineon sensor products are used.
For a free-of-charge license, please contact systemlicensing@infineon.com. We are happy to help
- Easy mounting on all 3D magnetic sensor 2GO kits and Shield2Go
- Use case: Left/Rigth/Forward and Backward including 360° rotation at all positions
- Control element includes magnet
- Link to mini control
Please note: The MiniControl implements Infineon IP. Use of this Infineon IP is free of charge as long as only Infineon sensor products are used.
For a free-of-charge license, please contact systemlicensing@infineon.com. We are happy to help
- Easy mounting on all 3D magnetic sensor 2GO kits and Shield2Go
- Use case: Left/Rigth/Forward and Backward including 360° rotation at all positions
- Control element includes magnet
- Link to mini control
Please note: The MiniControl implements Infineon IP. Use of this Infineon IP is free of charge as long as only Infineon sensor products are used.
For a free-of-charge license, please contact systemlicensing@infineon.com. We are happy to help
XENSIV™ - Bluetooth® game controller featuring a unique gaming experience with XENSIV™, CAPSENSE™, SPIDER+ and PSoC™6 BLE technology.
- XENSIV™ 3D magnetic joysticks/triggers
- XENSIV™ magnetic switches
- CAPSENSE™ capacitive touch buttons
- SPIDER+ rumble driver
- PSoC™6 Bluetooth® LE microcontroller
XENSIV™ - Bluetooth® game controller featuring a unique gaming experience with XENSIV™, CAPSENSE™, SPIDER+ and PSoC™6 BLE technology.
- XENSIV™ 3D magnetic joysticks/triggers
- XENSIV™ magnetic switches
- CAPSENSE™ capacitive touch buttons
- SPIDER+ rumble driver
- PSoC™6 Bluetooth® LE microcontroller
XENSIV™ - Bluetooth® game controller featuring a unique gaming experience with XENSIV™, CAPSENSE™, SPIDER+ and PSoC™6 BLE technology.
- XENSIV™ 3D magnetic joysticks/triggers
- XENSIV™ magnetic switches
- CAPSENSE™ capacitive touch buttons
- SPIDER+ rumble driver
- PSoC™6 Bluetooth® LE microcontroller
Infineon’s S2GO_3D_TLE493D-W2B6-A0 boards offer a unique customer and evaluation experience – the boards are equipped with one TLE493D-W2B6 magnetic sensor and come with a ready to use Arduino library. Customers can now develop their own system solutions by combining Shield2Go boards together with Infineon My IoT adapters. My IoT adapters are gateways to external hardware solutions like Arduino and Raspberry PI, which are popular IoT evaluation platforms. All this enables the fastest evaluation and development of IoT system on the market.
Infineon’s S2GO_3D_TLE493D-W2B6-A0 boards offer a unique customer and evaluation experience – the boards are equipped with one TLE493D-W2B6 magnetic sensor and come with a ready to use Arduino library. Customers can now develop their own system solutions by combining Shield2Go boards together with Infineon My IoT adapters. My IoT adapters are gateways to external hardware solutions like Arduino and Raspberry PI, which are popular IoT evaluation platforms. All this enables the fastest evaluation and development of IoT system on the market.
Infineon’s S2GO_3D_TLE493D-W2B6-A0 boards offer a unique customer and evaluation experience – the boards are equipped with one TLE493D-W2B6 magnetic sensor and come with a ready to use Arduino library. Customers can now develop their own system solutions by combining Shield2Go boards together with Infineon My IoT adapters. My IoT adapters are gateways to external hardware solutions like Arduino and Raspberry PI, which are popular IoT evaluation platforms. All this enables the fastest evaluation and development of IoT system on the market.
Infineon’s S2GO_Hall_TLE4964-3M boards offer a unique customer and evaluation experience – the boards are equipped with one TLE4964-3M magnetic hall sensor and come with a ready to use Arduino library. Customers can now develop their own system solutions by combining Shield2Go boards together with Infineon My IoT adapters. My IoT adapters are gateways to external hardware solutions like Arduino and Raspberry PI, which are popular IoT evaluation platforms. All this enables the fastest evaluation and development of IoT system on the market!
Infineon’s S2GO_Hall_TLE4964-3M boards offer a unique customer and evaluation experience – the boards are equipped with one TLE4964-3M magnetic hall sensor and come with a ready to use Arduino library. Customers can now develop their own system solutions by combining Shield2Go boards together with Infineon My IoT adapters. My IoT adapters are gateways to external hardware solutions like Arduino and Raspberry PI, which are popular IoT evaluation platforms. All this enables the fastest evaluation and development of IoT system on the market!
Infineon’s S2GO_Hall_TLE4964-3M boards offer a unique customer and evaluation experience – the boards are equipped with one TLE4964-3M magnetic hall sensor and come with a ready to use Arduino library. Customers can now develop their own system solutions by combining Shield2Go boards together with Infineon My IoT adapters. My IoT adapters are gateways to external hardware solutions like Arduino and Raspberry PI, which are popular IoT evaluation platforms. All this enables the fastest evaluation and development of IoT system on the market!
Infineon’s S2GO_2_Hall_TLE4966K boards offer a unique customer and evaluation experience – the boards are equipped with one TLE4966K integrated circuit double Hall-effect sensor and come with a ready to use Arduino library. Customers can now develop their own system solutions by combining Shield2Go boards together with Infineon My IoT adapters. My IoT adapters are gateways to external hardware solutions like Arduino and Raspberry PI, which are popular IoT evaluation platforms. All this enables the fastest evaluation and development of IoT system on the market!
Infineon’s S2GO_2_Hall_TLE4966K boards offer a unique customer and evaluation experience – the boards are equipped with one TLE4966K integrated circuit double Hall-effect sensor and come with a ready to use Arduino library. Customers can now develop their own system solutions by combining Shield2Go boards together with Infineon My IoT adapters. My IoT adapters are gateways to external hardware solutions like Arduino and Raspberry PI, which are popular IoT evaluation platforms. All this enables the fastest evaluation and development of IoT system on the market!
Infineon’s S2GO_2_Hall_TLE4966K boards offer a unique customer and evaluation experience – the boards are equipped with one TLE4966K integrated circuit double Hall-effect sensor and come with a ready to use Arduino library. Customers can now develop their own system solutions by combining Shield2Go boards together with Infineon My IoT adapters. My IoT adapters are gateways to external hardware solutions like Arduino and Raspberry PI, which are popular IoT evaluation platforms. All this enables the fastest evaluation and development of IoT system on the market!
Infineon’s new XENSIVTM S2GO_3D_TLI493D-W2BW-A0 boards offer a unique customer and evaluation experience – the boards are equipped with one TLI493D-W2BW-A0 magnetic sensor and come with a ready to use Arduino library. Customers can now develop their own system solutions by combining Shield2Go boards together with Infineon My IoT adapters. My IoT adapters are gateways to external hardware solutions like Arduino and Raspberry PI, which are popular IoT evaluation platforms. All this enables the fastest evaluation and development of IoT system on the market! It can be used together with XMC2go platform (plugged on top as depicted below: the sensor is placed above the USB connector). The hardware can be also connected remotely to any 3.3V compatible development kit. Attention: Do not connect the shield directly to Arduino UNO platforms which are operating at 5V!
Infineon’s new XENSIVTM S2GO_3D_TLI493D-W2BW-A0 boards offer a unique customer and evaluation experience – the boards are equipped with one TLI493D-W2BW-A0 magnetic sensor and come with a ready to use Arduino library. Customers can now develop their own system solutions by combining Shield2Go boards together with Infineon My IoT adapters. My IoT adapters are gateways to external hardware solutions like Arduino and Raspberry PI, which are popular IoT evaluation platforms. All this enables the fastest evaluation and development of IoT system on the market! It can be used together with XMC2go platform (plugged on top as depicted below: the sensor is placed above the USB connector). The hardware can be also connected remotely to any 3.3V compatible development kit. Attention: Do not connect the shield directly to Arduino UNO platforms which are operating at 5V!
Infineon’s new XENSIVTM S2GO_3D_TLI493D-W2BW-A0 boards offer a unique customer and evaluation experience – the boards are equipped with one TLI493D-W2BW-A0 magnetic sensor and come with a ready to use Arduino library. Customers can now develop their own system solutions by combining Shield2Go boards together with Infineon My IoT adapters. My IoT adapters are gateways to external hardware solutions like Arduino and Raspberry PI, which are popular IoT evaluation platforms. All this enables the fastest evaluation and development of IoT system on the market! It can be used together with XMC2go platform (plugged on top as depicted below: the sensor is placed above the USB connector). The hardware can be also connected remotely to any 3.3V compatible development kit. Attention: Do not connect the shield directly to Arduino UNO platforms which are operating at 5V!
TLI4971 S2GO (Shield2Go) version consists of 3 main building blocks:
- Sensor board (top): Incorporating the TLI4971 industrial current sensor (equipped with M4 screw connectors for high current capabilities < 20A)
- Adapter board (Shield2Go format): The adapter board comes in the Shield2Go pinout and can be connected to the sensor board via the PCB edge connectors. It implements sensor application circuit & peripherals as well as pinout to the Infineon XMC 2Go MCU platform.
- Ziplock bag with: 2xM4 screws, 1 PCB edge connector (for connecting the sensor board to the adapter board in the Shield2Go formfactor), pin headers (male & female)
The TLI4971 S2GO does not offer programmability features, but all programming features can be explored by RAM settings.
TLI4971 S2GO (Shield2Go) version consists of 3 main building blocks:
- Sensor board (top): Incorporating the TLI4971 industrial current sensor (equipped with M4 screw connectors for high current capabilities < 20A)
- Adapter board (Shield2Go format): The adapter board comes in the Shield2Go pinout and can be connected to the sensor board via the PCB edge connectors. It implements sensor application circuit & peripherals as well as pinout to the Infineon XMC 2Go MCU platform.
- Ziplock bag with: 2xM4 screws, 1 PCB edge connector (for connecting the sensor board to the adapter board in the Shield2Go formfactor), pin headers (male & female)
The TLI4971 S2GO does not offer programmability features, but all programming features can be explored by RAM settings.
TLI4971 S2GO (Shield2Go) version consists of 3 main building blocks:
- Sensor board (top): Incorporating the TLI4971 industrial current sensor (equipped with M4 screw connectors for high current capabilities < 20A)
- Adapter board (Shield2Go format): The adapter board comes in the Shield2Go pinout and can be connected to the sensor board via the PCB edge connectors. It implements sensor application circuit & peripherals as well as pinout to the Infineon XMC 2Go MCU platform.
- Ziplock bag with: 2xM4 screws, 1 PCB edge connector (for connecting the sensor board to the adapter board in the Shield2Go formfactor), pin headers (male & female)
The TLI4971 S2GO does not offer programmability features, but all programming features can be explored by RAM settings.
Infineon’s S2Go_3DSense_TLV493D boards offer a unique customer and evaluation experience – the boards are equipped with one TLV493D-A1B6 magnetic sensor and come with a ready to use Arduino library. Customers can now develop their own system solutions by combining Shield2Go boards together with Infineon My IoT adapters. My IoT adapters are gateways to external hardware solutions like Arduino and Raspberry PI, which are popular IoT evaluation platforms. All this enables the fastest evaluation and development of IoT system on the market!
Infineon’s S2Go_3DSense_TLV493D boards offer a unique customer and evaluation experience – the boards are equipped with one TLV493D-A1B6 magnetic sensor and come with a ready to use Arduino library. Customers can now develop their own system solutions by combining Shield2Go boards together with Infineon My IoT adapters. My IoT adapters are gateways to external hardware solutions like Arduino and Raspberry PI, which are popular IoT evaluation platforms. All this enables the fastest evaluation and development of IoT system on the market!
Infineon’s S2Go_3DSense_TLV493D boards offer a unique customer and evaluation experience – the boards are equipped with one TLV493D-A1B6 magnetic sensor and come with a ready to use Arduino library. Customers can now develop their own system solutions by combining Shield2Go boards together with Infineon My IoT adapters. My IoT adapters are gateways to external hardware solutions like Arduino and Raspberry PI, which are popular IoT evaluation platforms. All this enables the fastest evaluation and development of IoT system on the market!
TLI4971 S2GO (Shield2Go) version consists of 3 main building blocks:
- Sensor board (top): Incorporating the TLI4971 industrial current sensor (equipped with M4 screw connectors for high current capabilities < 20A)
- Adapter board (Shield2Go format): The adapter board comes in the Shield2Go pinout and can be connected to the sensor board via the PCB edge connectors. It implements sensor application circuit & peripherals as well as pinout to the Infineon XMC 2Go MCU platform.
- Ziplock bag with: 2xM4 screws, 1 PCB edge connector (for connecting the sensor board to the adapter board in the Shield2Go formfactor), pin headers (male & female)
The TLI4971 S2GO does not offer programmability features, but all programming features can be explored by RAM settings.
TLI4971 S2GO (Shield2Go) version consists of 3 main building blocks:
- Sensor board (top): Incorporating the TLI4971 industrial current sensor (equipped with M4 screw connectors for high current capabilities < 20A)
- Adapter board (Shield2Go format): The adapter board comes in the Shield2Go pinout and can be connected to the sensor board via the PCB edge connectors. It implements sensor application circuit & peripherals as well as pinout to the Infineon XMC 2Go MCU platform.
- Ziplock bag with: 2xM4 screws, 1 PCB edge connector (for connecting the sensor board to the adapter board in the Shield2Go formfactor), pin headers (male & female)
The TLI4971 S2GO does not offer programmability features, but all programming features can be explored by RAM settings.
TLI4971 S2GO (Shield2Go) version consists of 3 main building blocks:
- Sensor board (top): Incorporating the TLI4971 industrial current sensor (equipped with M4 screw connectors for high current capabilities < 20A)
- Adapter board (Shield2Go format): The adapter board comes in the Shield2Go pinout and can be connected to the sensor board via the PCB edge connectors. It implements sensor application circuit & peripherals as well as pinout to the Infineon XMC 2Go MCU platform.
- Ziplock bag with: 2xM4 screws, 1 PCB edge connector (for connecting the sensor board to the adapter board in the Shield2Go formfactor), pin headers (male & female)
The TLI4971 S2GO does not offer programmability features, but all programming features can be explored by RAM settings.
Infineon’s Shield2Go boards offer a unique customer and evaluation experience – the boards are equipped with one DPS422 barometric pressure sensor and come with a ready to use Arduino library. Customers can now develop their own system solutions by combining Shield2Go boards together with Infineon My IoT adapters. My IoT adapters are gateways to external hardware solutions like Arduino and Raspberry PI, which are popular IoT hardware platforms. All this enables the fastest evaluation and development of IoT system.
Infineon’s Shield2Go boards offer a unique customer and evaluation experience – the boards are equipped with one DPS422 barometric pressure sensor and come with a ready to use Arduino library. Customers can now develop their own system solutions by combining Shield2Go boards together with Infineon My IoT adapters. My IoT adapters are gateways to external hardware solutions like Arduino and Raspberry PI, which are popular IoT hardware platforms. All this enables the fastest evaluation and development of IoT system.
Infineon’s Shield2Go boards offer a unique customer and evaluation experience – the boards are equipped with one DPS422 barometric pressure sensor and come with a ready to use Arduino library. Customers can now develop their own system solutions by combining Shield2Go boards together with Infineon My IoT adapters. My IoT adapters are gateways to external hardware solutions like Arduino and Raspberry PI, which are popular IoT hardware platforms. All this enables the fastest evaluation and development of IoT system.
Infineon’s Shield2Go boards offer a unique customer and evaluation experience – the boards are equipped with two High-performance digital MEMS Microphone IM69D130 and come with a ready to use Arduino library. Customers can now develop their own system solutions by combining Shield2Go boards together with Infineon My IoT adapters. My IoT adapters are gateways to external hardware solutions like Arduino and Raspberry PI, which are popular IoT hardware platforms. All this enables the fastest evaluation and development of IoT system.
Infineon’s Shield2Go boards offer a unique customer and evaluation experience – the boards are equipped with two High-performance digital MEMS Microphone IM69D130 and come with a ready to use Arduino library. Customers can now develop their own system solutions by combining Shield2Go boards together with Infineon My IoT adapters. My IoT adapters are gateways to external hardware solutions like Arduino and Raspberry PI, which are popular IoT hardware platforms. All this enables the fastest evaluation and development of IoT system.
Infineon’s Shield2Go boards offer a unique customer and evaluation experience – the boards are equipped with two High-performance digital MEMS Microphone IM69D130 and come with a ready to use Arduino library. Customers can now develop their own system solutions by combining Shield2Go boards together with Infineon My IoT adapters. My IoT adapters are gateways to external hardware solutions like Arduino and Raspberry PI, which are popular IoT hardware platforms. All this enables the fastest evaluation and development of IoT system.
Infineon’s Shield2Go boards offer a unique customer and evaluation experience – the boards are equipped with one Infineon IC and come with a ready to use Arduino library. Customers can now develop their own system solutions by combining Shield2Go boards together with Infineon My IoT adapters. My IoT adapters are gateways to external hardware solutions like Arduino and Raspberry PI, which are popular IoT hardware platforms. All this enables the fastest evaluation and development of IoT system.
Infineon’s Shield2Go boards offer a unique customer and evaluation experience – the boards are equipped with one Infineon IC and come with a ready to use Arduino library. Customers can now develop their own system solutions by combining Shield2Go boards together with Infineon My IoT adapters. My IoT adapters are gateways to external hardware solutions like Arduino and Raspberry PI, which are popular IoT hardware platforms. All this enables the fastest evaluation and development of IoT system.
Infineon’s Shield2Go boards offer a unique customer and evaluation experience – the boards are equipped with one Infineon IC and come with a ready to use Arduino library. Customers can now develop their own system solutions by combining Shield2Go boards together with Infineon My IoT adapters. My IoT adapters are gateways to external hardware solutions like Arduino and Raspberry PI, which are popular IoT hardware platforms. All this enables the fastest evaluation and development of IoT system.
Summary of features:
- Contactless magnetic based „4-bit DIP Switch“ for configuration using a magnetic 3D sensor for detection
- Four movable tiny magnets are used to configure a four bit value
Potential applications:
- Industrial
- Consumer
Complementary magnets:
Simply use our 3D printing files and start your 3D print.
Summary of features:
- Contactless magnetic based „4-bit DIP Switch“ for configuration using a magnetic 3D sensor for detection
- Four movable tiny magnets are used to configure a four bit value
Potential applications:
- Industrial
- Consumer
Complementary magnets:
Simply use our 3D printing files and start your 3D print.
Summary of features:
- Contactless magnetic based „4-bit DIP Switch“ for configuration using a magnetic 3D sensor for detection
- Four movable tiny magnets are used to configure a four bit value
Potential applications:
- Industrial
- Consumer
Complementary magnets:
Simply use our 3D printing files and start your 3D print.
The board may be programmed using the on-board J-Link debugger based on XMC4200 microcontroller, while the target is based on a XMC1100 Q24F64 ARM® Cortex™-M0 CPU. In addition, the board features our 3D magnetic sensor, TLI493D-W2BW used as reference magnetic probe for corelating magnetic switching points with magnetic field strength. The evaluation software is offered free for download, while the user may also reprogram the board with his own application firmware by using DAVE IDE. Mechanical wise, the board is compatible with the Out-Of-Shaft Mechanical Add-on, see add ons, which shall be ordered separately.
The Infineon TLE4966 magnetic sensor 2GO kit is equipped with:
- TLE4966V-1G: double vertical Hall latch with direction detection
- TLE4966G: double lateral Hall latch with direction detection
- XMC1100 (ARM® Cortex™-M0 based)
- On-board J-Link Lite Debugger (Realized with XMC4200 Microcontroller)
- Power over USB (Micro USB), ESD and reverse current protection
- GUI for free download
The board may be programmed using the on-board J-Link debugger based on XMC4200 microcontroller, while the target is based on a XMC1100 Q24F64 ARM® Cortex™-M0 CPU. In addition, the board features our 3D magnetic sensor, TLI493D-W2BW used as reference magnetic probe for corelating magnetic switching points with magnetic field strength. The evaluation software is offered free for download, while the user may also reprogram the board with his own application firmware by using DAVE IDE. Mechanical wise, the board is compatible with the Out-Of-Shaft Mechanical Add-on, see add ons, which shall be ordered separately.
The Infineon TLE4966 magnetic sensor 2GO kit is equipped with:
- TLE4966V-1G: double vertical Hall latch with direction detection
- TLE4966G: double lateral Hall latch with direction detection
- XMC1100 (ARM® Cortex™-M0 based)
- On-board J-Link Lite Debugger (Realized with XMC4200 Microcontroller)
- Power over USB (Micro USB), ESD and reverse current protection
- GUI for free download
The board may be programmed using the on-board J-Link debugger based on XMC4200 microcontroller, while the target is based on a XMC1100 Q24F64 ARM® Cortex™-M0 CPU. In addition, the board features our 3D magnetic sensor, TLI493D-W2BW used as reference magnetic probe for corelating magnetic switching points with magnetic field strength. The evaluation software is offered free for download, while the user may also reprogram the board with his own application firmware by using DAVE IDE. Mechanical wise, the board is compatible with the Out-Of-Shaft Mechanical Add-on, see add ons, which shall be ordered separately.
The Infineon TLE4966 magnetic sensor 2GO kit is equipped with:
- TLE4966V-1G: double vertical Hall latch with direction detection
- TLE4966G: double lateral Hall latch with direction detection
- XMC1100 (ARM® Cortex™-M0 based)
- On-board J-Link Lite Debugger (Realized with XMC4200 Microcontroller)
- Power over USB (Micro USB), ESD and reverse current protection
- GUI for free download
Infineon´s XENSIV™ TLx5012B magnetic angle sensor 2GO kit is a budget-priced entry level evaluation kit equipped with a TLE5012B /TLI5012B digital GMR angle sensor interfaced with an XMC1100 Infineon Microcontroller based on ARM Cortex M0 CPU. Build your own application and gadget with the Angle Sensor 2GO kits. The hardware & software bundle allows decoding and acquisition of all communication protocols, access to RAM registers and soft fusing of different variants.
The sensor is assembled in four different variants:
- TLE5012B E1000 version: automotive predefined variant with SSC & IIF communication protocols
- TLE5012B E5000 version: automotive predefined variant with SSC & PWM communication protocols
- TLE5012B E9000 version: automotive predefined variant with SSC & SPC communication protocols
- TLI5012B E1000 version: industrial predefined variant with SSC & IIF communication protocols
- XMC1100 (ARM® Cortex™-M0 based)
- On-board J-Link Lite Debugger (Realized with XMC4200 Microcontroller)
- Power over USB (Micro USB), ESD and reverse current protection
- GUI for free download
Infineon´s XENSIV™ TLx5012B magnetic angle sensor 2GO kit is a budget-priced entry level evaluation kit equipped with a TLE5012B /TLI5012B digital GMR angle sensor interfaced with an XMC1100 Infineon Microcontroller based on ARM Cortex M0 CPU. Build your own application and gadget with the Angle Sensor 2GO kits. The hardware & software bundle allows decoding and acquisition of all communication protocols, access to RAM registers and soft fusing of different variants.
The sensor is assembled in four different variants:
- TLE5012B E1000 version: automotive predefined variant with SSC & IIF communication protocols
- TLE5012B E5000 version: automotive predefined variant with SSC & PWM communication protocols
- TLE5012B E9000 version: automotive predefined variant with SSC & SPC communication protocols
- TLI5012B E1000 version: industrial predefined variant with SSC & IIF communication protocols
- XMC1100 (ARM® Cortex™-M0 based)
- On-board J-Link Lite Debugger (Realized with XMC4200 Microcontroller)
- Power over USB (Micro USB), ESD and reverse current protection
- GUI for free download
Infineon´s XENSIV™ TLx5012B magnetic angle sensor 2GO kit is a budget-priced entry level evaluation kit equipped with a TLE5012B /TLI5012B digital GMR angle sensor interfaced with an XMC1100 Infineon Microcontroller based on ARM Cortex M0 CPU. Build your own application and gadget with the Angle Sensor 2GO kits. The hardware & software bundle allows decoding and acquisition of all communication protocols, access to RAM registers and soft fusing of different variants.
The sensor is assembled in four different variants:
- TLE5012B E1000 version: automotive predefined variant with SSC & IIF communication protocols
- TLE5012B E5000 version: automotive predefined variant with SSC & PWM communication protocols
- TLE5012B E9000 version: automotive predefined variant with SSC & SPC communication protocols
- TLI5012B E1000 version: industrial predefined variant with SSC & IIF communication protocols
- XMC1100 (ARM® Cortex™-M0 based)
- On-board J-Link Lite Debugger (Realized with XMC4200 Microcontroller)
- Power over USB (Micro USB), ESD and reverse current protection
- GUI for free download
The 3D Magnetic Sensor 2GO kit is a budget-priced evaluation board equipped with a magnetic sensor for three dimensional measurement combined with an ARM® Cortex™-M0 CPU. It has a complete set of on-board devices, including an on-board debugger. In addition Infineon is offering so called add-on components which are adapters for the 3D Magnetic Sensor 2GO kits. Theses add ons (e.g. joysticks, rotation knobs, linear slider etc.) comprise a magnet and can be directly mounted onto the 2GO kits. Together with a dedicated GUI it’s the perfect tool for fast and easy plug-and-play systems. Build and evaluate your own application and gadget with the 3D Magnetic Sensor 2GO kit.
We offer three different derivatives, overview on derivatives:
- TLE493D-A2B6: automotive predefined variant, this variant is discontinued, please refer to TLE493D-W2B6 MS2GO
- TLE493D-W2B6: automotive predefined variant with wake up functionality (supports up to ASIL B)
- TLV493D-A1B6: consumer predefined variant
- XMC1100 (ARM® Cortex™-M0 based)
- On-board J-Link Lite Debugger (Realized with XMC4200 Microcontroller)
- Power over USB (Micro USB), ESD and reverse current protection
- GUI for free download
- Overview on product and nomenclature
The 3D Magnetic Sensor 2GO kit is a budget-priced evaluation board equipped with a magnetic sensor for three dimensional measurement combined with an ARM® Cortex™-M0 CPU. It has a complete set of on-board devices, including an on-board debugger. In addition Infineon is offering so called add-on components which are adapters for the 3D Magnetic Sensor 2GO kits. Theses add ons (e.g. joysticks, rotation knobs, linear slider etc.) comprise a magnet and can be directly mounted onto the 2GO kits. Together with a dedicated GUI it’s the perfect tool for fast and easy plug-and-play systems. Build and evaluate your own application and gadget with the 3D Magnetic Sensor 2GO kit.
We offer three different derivatives, overview on derivatives:
- TLE493D-A2B6: automotive predefined variant, this variant is discontinued, please refer to TLE493D-W2B6 MS2GO
- TLE493D-W2B6: automotive predefined variant with wake up functionality (supports up to ASIL B)
- TLV493D-A1B6: consumer predefined variant
- XMC1100 (ARM® Cortex™-M0 based)
- On-board J-Link Lite Debugger (Realized with XMC4200 Microcontroller)
- Power over USB (Micro USB), ESD and reverse current protection
- GUI for free download
- Overview on product and nomenclature
The 3D Magnetic Sensor 2GO kit is a budget-priced evaluation board equipped with a magnetic sensor for three dimensional measurement combined with an ARM® Cortex™-M0 CPU. It has a complete set of on-board devices, including an on-board debugger. In addition Infineon is offering so called add-on components which are adapters for the 3D Magnetic Sensor 2GO kits. Theses add ons (e.g. joysticks, rotation knobs, linear slider etc.) comprise a magnet and can be directly mounted onto the 2GO kits. Together with a dedicated GUI it’s the perfect tool for fast and easy plug-and-play systems. Build and evaluate your own application and gadget with the 3D Magnetic Sensor 2GO kit.
We offer three different derivatives, overview on derivatives:
- TLE493D-A2B6: automotive predefined variant, this variant is discontinued, please refer to TLE493D-W2B6 MS2GO
- TLE493D-W2B6: automotive predefined variant with wake up functionality (supports up to ASIL B)
- TLV493D-A1B6: consumer predefined variant
- XMC1100 (ARM® Cortex™-M0 based)
- On-board J-Link Lite Debugger (Realized with XMC4200 Microcontroller)
- Power over USB (Micro USB), ESD and reverse current protection
- GUI for free download
- Overview on product and nomenclature
TLI4971 S2GO (Shield2Go) version consists of 3 main building blocks: -Sensor board (top): Incorporating the TLI4971 industrial current sensor (equipped with M4 screw connectors for high current capabilities < 20A) -Adapter board (Shield2Go format): The adapter board comes in the Shield2Go pinout and can be connected to the sensor board via the PCB edge connectors. It implements sensor application circuit & peripherals as well as pinout to the Infineon XMC 2Go (link to XMC 2Go ) MCU platform. -Ziplock bag with: 2xM4 screws, 1 PCB edge connector (for connecting the sensor board to the adapter board in the Shield2Go formfactor), pin headers (male & female)
For evaluation purposes of the latest XENSIV™ current sensor TLI4971 we rely on our proven evaluation concept of Shield2Go and 2GO kits – therefore the TLI4971 evaluation environment is also offered in those two configurations:
- TLI4971 MS2GO: 2GO Kit version
Two typical configurations for the TLI4971 Shield2Go version - offering full flexibility:
- Shield2Go configuration: Connecting the sensor board to the adapter board with PCB edge connectors. The pinout corresponds to the Infineon XMC 2Go MCU platform. Please note that the XMC 2Go is not provided in the package. The programming can be done in the Arduino IDE by selecting the XMC 2Go platform.
- Standalone sensor board: The sensor board (top) can also be used as a standalone in any customer application (e.g. interfaced with customer MCU platforms, interfaced with lab equipment etc).
The TLI4971 S2GO does not offer programmability features, but all programming features can be explored by RAM settings.
TLI4971 S2GO (Shield2Go) version consists of 3 main building blocks: -Sensor board (top): Incorporating the TLI4971 industrial current sensor (equipped with M4 screw connectors for high current capabilities < 20A) -Adapter board (Shield2Go format): The adapter board comes in the Shield2Go pinout and can be connected to the sensor board via the PCB edge connectors. It implements sensor application circuit & peripherals as well as pinout to the Infineon XMC 2Go (link to XMC 2Go ) MCU platform. -Ziplock bag with: 2xM4 screws, 1 PCB edge connector (for connecting the sensor board to the adapter board in the Shield2Go formfactor), pin headers (male & female)
For evaluation purposes of the latest XENSIV™ current sensor TLI4971 we rely on our proven evaluation concept of Shield2Go and 2GO kits – therefore the TLI4971 evaluation environment is also offered in those two configurations:
- TLI4971 MS2GO: 2GO Kit version
Two typical configurations for the TLI4971 Shield2Go version - offering full flexibility:
- Shield2Go configuration: Connecting the sensor board to the adapter board with PCB edge connectors. The pinout corresponds to the Infineon XMC 2Go MCU platform. Please note that the XMC 2Go is not provided in the package. The programming can be done in the Arduino IDE by selecting the XMC 2Go platform.
- Standalone sensor board: The sensor board (top) can also be used as a standalone in any customer application (e.g. interfaced with customer MCU platforms, interfaced with lab equipment etc).
The TLI4971 S2GO does not offer programmability features, but all programming features can be explored by RAM settings.
TLI4971 S2GO (Shield2Go) version consists of 3 main building blocks: -Sensor board (top): Incorporating the TLI4971 industrial current sensor (equipped with M4 screw connectors for high current capabilities < 20A) -Adapter board (Shield2Go format): The adapter board comes in the Shield2Go pinout and can be connected to the sensor board via the PCB edge connectors. It implements sensor application circuit & peripherals as well as pinout to the Infineon XMC 2Go (link to XMC 2Go ) MCU platform. -Ziplock bag with: 2xM4 screws, 1 PCB edge connector (for connecting the sensor board to the adapter board in the Shield2Go formfactor), pin headers (male & female)
For evaluation purposes of the latest XENSIV™ current sensor TLI4971 we rely on our proven evaluation concept of Shield2Go and 2GO kits – therefore the TLI4971 evaluation environment is also offered in those two configurations:
- TLI4971 MS2GO: 2GO Kit version
Two typical configurations for the TLI4971 Shield2Go version - offering full flexibility:
- Shield2Go configuration: Connecting the sensor board to the adapter board with PCB edge connectors. The pinout corresponds to the Infineon XMC 2Go MCU platform. Please note that the XMC 2Go is not provided in the package. The programming can be done in the Arduino IDE by selecting the XMC 2Go platform.
- Standalone sensor board: The sensor board (top) can also be used as a standalone in any customer application (e.g. interfaced with customer MCU platforms, interfaced with lab equipment etc).
The TLI4971 S2GO does not offer programmability features, but all programming features can be explored by RAM settings.
TLI4971 S2GO (Shield2Go) version consists of 3 main building blocks: -Sensor board (top): Incorporating the TLI4971 industrial current sensor (equipped with M4 screw connectors for high current capabilities < 20A) -Adapter board (Shield2Go format): The adapter board comes in the Shield2Go pinout and can be connected to the sensor board via the PCB edge connectors. It implements sensor application circuit & peripherals as well as pinout to the Infineon XMC 2Go (link to XMC 2Go ) MCU platform. -Ziplock bag with: 2xM4 screws, 1 PCB edge connector (for connecting the sensor board to the adapter board in the Shield2Go formfactor), pin headers (male & female)
Our Infineon KP2xx automotive pressure 2GO kit is a budget-priced evaluation kit enabling the possibility to evaluate several derivatives of the Infineon KP2xx pressure sensor:
- KP215F1701 MAP: Analog Manifold Air Pressure Sensor
- KP229E3518 TurboMAP: Analog Turbo Manifold Air Pressure Sensor
- KP236 BAP: Analog Barometric Air Pressure
- KP254 dBAP: Digital Barometric Air Pressure (SPI)
The KP215, KP229 and KP236 variants provide an analog interface, the KP254 provides SPI and the KP275 provides SENT digital communication interface.
- Pressure and external temperature measurement - ONLY KP275dMAP
- CSV file can be generated for each derivative
- External NTC included, KP275-PS2GO-KIT
- Configuration of different transfer functions possible, KP215F1701-PS2GO-KIT and KP229E3518-PS2GO-KIT
- A pressure connector consisting of fast connector for 6mm tubes, pressure couple and sealing is included
- GUI software for free download
TLI4971 S2GO (Shield2Go) version consists of 3 main building blocks: -Sensor board (top): Incorporating the TLI4971 industrial current sensor (equipped with M4 screw connectors for high current capabilities < 20A) -Adapter board (Shield2Go format): The adapter board comes in the Shield2Go pinout and can be connected to the sensor board via the PCB edge connectors. It implements sensor application circuit & peripherals as well as pinout to the Infineon XMC 2Go (link to XMC 2Go ) MCU platform. -Ziplock bag with: 2xM4 screws, 1 PCB edge connector (for connecting the sensor board to the adapter board in the Shield2Go formfactor), pin headers (male & female)
Our Infineon KP2xx automotive pressure 2GO kit is a budget-priced evaluation kit enabling the possibility to evaluate several derivatives of the Infineon KP2xx pressure sensor:
- KP215F1701 MAP: Analog Manifold Air Pressure Sensor
- KP229E3518 TurboMAP: Analog Turbo Manifold Air Pressure Sensor
- KP236 BAP: Analog Barometric Air Pressure
- KP254 dBAP: Digital Barometric Air Pressure (SPI)
The KP215, KP229 and KP236 variants provide an analog interface, the KP254 provides SPI and the KP275 provides SENT digital communication interface.
- Pressure and external temperature measurement - ONLY KP275dMAP
- CSV file can be generated for each derivative
- External NTC included, KP275-PS2GO-KIT
- Configuration of different transfer functions possible, KP215F1701-PS2GO-KIT and KP229E3518-PS2GO-KIT
- A pressure connector consisting of fast connector for 6mm tubes, pressure couple and sealing is included
- GUI software for free download
TLI4971 S2GO (Shield2Go) version consists of 3 main building blocks: -Sensor board (top): Incorporating the TLI4971 industrial current sensor (equipped with M4 screw connectors for high current capabilities < 20A) -Adapter board (Shield2Go format): The adapter board comes in the Shield2Go pinout and can be connected to the sensor board via the PCB edge connectors. It implements sensor application circuit & peripherals as well as pinout to the Infineon XMC 2Go (link to XMC 2Go ) MCU platform. -Ziplock bag with: 2xM4 screws, 1 PCB edge connector (for connecting the sensor board to the adapter board in the Shield2Go formfactor), pin headers (male & female)
Our Infineon KP2xx automotive pressure 2GO kit is a budget-priced evaluation kit enabling the possibility to evaluate several derivatives of the Infineon KP2xx pressure sensor:
- KP215F1701 MAP: Analog Manifold Air Pressure Sensor
- KP229E3518 TurboMAP: Analog Turbo Manifold Air Pressure Sensor
- KP236 BAP: Analog Barometric Air Pressure
- KP254 dBAP: Digital Barometric Air Pressure (SPI)
The KP215, KP229 and KP236 variants provide an analog interface, the KP254 provides SPI and the KP275 provides SENT digital communication interface.
- Pressure and external temperature measurement - ONLY KP275dMAP
- CSV file can be generated for each derivative
- External NTC included, KP275-PS2GO-KIT
- Configuration of different transfer functions possible, KP215F1701-PS2GO-KIT and KP229E3518-PS2GO-KIT
- A pressure connector consisting of fast connector for 6mm tubes, pressure couple and sealing is included
- GUI software for free download
Infineon’s sensor 2GO kits are new budget-priced evaluation boards that are already equipped with a sensor combined with an ARM® Cortex®-M0 CPU. The sensor 2GO kits provide a complete set of on-board devices, including an on-board debugger. Build your own application and gadget with the sensor 2GO kits. Our 2GO kits are ready-to-use plug-and-play boards.
- Budget-priced evaluation board for speed sensing
- Complete speed sensor incl. back-bias magnet, fixing and cable
- TLE4922 (active mono cell Hall sensor)
- XMC1100 (ARM® Cortex™-M0 based)
- On-board J-Link Lite Debugger (Realized with XMC4200 microcontroller)
- Power over USB (Micro USB), ESD and reverse current protection
- GUI based tool for real in-application evaluation for free download
Infineon’s sensor 2GO kits are new budget-priced evaluation boards that are already equipped with a sensor combined with an ARM® Cortex®-M0 CPU. The sensor 2GO kits provide a complete set of on-board devices, including an on-board debugger. Build your own application and gadget with the sensor 2GO kits. Our 2GO kits are ready-to-use plug-and-play boards.
- Budget-priced evaluation board for speed sensing
- Complete speed sensor incl. back-bias magnet, fixing and cable
- TLE4922 (active mono cell Hall sensor)
- XMC1100 (ARM® Cortex™-M0 based)
- On-board J-Link Lite Debugger (Realized with XMC4200 microcontroller)
- Power over USB (Micro USB), ESD and reverse current protection
- GUI based tool for real in-application evaluation for free download
Infineon’s sensor 2GO kits are new budget-priced evaluation boards that are already equipped with a sensor combined with an ARM® Cortex®-M0 CPU. The sensor 2GO kits provide a complete set of on-board devices, including an on-board debugger. Build your own application and gadget with the sensor 2GO kits. Our 2GO kits are ready-to-use plug-and-play boards.
- Budget-priced evaluation board for speed sensing
- Complete speed sensor incl. back-bias magnet, fixing and cable
- TLE4922 (active mono cell Hall sensor)
- XMC1100 (ARM® Cortex™-M0 based)
- On-board J-Link Lite Debugger (Realized with XMC4200 microcontroller)
- Power over USB (Micro USB), ESD and reverse current protection
- GUI based tool for real in-application evaluation for free download
The board may be programmed using the on-board J-Link debugger based on XMC4200 microcontroller, while the target is based on a XMC1100 Q24F64 ARM® Cortex™-M0 CPU. In addition, the board features our 3D magnetic sensor, TLI493D-W2BW used as reference magnetic probe for corelating magnetic switching points with magnetic field strength. The evaluation software is offered free for download, while the user may also reprogram the board with his own application firmware by using DAVE IDE. Mechanical wise, the board is compatible with the Out-Of-Shaft Mechanical Add-on, see add ons, which shall be ordered separately.
The Infineon TLE4966 magnetic sensor 2GO kit is equipped with:
- TLE4966V-1G: double vertical Hall latch with direction detection
- TLE4966G: double lateral Hall latch with direction detection
- XMC1100 (ARM® Cortex™-M0 based)
- On-board J-Link Lite Debugger (Realized with XMC4200 Microcontroller)
- Power over USB (Micro USB), ESD and reverse current protection
- GUI for free download
The board may be programmed using the on-board J-Link debugger based on XMC4200 microcontroller, while the target is based on a XMC1100 Q24F64 ARM® Cortex™-M0 CPU. In addition, the board features our 3D magnetic sensor, TLI493D-W2BW used as reference magnetic probe for corelating magnetic switching points with magnetic field strength. The evaluation software is offered free for download, while the user may also reprogram the board with his own application firmware by using DAVE IDE. Mechanical wise, the board is compatible with the Out-Of-Shaft Mechanical Add-on, see add ons, which shall be ordered separately.
The Infineon TLE4966 magnetic sensor 2GO kit is equipped with:
- TLE4966V-1G: double vertical Hall latch with direction detection
- TLE4966G: double lateral Hall latch with direction detection
- XMC1100 (ARM® Cortex™-M0 based)
- On-board J-Link Lite Debugger (Realized with XMC4200 Microcontroller)
- Power over USB (Micro USB), ESD and reverse current protection
- GUI for free download
The board may be programmed using the on-board J-Link debugger based on XMC4200 microcontroller, while the target is based on a XMC1100 Q24F64 ARM® Cortex™-M0 CPU. In addition, the board features our 3D magnetic sensor, TLI493D-W2BW used as reference magnetic probe for corelating magnetic switching points with magnetic field strength. The evaluation software is offered free for download, while the user may also reprogram the board with his own application firmware by using DAVE IDE. Mechanical wise, the board is compatible with the Out-Of-Shaft Mechanical Add-on, see add ons, which shall be ordered separately.
The Infineon TLE4966 magnetic sensor 2GO kit is equipped with:
- TLE4966V-1G: double vertical Hall latch with direction detection
- TLE4966G: double lateral Hall latch with direction detection
- XMC1100 (ARM® Cortex™-M0 based)
- On-board J-Link Lite Debugger (Realized with XMC4200 Microcontroller)
- Power over USB (Micro USB), ESD and reverse current protection
- GUI for free download
Infineon´s XENSIV™ TLx5012B magnetic angle sensor 2GO kit is a budget-priced entry level evaluation kit equipped with a TLE5012B /TLI5012B digital GMR angle sensor interfaced with an XMC1100 Infineon Microcontroller based on ARM Cortex M0 CPU. Build your own application and gadget with the Angle Sensor 2GO kits. The hardware & software bundle allows decoding and acquisition of all communication protocols, access to RAM registers and soft fusing of different variants.
The sensor is assembled in four different variants:
- TLE5012B E1000 version: automotive predefined variant with SSC & IIF communication protocols
- TLE5012B E5000 version: automotive predefined variant with SSC & PWM communication protocols
- TLE5012B E9000 version: automotive predefined variant with SSC & SPC communication protocols
- TLI5012B E1000 version: industrial predefined variant with SSC & IIF communication protocols
- XMC1100 (ARM® Cortex™-M0 based)
- On-board J-Link Lite Debugger (Realized with XMC4200 Microcontroller)
- Power over USB (Micro USB), ESD and reverse current protection
- GUI for free download
Infineon´s XENSIV™ TLx5012B magnetic angle sensor 2GO kit is a budget-priced entry level evaluation kit equipped with a TLE5012B /TLI5012B digital GMR angle sensor interfaced with an XMC1100 Infineon Microcontroller based on ARM Cortex M0 CPU. Build your own application and gadget with the Angle Sensor 2GO kits. The hardware & software bundle allows decoding and acquisition of all communication protocols, access to RAM registers and soft fusing of different variants.
The sensor is assembled in four different variants:
- TLE5012B E1000 version: automotive predefined variant with SSC & IIF communication protocols
- TLE5012B E5000 version: automotive predefined variant with SSC & PWM communication protocols
- TLE5012B E9000 version: automotive predefined variant with SSC & SPC communication protocols
- TLI5012B E1000 version: industrial predefined variant with SSC & IIF communication protocols
- XMC1100 (ARM® Cortex™-M0 based)
- On-board J-Link Lite Debugger (Realized with XMC4200 Microcontroller)
- Power over USB (Micro USB), ESD and reverse current protection
- GUI for free download
Infineon´s XENSIV™ TLx5012B magnetic angle sensor 2GO kit is a budget-priced entry level evaluation kit equipped with a TLE5012B /TLI5012B digital GMR angle sensor interfaced with an XMC1100 Infineon Microcontroller based on ARM Cortex M0 CPU. Build your own application and gadget with the Angle Sensor 2GO kits. The hardware & software bundle allows decoding and acquisition of all communication protocols, access to RAM registers and soft fusing of different variants.
The sensor is assembled in four different variants:
- TLE5012B E1000 version: automotive predefined variant with SSC & IIF communication protocols
- TLE5012B E5000 version: automotive predefined variant with SSC & PWM communication protocols
- TLE5012B E9000 version: automotive predefined variant with SSC & SPC communication protocols
- TLI5012B E1000 version: industrial predefined variant with SSC & IIF communication protocols
- XMC1100 (ARM® Cortex™-M0 based)
- On-board J-Link Lite Debugger (Realized with XMC4200 Microcontroller)
- Power over USB (Micro USB), ESD and reverse current protection
- GUI for free download
The 3D Magnetic Sensor 2GO kit is a budget-priced evaluation board equipped with a magnetic sensor for three dimensional measurement combined with an ARM® Cortex™-M0 CPU. It has a complete set of on-board devices, including an on-board debugger. In addition Infineon is offering so called add-on components which are adapters for the 3D Magnetic Sensor 2GO kits. Theses add ons (e.g. joysticks, rotation knobs, linear slider etc.) comprise a magnet and can be directly mounted onto the 2GO kits. Together with a dedicated GUI it’s the perfect tool for fast and easy plug-and-play systems. Build and evaluate your own application and gadget with the 3D Magnetic Sensor 2GO kit.
We offer three different derivatives, overview on derivatives:
- TLE493D-A2B6: automotive predefined variant, this variant is discontinued, please refer to TLE493D-W2B6 MS2GO
- TLE493D-W2B6: automotive predefined variant with wake up functionality (supports up to ASIL B)
- TLV493D-A1B6: consumer predefined variant
- XMC1100 (ARM® Cortex™-M0 based)
- On-board J-Link Lite Debugger (Realized with XMC4200 Microcontroller)
- Power over USB (Micro USB), ESD and reverse current protection
- GUI for free download
- Overview on product and nomenclature
The 3D Magnetic Sensor 2GO kit is a budget-priced evaluation board equipped with a magnetic sensor for three dimensional measurement combined with an ARM® Cortex™-M0 CPU. It has a complete set of on-board devices, including an on-board debugger. In addition Infineon is offering so called add-on components which are adapters for the 3D Magnetic Sensor 2GO kits. Theses add ons (e.g. joysticks, rotation knobs, linear slider etc.) comprise a magnet and can be directly mounted onto the 2GO kits. Together with a dedicated GUI it’s the perfect tool for fast and easy plug-and-play systems. Build and evaluate your own application and gadget with the 3D Magnetic Sensor 2GO kit.
We offer three different derivatives, overview on derivatives:
- TLE493D-A2B6: automotive predefined variant, this variant is discontinued, please refer to TLE493D-W2B6 MS2GO
- TLE493D-W2B6: automotive predefined variant with wake up functionality (supports up to ASIL B)
- TLV493D-A1B6: consumer predefined variant
- XMC1100 (ARM® Cortex™-M0 based)
- On-board J-Link Lite Debugger (Realized with XMC4200 Microcontroller)
- Power over USB (Micro USB), ESD and reverse current protection
- GUI for free download
- Overview on product and nomenclature
The 3D Magnetic Sensor 2GO kit is a budget-priced evaluation board equipped with a magnetic sensor for three dimensional measurement combined with an ARM® Cortex™-M0 CPU. It has a complete set of on-board devices, including an on-board debugger. In addition Infineon is offering so called add-on components which are adapters for the 3D Magnetic Sensor 2GO kits. Theses add ons (e.g. joysticks, rotation knobs, linear slider etc.) comprise a magnet and can be directly mounted onto the 2GO kits. Together with a dedicated GUI it’s the perfect tool for fast and easy plug-and-play systems. Build and evaluate your own application and gadget with the 3D Magnetic Sensor 2GO kit.
We offer three different derivatives, overview on derivatives:
- TLE493D-A2B6: automotive predefined variant, this variant is discontinued, please refer to TLE493D-W2B6 MS2GO
- TLE493D-W2B6: automotive predefined variant with wake up functionality (supports up to ASIL B)
- TLV493D-A1B6: consumer predefined variant
- XMC1100 (ARM® Cortex™-M0 based)
- On-board J-Link Lite Debugger (Realized with XMC4200 Microcontroller)
- Power over USB (Micro USB), ESD and reverse current protection
- GUI for free download
- Overview on product and nomenclature
TLI4971 S2GO (Shield2Go) version consists of 3 main building blocks: -Sensor board (top): Incorporating the TLI4971 industrial current sensor (equipped with M4 screw connectors for high current capabilities < 20A) -Adapter board (Shield2Go format): The adapter board comes in the Shield2Go pinout and can be connected to the sensor board via the PCB edge connectors. It implements sensor application circuit & peripherals as well as pinout to the Infineon XMC 2Go (link to XMC 2Go ) MCU platform. -Ziplock bag with: 2xM4 screws, 1 PCB edge connector (for connecting the sensor board to the adapter board in the Shield2Go formfactor), pin headers (male & female)
For evaluation purposes of the latest XENSIV™ current sensor TLI4971 we rely on our proven evaluation concept of Shield2Go and 2GO kits – therefore the TLI4971 evaluation environment is also offered in those two configurations:
- TLI4971 MS2GO: 2GO Kit version
Two typical configurations for the TLI4971 Shield2Go version - offering full flexibility:
- Shield2Go configuration: Connecting the sensor board to the adapter board with PCB edge connectors. The pinout corresponds to the Infineon XMC 2Go MCU platform. Please note that the XMC 2Go is not provided in the package. The programming can be done in the Arduino IDE by selecting the XMC 2Go platform.
- Standalone sensor board: The sensor board (top) can also be used as a standalone in any customer application (e.g. interfaced with customer MCU platforms, interfaced with lab equipment etc).
The TLI4971 S2GO does not offer programmability features, but all programming features can be explored by RAM settings.
TLI4971 S2GO (Shield2Go) version consists of 3 main building blocks: -Sensor board (top): Incorporating the TLI4971 industrial current sensor (equipped with M4 screw connectors for high current capabilities < 20A) -Adapter board (Shield2Go format): The adapter board comes in the Shield2Go pinout and can be connected to the sensor board via the PCB edge connectors. It implements sensor application circuit & peripherals as well as pinout to the Infineon XMC 2Go (link to XMC 2Go ) MCU platform. -Ziplock bag with: 2xM4 screws, 1 PCB edge connector (for connecting the sensor board to the adapter board in the Shield2Go formfactor), pin headers (male & female)
For evaluation purposes of the latest XENSIV™ current sensor TLI4971 we rely on our proven evaluation concept of Shield2Go and 2GO kits – therefore the TLI4971 evaluation environment is also offered in those two configurations:
- TLI4971 MS2GO: 2GO Kit version
Two typical configurations for the TLI4971 Shield2Go version - offering full flexibility:
- Shield2Go configuration: Connecting the sensor board to the adapter board with PCB edge connectors. The pinout corresponds to the Infineon XMC 2Go MCU platform. Please note that the XMC 2Go is not provided in the package. The programming can be done in the Arduino IDE by selecting the XMC 2Go platform.
- Standalone sensor board: The sensor board (top) can also be used as a standalone in any customer application (e.g. interfaced with customer MCU platforms, interfaced with lab equipment etc).
The TLI4971 S2GO does not offer programmability features, but all programming features can be explored by RAM settings.
TLI4971 S2GO (Shield2Go) version consists of 3 main building blocks: -Sensor board (top): Incorporating the TLI4971 industrial current sensor (equipped with M4 screw connectors for high current capabilities < 20A) -Adapter board (Shield2Go format): The adapter board comes in the Shield2Go pinout and can be connected to the sensor board via the PCB edge connectors. It implements sensor application circuit & peripherals as well as pinout to the Infineon XMC 2Go (link to XMC 2Go ) MCU platform. -Ziplock bag with: 2xM4 screws, 1 PCB edge connector (for connecting the sensor board to the adapter board in the Shield2Go formfactor), pin headers (male & female)
For evaluation purposes of the latest XENSIV™ current sensor TLI4971 we rely on our proven evaluation concept of Shield2Go and 2GO kits – therefore the TLI4971 evaluation environment is also offered in those two configurations:
- TLI4971 MS2GO: 2GO Kit version
Two typical configurations for the TLI4971 Shield2Go version - offering full flexibility:
- Shield2Go configuration: Connecting the sensor board to the adapter board with PCB edge connectors. The pinout corresponds to the Infineon XMC 2Go MCU platform. Please note that the XMC 2Go is not provided in the package. The programming can be done in the Arduino IDE by selecting the XMC 2Go platform.
- Standalone sensor board: The sensor board (top) can also be used as a standalone in any customer application (e.g. interfaced with customer MCU platforms, interfaced with lab equipment etc).
The TLI4971 S2GO does not offer programmability features, but all programming features can be explored by RAM settings.
TLI4971 S2GO (Shield2Go) version consists of 3 main building blocks: -Sensor board (top): Incorporating the TLI4971 industrial current sensor (equipped with M4 screw connectors for high current capabilities < 20A) -Adapter board (Shield2Go format): The adapter board comes in the Shield2Go pinout and can be connected to the sensor board via the PCB edge connectors. It implements sensor application circuit & peripherals as well as pinout to the Infineon XMC 2Go (link to XMC 2Go ) MCU platform. -Ziplock bag with: 2xM4 screws, 1 PCB edge connector (for connecting the sensor board to the adapter board in the Shield2Go formfactor), pin headers (male & female)
Our Infineon KP2xx automotive pressure 2GO kit is a budget-priced evaluation kit enabling the possibility to evaluate several derivatives of the Infineon KP2xx pressure sensor:
- KP215F1701 MAP: Analog Manifold Air Pressure Sensor
- KP229E3518 TurboMAP: Analog Turbo Manifold Air Pressure Sensor
- KP236 BAP: Analog Barometric Air Pressure
- KP254 dBAP: Digital Barometric Air Pressure (SPI)
The KP215, KP229 and KP236 variants provide an analog interface, the KP254 provides SPI and the KP275 provides SENT digital communication interface.
- Pressure and external temperature measurement - ONLY KP275dMAP
- CSV file can be generated for each derivative
- External NTC included, KP275-PS2GO-KIT
- Configuration of different transfer functions possible, KP215F1701-PS2GO-KIT and KP229E3518-PS2GO-KIT
- A pressure connector consisting of fast connector for 6mm tubes, pressure couple and sealing is included
- GUI software for free download
TLI4971 S2GO (Shield2Go) version consists of 3 main building blocks: -Sensor board (top): Incorporating the TLI4971 industrial current sensor (equipped with M4 screw connectors for high current capabilities < 20A) -Adapter board (Shield2Go format): The adapter board comes in the Shield2Go pinout and can be connected to the sensor board via the PCB edge connectors. It implements sensor application circuit & peripherals as well as pinout to the Infineon XMC 2Go (link to XMC 2Go ) MCU platform. -Ziplock bag with: 2xM4 screws, 1 PCB edge connector (for connecting the sensor board to the adapter board in the Shield2Go formfactor), pin headers (male & female)
Our Infineon KP2xx automotive pressure 2GO kit is a budget-priced evaluation kit enabling the possibility to evaluate several derivatives of the Infineon KP2xx pressure sensor:
- KP215F1701 MAP: Analog Manifold Air Pressure Sensor
- KP229E3518 TurboMAP: Analog Turbo Manifold Air Pressure Sensor
- KP236 BAP: Analog Barometric Air Pressure
- KP254 dBAP: Digital Barometric Air Pressure (SPI)
The KP215, KP229 and KP236 variants provide an analog interface, the KP254 provides SPI and the KP275 provides SENT digital communication interface.
- Pressure and external temperature measurement - ONLY KP275dMAP
- CSV file can be generated for each derivative
- External NTC included, KP275-PS2GO-KIT
- Configuration of different transfer functions possible, KP215F1701-PS2GO-KIT and KP229E3518-PS2GO-KIT
- A pressure connector consisting of fast connector for 6mm tubes, pressure couple and sealing is included
- GUI software for free download
TLI4971 S2GO (Shield2Go) version consists of 3 main building blocks: -Sensor board (top): Incorporating the TLI4971 industrial current sensor (equipped with M4 screw connectors for high current capabilities < 20A) -Adapter board (Shield2Go format): The adapter board comes in the Shield2Go pinout and can be connected to the sensor board via the PCB edge connectors. It implements sensor application circuit & peripherals as well as pinout to the Infineon XMC 2Go (link to XMC 2Go ) MCU platform. -Ziplock bag with: 2xM4 screws, 1 PCB edge connector (for connecting the sensor board to the adapter board in the Shield2Go formfactor), pin headers (male & female)
Our Infineon KP2xx automotive pressure 2GO kit is a budget-priced evaluation kit enabling the possibility to evaluate several derivatives of the Infineon KP2xx pressure sensor:
- KP215F1701 MAP: Analog Manifold Air Pressure Sensor
- KP229E3518 TurboMAP: Analog Turbo Manifold Air Pressure Sensor
- KP236 BAP: Analog Barometric Air Pressure
- KP254 dBAP: Digital Barometric Air Pressure (SPI)
The KP215, KP229 and KP236 variants provide an analog interface, the KP254 provides SPI and the KP275 provides SENT digital communication interface.
- Pressure and external temperature measurement - ONLY KP275dMAP
- CSV file can be generated for each derivative
- External NTC included, KP275-PS2GO-KIT
- Configuration of different transfer functions possible, KP215F1701-PS2GO-KIT and KP229E3518-PS2GO-KIT
- A pressure connector consisting of fast connector for 6mm tubes, pressure couple and sealing is included
- GUI software for free download
Infineon’s sensor 2GO kits are new budget-priced evaluation boards that are already equipped with a sensor combined with an ARM® Cortex®-M0 CPU. The sensor 2GO kits provide a complete set of on-board devices, including an on-board debugger. Build your own application and gadget with the sensor 2GO kits. Our 2GO kits are ready-to-use plug-and-play boards.
- Budget-priced evaluation board for speed sensing
- Complete speed sensor incl. back-bias magnet, fixing and cable
- TLE4922 (active mono cell Hall sensor)
- XMC1100 (ARM® Cortex™-M0 based)
- On-board J-Link Lite Debugger (Realized with XMC4200 microcontroller)
- Power over USB (Micro USB), ESD and reverse current protection
- GUI based tool for real in-application evaluation for free download
Infineon’s sensor 2GO kits are new budget-priced evaluation boards that are already equipped with a sensor combined with an ARM® Cortex®-M0 CPU. The sensor 2GO kits provide a complete set of on-board devices, including an on-board debugger. Build your own application and gadget with the sensor 2GO kits. Our 2GO kits are ready-to-use plug-and-play boards.
- Budget-priced evaluation board for speed sensing
- Complete speed sensor incl. back-bias magnet, fixing and cable
- TLE4922 (active mono cell Hall sensor)
- XMC1100 (ARM® Cortex™-M0 based)
- On-board J-Link Lite Debugger (Realized with XMC4200 microcontroller)
- Power over USB (Micro USB), ESD and reverse current protection
- GUI based tool for real in-application evaluation for free download
Infineon’s sensor 2GO kits are new budget-priced evaluation boards that are already equipped with a sensor combined with an ARM® Cortex®-M0 CPU. The sensor 2GO kits provide a complete set of on-board devices, including an on-board debugger. Build your own application and gadget with the sensor 2GO kits. Our 2GO kits are ready-to-use plug-and-play boards.
- Budget-priced evaluation board for speed sensing
- Complete speed sensor incl. back-bias magnet, fixing and cable
- TLE4922 (active mono cell Hall sensor)
- XMC1100 (ARM® Cortex™-M0 based)
- On-board J-Link Lite Debugger (Realized with XMC4200 microcontroller)
- Power over USB (Micro USB), ESD and reverse current protection
- GUI based tool for real in-application evaluation for free download
The flex evaluation kit allows simple and easy evaluation of XENSIV™ MEMS microphone IM67D130. The flex board can be easily connected to audio testing setup. The evaluation kit includes five IM67D130 mounted on flex board and one adapter board
- Quick and easy evaluation of XENSIV™ MEMS microphones
- Flex dimensions: 25 x 4.5 mm
- Adapter dimensions: 20 x 15 mm
The flex evaluation kit allows simple and easy evaluation of XENSIV™ MEMS microphone IM67D130. The flex board can be easily connected to audio testing setup. The evaluation kit includes five IM67D130 mounted on flex board and one adapter board
- Quick and easy evaluation of XENSIV™ MEMS microphones
- Flex dimensions: 25 x 4.5 mm
- Adapter dimensions: 20 x 15 mm
The flex evaluation kit allows simple and easy evaluation of XENSIV™ MEMS microphone IM67D130. The flex board can be easily connected to audio testing setup. The evaluation kit includes five IM67D130 mounted on flex board and one adapter board
- Quick and easy evaluation of XENSIV™ MEMS microphones
- Flex dimensions: 25 x 4.5 mm
- Adapter dimensions: 20 x 15 mm
The flex evaluation kit allows simple and easy evaluation of XENSIV™ MEMS microphone IM67D120A. The flex board can be easily connected to audio testing setup. The evaluation kit includes five IM67D120A mounted on flex board and one adapter board.
- Quick and easy evaluation of XENSIV™ MEMS microphones
- Flex dimensions: 25 x 4.5 mm
- Adapter dimensions: 20 x 15 mm
The flex evaluation kit allows simple and easy evaluation of XENSIV™ MEMS microphone IM67D120A. The flex board can be easily connected to audio testing setup. The evaluation kit includes five IM67D120A mounted on flex board and one adapter board.
- Quick and easy evaluation of XENSIV™ MEMS microphones
- Flex dimensions: 25 x 4.5 mm
- Adapter dimensions: 20 x 15 mm
The flex evaluation kit allows simple and easy evaluation of XENSIV™ MEMS microphone IM67D120A. The flex board can be easily connected to audio testing setup. The evaluation kit includes five IM67D120A mounted on flex board and one adapter board.
- Quick and easy evaluation of XENSIV™ MEMS microphones
- Flex dimensions: 25 x 4.5 mm
- Adapter dimensions: 20 x 15 mm
The flex evaluation kit allows simple and easy evaluation of XENSIV™ MEMS microphone IM69D130. The flex board can be easily connected to audio testing setup. The evaluation kit includes five IM69D130 mounted on flex board and one adapter board.
- Quick and easy evaluation of XENSIV™ MEMS microphones
- Flex dimensions: 25 x 4.5 mm
- Adapter dimensions: 20 x 15 mm
The flex evaluation kit allows simple and easy evaluation of XENSIV™ MEMS microphone IM69D130. The flex board can be easily connected to audio testing setup. The evaluation kit includes five IM69D130 mounted on flex board and one adapter board.
- Quick and easy evaluation of XENSIV™ MEMS microphones
- Flex dimensions: 25 x 4.5 mm
- Adapter dimensions: 20 x 15 mm
The flex evaluation kit allows simple and easy evaluation of XENSIV™ MEMS microphone IM69D130. The flex board can be easily connected to audio testing setup. The evaluation kit includes five IM69D130 mounted on flex board and one adapter board.
- Quick and easy evaluation of XENSIV™ MEMS microphones
- Flex dimensions: 25 x 4.5 mm
- Adapter dimensions: 20 x 15 mm
Our XENSIVTM Spindle2Go can be mounted on 3D magnetic sensor Shield2Go. The ring magnet is included. Please note that the Shield2Go is not included, needs to be ordered separately.
Our XENSIVTM Spindle2Go can be mounted on 3D magnetic sensor Shield2Go. The ring magnet is included. Please note that the Shield2Go is not included, needs to be ordered separately.
Our XENSIVTM Spindle2Go can be mounted on 3D magnetic sensor Shield2Go. The ring magnet is included. Please note that the Shield2Go is not included, needs to be ordered separately.
Easy mounting on all 3D magnetic sensor 2GO kits and and Shield2Go
Linear movements and direction selection, combined with only one magnet
Easy mounting on all 3D magnetic sensor 2GO kits and and Shield2Go
Linear movements and direction selection, combined with only one magnet
Easy mounting on all 3D magnetic sensor 2GO kits and and Shield2Go
Linear movements and direction selection, combined with only one magnet
- Easy mouning on the Hall switch Shield2Go, TLE4963-3M, S2GO_HALL_TLE4964-3M
- Open & close detection with magnet for positions detection
- Presence and non-presence detection
- Link to OpenClose adapter
- Easy mouning on the Hall switch Shield2Go, TLE4963-3M, S2GO_HALL_TLE4964-3M
- Open & close detection with magnet for positions detection
- Presence and non-presence detection
- Link to OpenClose adapter
- Easy mouning on the Hall switch Shield2Go, TLE4963-3M, S2GO_HALL_TLE4964-3M
- Open & close detection with magnet for positions detection
- Presence and non-presence detection
- Link to OpenClose adapter
- Easy mounting on all 3D magnetic and angle sensor 2GO kits as well as 3D magnetic sensor Shield2Go
- Rotate knob with magnet as used in control elements and push buttons
- Use cases 3D magnetic sensors: rotational and vertical movements of control elements and push buttons
- Use cases angle sensors: simulates rotational movements for angle measurements
- Link to Rotate Knob 3D magnetic
- Link to Rotate Knob angle sensors
- Easy mounting on all 3D magnetic and angle sensor 2GO kits as well as 3D magnetic sensor Shield2Go
- Rotate knob with magnet as used in control elements and push buttons
- Use cases 3D magnetic sensors: rotational and vertical movements of control elements and push buttons
- Use cases angle sensors: simulates rotational movements for angle measurements
- Link to Rotate Knob 3D magnetic
- Link to Rotate Knob angle sensors
- Easy mounting on all 3D magnetic and angle sensor 2GO kits as well as 3D magnetic sensor Shield2Go
- Rotate knob with magnet as used in control elements and push buttons
- Use cases 3D magnetic sensors: rotational and vertical movements of control elements and push buttons
- Use cases angle sensors: simulates rotational movements for angle measurements
- Link to Rotate Knob 3D magnetic
- Link to Rotate Knob angle sensors
- Easy mounting on all 3D magnetic sensor 2GO kits and Shield2Go
- Use case: angle measurement in out of shaft configuration with 3D Hall sensor
- Three different out of shaft configurations possible (x-z, y-z and x-y axis)
- Magnetic rotation bar with ring magnet included
- Link to out of shaft adapter
- Easy mounting on all 3D magnetic sensor 2GO kits and Shield2Go
- Use case: angle measurement in out of shaft configuration with 3D Hall sensor
- Three different out of shaft configurations possible (x-z, y-z and x-y axis)
- Magnetic rotation bar with ring magnet included
- Link to out of shaft adapter
- Easy mounting on all 3D magnetic sensor 2GO kits and Shield2Go
- Use case: angle measurement in out of shaft configuration with 3D Hall sensor
- Three different out of shaft configurations possible (x-z, y-z and x-y axis)
- Magnetic rotation bar with ring magnet included
- Link to out of shaft adapter
- Easy mounting on all 3D magnetic sensor 2GO kits and Shield2Go
- First magnetic joystick measurements within minutes
- Link to joystick
- Easy mounting on all 3D magnetic sensor 2GO kits and Shield2Go
- First magnetic joystick measurements within minutes
- Link to joystick
- Easy mounting on all 3D magnetic sensor 2GO kits and Shield2Go
- First magnetic joystick measurements within minutes
- Link to joystick
- Easy mounting on all 3D magnetic sensor 2GO kits and Shield2Go
- First magnetic Linear evaluations within minutes
- Use case: linear movements
- Linear slider with magnet - flexible setup: adaptable air-gaps, two different magnetic strengths/materials & distance limiters
- Link to linear slider
- Easy mounting on all 3D magnetic sensor 2GO kits and Shield2Go
- First magnetic Linear evaluations within minutes
- Use case: linear movements
- Linear slider with magnet - flexible setup: adaptable air-gaps, two different magnetic strengths/materials & distance limiters
- Link to linear slider
- Easy mounting on all 3D magnetic sensor 2GO kits and Shield2Go
- First magnetic Linear evaluations within minutes
- Use case: linear movements
- Linear slider with magnet - flexible setup: adaptable air-gaps, two different magnetic strengths/materials & distance limiters
- Link to linear slider
- Easy Mountig on all 3D magnetic sensor 2GO kits and Shield2Go
- Use Case: Human-Machine-Interface (3x3 position matrix) for e.g. automotive direction indicator
- Magnetic direction indicator with magnet included in handle bar
- Link to direction indicator
- Easy Mountig on all 3D magnetic sensor 2GO kits and Shield2Go
- Use Case: Human-Machine-Interface (3x3 position matrix) for e.g. automotive direction indicator
- Magnetic direction indicator with magnet included in handle bar
- Link to direction indicator
- Easy Mountig on all 3D magnetic sensor 2GO kits and Shield2Go
- Use Case: Human-Machine-Interface (3x3 position matrix) for e.g. automotive direction indicator
- Magnetic direction indicator with magnet included in handle bar
- Link to direction indicator
- Easy mounting on all 3D magnetic sensor 2GO kits and Shield2Go
- Use Case: Control Trigger for e.g. Power Drill (Linear position measurements with 3D Hall sensor)
- Magnetic slider with magnet included
- Link to control trigger
- Easy mounting on all 3D magnetic sensor 2GO kits and Shield2Go
- Use Case: Control Trigger for e.g. Power Drill (Linear position measurements with 3D Hall sensor)
- Magnetic slider with magnet included
- Link to control trigger
- Easy mounting on all 3D magnetic sensor 2GO kits and Shield2Go
- Use Case: Control Trigger for e.g. Power Drill (Linear position measurements with 3D Hall sensor)
- Magnetic slider with magnet included
- Link to control trigger
- Easy mounting on all 3D magnetic sensor 2GO kits and Shield2Go
- Use case: Left/Rigth/Forward and Backward including 360° rotation at all positions
- Control element includes magnet
- Link to mini control
Please note: The MiniControl implements Infineon IP. Use of this Infineon IP is free of charge as long as only Infineon sensor products are used.
For a free-of-charge license, please contact systemlicensing@infineon.com. We are happy to help
- Easy mounting on all 3D magnetic sensor 2GO kits and Shield2Go
- Use case: Left/Rigth/Forward and Backward including 360° rotation at all positions
- Control element includes magnet
- Link to mini control
Please note: The MiniControl implements Infineon IP. Use of this Infineon IP is free of charge as long as only Infineon sensor products are used.
For a free-of-charge license, please contact systemlicensing@infineon.com. We are happy to help
- Easy mounting on all 3D magnetic sensor 2GO kits and Shield2Go
- Use case: Left/Rigth/Forward and Backward including 360° rotation at all positions
- Control element includes magnet
- Link to mini control
Please note: The MiniControl implements Infineon IP. Use of this Infineon IP is free of charge as long as only Infineon sensor products are used.
For a free-of-charge license, please contact systemlicensing@infineon.com. We are happy to help
XENSIV™ - Bluetooth® game controller featuring a unique gaming experience with XENSIV™, CAPSENSE™, SPIDER+ and PSoC™6 BLE technology.
- XENSIV™ 3D magnetic joysticks/triggers
- XENSIV™ magnetic switches
- CAPSENSE™ capacitive touch buttons
- SPIDER+ rumble driver
- PSoC™6 Bluetooth® LE microcontroller
XENSIV™ - Bluetooth® game controller featuring a unique gaming experience with XENSIV™, CAPSENSE™, SPIDER+ and PSoC™6 BLE technology.
- XENSIV™ 3D magnetic joysticks/triggers
- XENSIV™ magnetic switches
- CAPSENSE™ capacitive touch buttons
- SPIDER+ rumble driver
- PSoC™6 Bluetooth® LE microcontroller
XENSIV™ - Bluetooth® game controller featuring a unique gaming experience with XENSIV™, CAPSENSE™, SPIDER+ and PSoC™6 BLE technology.
- XENSIV™ 3D magnetic joysticks/triggers
- XENSIV™ magnetic switches
- CAPSENSE™ capacitive touch buttons
- SPIDER+ rumble driver
- PSoC™6 Bluetooth® LE microcontroller
Infineon’s S2GO_3D_TLE493D-W2B6-A0 boards offer a unique customer and evaluation experience – the boards are equipped with one TLE493D-W2B6 magnetic sensor and come with a ready to use Arduino library. Customers can now develop their own system solutions by combining Shield2Go boards together with Infineon My IoT adapters. My IoT adapters are gateways to external hardware solutions like Arduino and Raspberry PI, which are popular IoT evaluation platforms. All this enables the fastest evaluation and development of IoT system on the market.
Infineon’s S2GO_3D_TLE493D-W2B6-A0 boards offer a unique customer and evaluation experience – the boards are equipped with one TLE493D-W2B6 magnetic sensor and come with a ready to use Arduino library. Customers can now develop their own system solutions by combining Shield2Go boards together with Infineon My IoT adapters. My IoT adapters are gateways to external hardware solutions like Arduino and Raspberry PI, which are popular IoT evaluation platforms. All this enables the fastest evaluation and development of IoT system on the market.
Infineon’s S2GO_3D_TLE493D-W2B6-A0 boards offer a unique customer and evaluation experience – the boards are equipped with one TLE493D-W2B6 magnetic sensor and come with a ready to use Arduino library. Customers can now develop their own system solutions by combining Shield2Go boards together with Infineon My IoT adapters. My IoT adapters are gateways to external hardware solutions like Arduino and Raspberry PI, which are popular IoT evaluation platforms. All this enables the fastest evaluation and development of IoT system on the market.
Infineon’s S2GO_Hall_TLE4964-3M boards offer a unique customer and evaluation experience – the boards are equipped with one TLE4964-3M magnetic hall sensor and come with a ready to use Arduino library. Customers can now develop their own system solutions by combining Shield2Go boards together with Infineon My IoT adapters. My IoT adapters are gateways to external hardware solutions like Arduino and Raspberry PI, which are popular IoT evaluation platforms. All this enables the fastest evaluation and development of IoT system on the market!
Infineon’s S2GO_Hall_TLE4964-3M boards offer a unique customer and evaluation experience – the boards are equipped with one TLE4964-3M magnetic hall sensor and come with a ready to use Arduino library. Customers can now develop their own system solutions by combining Shield2Go boards together with Infineon My IoT adapters. My IoT adapters are gateways to external hardware solutions like Arduino and Raspberry PI, which are popular IoT evaluation platforms. All this enables the fastest evaluation and development of IoT system on the market!
Infineon’s S2GO_Hall_TLE4964-3M boards offer a unique customer and evaluation experience – the boards are equipped with one TLE4964-3M magnetic hall sensor and come with a ready to use Arduino library. Customers can now develop their own system solutions by combining Shield2Go boards together with Infineon My IoT adapters. My IoT adapters are gateways to external hardware solutions like Arduino and Raspberry PI, which are popular IoT evaluation platforms. All this enables the fastest evaluation and development of IoT system on the market!
Infineon’s S2GO_2_Hall_TLE4966K boards offer a unique customer and evaluation experience – the boards are equipped with one TLE4966K integrated circuit double Hall-effect sensor and come with a ready to use Arduino library. Customers can now develop their own system solutions by combining Shield2Go boards together with Infineon My IoT adapters. My IoT adapters are gateways to external hardware solutions like Arduino and Raspberry PI, which are popular IoT evaluation platforms. All this enables the fastest evaluation and development of IoT system on the market!
Infineon’s S2GO_2_Hall_TLE4966K boards offer a unique customer and evaluation experience – the boards are equipped with one TLE4966K integrated circuit double Hall-effect sensor and come with a ready to use Arduino library. Customers can now develop their own system solutions by combining Shield2Go boards together with Infineon My IoT adapters. My IoT adapters are gateways to external hardware solutions like Arduino and Raspberry PI, which are popular IoT evaluation platforms. All this enables the fastest evaluation and development of IoT system on the market!
Infineon’s S2GO_2_Hall_TLE4966K boards offer a unique customer and evaluation experience – the boards are equipped with one TLE4966K integrated circuit double Hall-effect sensor and come with a ready to use Arduino library. Customers can now develop their own system solutions by combining Shield2Go boards together with Infineon My IoT adapters. My IoT adapters are gateways to external hardware solutions like Arduino and Raspberry PI, which are popular IoT evaluation platforms. All this enables the fastest evaluation and development of IoT system on the market!
Infineon’s new XENSIVTM S2GO_3D_TLI493D-W2BW-A0 boards offer a unique customer and evaluation experience – the boards are equipped with one TLI493D-W2BW-A0 magnetic sensor and come with a ready to use Arduino library. Customers can now develop their own system solutions by combining Shield2Go boards together with Infineon My IoT adapters. My IoT adapters are gateways to external hardware solutions like Arduino and Raspberry PI, which are popular IoT evaluation platforms. All this enables the fastest evaluation and development of IoT system on the market! It can be used together with XMC2go platform (plugged on top as depicted below: the sensor is placed above the USB connector). The hardware can be also connected remotely to any 3.3V compatible development kit. Attention: Do not connect the shield directly to Arduino UNO platforms which are operating at 5V!
Infineon’s new XENSIVTM S2GO_3D_TLI493D-W2BW-A0 boards offer a unique customer and evaluation experience – the boards are equipped with one TLI493D-W2BW-A0 magnetic sensor and come with a ready to use Arduino library. Customers can now develop their own system solutions by combining Shield2Go boards together with Infineon My IoT adapters. My IoT adapters are gateways to external hardware solutions like Arduino and Raspberry PI, which are popular IoT evaluation platforms. All this enables the fastest evaluation and development of IoT system on the market! It can be used together with XMC2go platform (plugged on top as depicted below: the sensor is placed above the USB connector). The hardware can be also connected remotely to any 3.3V compatible development kit. Attention: Do not connect the shield directly to Arduino UNO platforms which are operating at 5V!
Infineon’s new XENSIVTM S2GO_3D_TLI493D-W2BW-A0 boards offer a unique customer and evaluation experience – the boards are equipped with one TLI493D-W2BW-A0 magnetic sensor and come with a ready to use Arduino library. Customers can now develop their own system solutions by combining Shield2Go boards together with Infineon My IoT adapters. My IoT adapters are gateways to external hardware solutions like Arduino and Raspberry PI, which are popular IoT evaluation platforms. All this enables the fastest evaluation and development of IoT system on the market! It can be used together with XMC2go platform (plugged on top as depicted below: the sensor is placed above the USB connector). The hardware can be also connected remotely to any 3.3V compatible development kit. Attention: Do not connect the shield directly to Arduino UNO platforms which are operating at 5V!
TLI4971 S2GO (Shield2Go) version consists of 3 main building blocks:
- Sensor board (top): Incorporating the TLI4971 industrial current sensor (equipped with M4 screw connectors for high current capabilities < 20A)
- Adapter board (Shield2Go format): The adapter board comes in the Shield2Go pinout and can be connected to the sensor board via the PCB edge connectors. It implements sensor application circuit & peripherals as well as pinout to the Infineon XMC 2Go MCU platform.
- Ziplock bag with: 2xM4 screws, 1 PCB edge connector (for connecting the sensor board to the adapter board in the Shield2Go formfactor), pin headers (male & female)
The TLI4971 S2GO does not offer programmability features, but all programming features can be explored by RAM settings.
TLI4971 S2GO (Shield2Go) version consists of 3 main building blocks:
- Sensor board (top): Incorporating the TLI4971 industrial current sensor (equipped with M4 screw connectors for high current capabilities < 20A)
- Adapter board (Shield2Go format): The adapter board comes in the Shield2Go pinout and can be connected to the sensor board via the PCB edge connectors. It implements sensor application circuit & peripherals as well as pinout to the Infineon XMC 2Go MCU platform.
- Ziplock bag with: 2xM4 screws, 1 PCB edge connector (for connecting the sensor board to the adapter board in the Shield2Go formfactor), pin headers (male & female)
The TLI4971 S2GO does not offer programmability features, but all programming features can be explored by RAM settings.
TLI4971 S2GO (Shield2Go) version consists of 3 main building blocks:
- Sensor board (top): Incorporating the TLI4971 industrial current sensor (equipped with M4 screw connectors for high current capabilities < 20A)
- Adapter board (Shield2Go format): The adapter board comes in the Shield2Go pinout and can be connected to the sensor board via the PCB edge connectors. It implements sensor application circuit & peripherals as well as pinout to the Infineon XMC 2Go MCU platform.
- Ziplock bag with: 2xM4 screws, 1 PCB edge connector (for connecting the sensor board to the adapter board in the Shield2Go formfactor), pin headers (male & female)
The TLI4971 S2GO does not offer programmability features, but all programming features can be explored by RAM settings.
Infineon’s S2Go_3DSense_TLV493D boards offer a unique customer and evaluation experience – the boards are equipped with one TLV493D-A1B6 magnetic sensor and come with a ready to use Arduino library. Customers can now develop their own system solutions by combining Shield2Go boards together with Infineon My IoT adapters. My IoT adapters are gateways to external hardware solutions like Arduino and Raspberry PI, which are popular IoT evaluation platforms. All this enables the fastest evaluation and development of IoT system on the market!
Infineon’s S2Go_3DSense_TLV493D boards offer a unique customer and evaluation experience – the boards are equipped with one TLV493D-A1B6 magnetic sensor and come with a ready to use Arduino library. Customers can now develop their own system solutions by combining Shield2Go boards together with Infineon My IoT adapters. My IoT adapters are gateways to external hardware solutions like Arduino and Raspberry PI, which are popular IoT evaluation platforms. All this enables the fastest evaluation and development of IoT system on the market!
Infineon’s S2Go_3DSense_TLV493D boards offer a unique customer and evaluation experience – the boards are equipped with one TLV493D-A1B6 magnetic sensor and come with a ready to use Arduino library. Customers can now develop their own system solutions by combining Shield2Go boards together with Infineon My IoT adapters. My IoT adapters are gateways to external hardware solutions like Arduino and Raspberry PI, which are popular IoT evaluation platforms. All this enables the fastest evaluation and development of IoT system on the market!
TLI4971 S2GO (Shield2Go) version consists of 3 main building blocks:
- Sensor board (top): Incorporating the TLI4971 industrial current sensor (equipped with M4 screw connectors for high current capabilities < 20A)
- Adapter board (Shield2Go format): The adapter board comes in the Shield2Go pinout and can be connected to the sensor board via the PCB edge connectors. It implements sensor application circuit & peripherals as well as pinout to the Infineon XMC 2Go MCU platform.
- Ziplock bag with: 2xM4 screws, 1 PCB edge connector (for connecting the sensor board to the adapter board in the Shield2Go formfactor), pin headers (male & female)
The TLI4971 S2GO does not offer programmability features, but all programming features can be explored by RAM settings.
TLI4971 S2GO (Shield2Go) version consists of 3 main building blocks:
- Sensor board (top): Incorporating the TLI4971 industrial current sensor (equipped with M4 screw connectors for high current capabilities < 20A)
- Adapter board (Shield2Go format): The adapter board comes in the Shield2Go pinout and can be connected to the sensor board via the PCB edge connectors. It implements sensor application circuit & peripherals as well as pinout to the Infineon XMC 2Go MCU platform.
- Ziplock bag with: 2xM4 screws, 1 PCB edge connector (for connecting the sensor board to the adapter board in the Shield2Go formfactor), pin headers (male & female)
The TLI4971 S2GO does not offer programmability features, but all programming features can be explored by RAM settings.
TLI4971 S2GO (Shield2Go) version consists of 3 main building blocks:
- Sensor board (top): Incorporating the TLI4971 industrial current sensor (equipped with M4 screw connectors for high current capabilities < 20A)
- Adapter board (Shield2Go format): The adapter board comes in the Shield2Go pinout and can be connected to the sensor board via the PCB edge connectors. It implements sensor application circuit & peripherals as well as pinout to the Infineon XMC 2Go MCU platform.
- Ziplock bag with: 2xM4 screws, 1 PCB edge connector (for connecting the sensor board to the adapter board in the Shield2Go formfactor), pin headers (male & female)
The TLI4971 S2GO does not offer programmability features, but all programming features can be explored by RAM settings.
Infineon’s Shield2Go boards offer a unique customer and evaluation experience – the boards are equipped with one DPS422 barometric pressure sensor and come with a ready to use Arduino library. Customers can now develop their own system solutions by combining Shield2Go boards together with Infineon My IoT adapters. My IoT adapters are gateways to external hardware solutions like Arduino and Raspberry PI, which are popular IoT hardware platforms. All this enables the fastest evaluation and development of IoT system.
Infineon’s Shield2Go boards offer a unique customer and evaluation experience – the boards are equipped with one DPS422 barometric pressure sensor and come with a ready to use Arduino library. Customers can now develop their own system solutions by combining Shield2Go boards together with Infineon My IoT adapters. My IoT adapters are gateways to external hardware solutions like Arduino and Raspberry PI, which are popular IoT hardware platforms. All this enables the fastest evaluation and development of IoT system.
Infineon’s Shield2Go boards offer a unique customer and evaluation experience – the boards are equipped with one DPS422 barometric pressure sensor and come with a ready to use Arduino library. Customers can now develop their own system solutions by combining Shield2Go boards together with Infineon My IoT adapters. My IoT adapters are gateways to external hardware solutions like Arduino and Raspberry PI, which are popular IoT hardware platforms. All this enables the fastest evaluation and development of IoT system.
Infineon’s Shield2Go boards offer a unique customer and evaluation experience – the boards are equipped with two High-performance digital MEMS Microphone IM69D130 and come with a ready to use Arduino library. Customers can now develop their own system solutions by combining Shield2Go boards together with Infineon My IoT adapters. My IoT adapters are gateways to external hardware solutions like Arduino and Raspberry PI, which are popular IoT hardware platforms. All this enables the fastest evaluation and development of IoT system.
Infineon’s Shield2Go boards offer a unique customer and evaluation experience – the boards are equipped with two High-performance digital MEMS Microphone IM69D130 and come with a ready to use Arduino library. Customers can now develop their own system solutions by combining Shield2Go boards together with Infineon My IoT adapters. My IoT adapters are gateways to external hardware solutions like Arduino and Raspberry PI, which are popular IoT hardware platforms. All this enables the fastest evaluation and development of IoT system.
Infineon’s Shield2Go boards offer a unique customer and evaluation experience – the boards are equipped with two High-performance digital MEMS Microphone IM69D130 and come with a ready to use Arduino library. Customers can now develop their own system solutions by combining Shield2Go boards together with Infineon My IoT adapters. My IoT adapters are gateways to external hardware solutions like Arduino and Raspberry PI, which are popular IoT hardware platforms. All this enables the fastest evaluation and development of IoT system.
Infineon’s Shield2Go boards offer a unique customer and evaluation experience – the boards are equipped with one Infineon IC and come with a ready to use Arduino library. Customers can now develop their own system solutions by combining Shield2Go boards together with Infineon My IoT adapters. My IoT adapters are gateways to external hardware solutions like Arduino and Raspberry PI, which are popular IoT hardware platforms. All this enables the fastest evaluation and development of IoT system.
Infineon’s Shield2Go boards offer a unique customer and evaluation experience – the boards are equipped with one Infineon IC and come with a ready to use Arduino library. Customers can now develop their own system solutions by combining Shield2Go boards together with Infineon My IoT adapters. My IoT adapters are gateways to external hardware solutions like Arduino and Raspberry PI, which are popular IoT hardware platforms. All this enables the fastest evaluation and development of IoT system.
Infineon’s Shield2Go boards offer a unique customer and evaluation experience – the boards are equipped with one Infineon IC and come with a ready to use Arduino library. Customers can now develop their own system solutions by combining Shield2Go boards together with Infineon My IoT adapters. My IoT adapters are gateways to external hardware solutions like Arduino and Raspberry PI, which are popular IoT hardware platforms. All this enables the fastest evaluation and development of IoT system.
Summary of features:
- Contactless magnetic based „4-bit DIP Switch“ for configuration using a magnetic 3D sensor for detection
- Four movable tiny magnets are used to configure a four bit value
Potential applications:
- Industrial
- Consumer
Complementary magnets:
Simply use our 3D printing files and start your 3D print.
Summary of features:
- Contactless magnetic based „4-bit DIP Switch“ for configuration using a magnetic 3D sensor for detection
- Four movable tiny magnets are used to configure a four bit value
Potential applications:
- Industrial
- Consumer
Complementary magnets:
Simply use our 3D printing files and start your 3D print.
Summary of features:
- Contactless magnetic based „4-bit DIP Switch“ for configuration using a magnetic 3D sensor for detection
- Four movable tiny magnets are used to configure a four bit value
Potential applications:
- Industrial
- Consumer
Complementary magnets:
Simply use our 3D printing files and start your 3D print.
The flex evaluation kit allows simple and easy evaluation of XENSIV™ MEMS microphone IM67D130. The flex board can be easily connected to audio testing setup. The evaluation kit includes five IM67D130 mounted on flex board and one adapter board
- Quick and easy evaluation of XENSIV™ MEMS microphones
- Flex dimensions: 25 x 4.5 mm
- Adapter dimensions: 20 x 15 mm
The flex evaluation kit allows simple and easy evaluation of XENSIV™ MEMS microphone IM67D130. The flex board can be easily connected to audio testing setup. The evaluation kit includes five IM67D130 mounted on flex board and one adapter board
- Quick and easy evaluation of XENSIV™ MEMS microphones
- Flex dimensions: 25 x 4.5 mm
- Adapter dimensions: 20 x 15 mm
The flex evaluation kit allows simple and easy evaluation of XENSIV™ MEMS microphone IM67D130. The flex board can be easily connected to audio testing setup. The evaluation kit includes five IM67D130 mounted on flex board and one adapter board
- Quick and easy evaluation of XENSIV™ MEMS microphones
- Flex dimensions: 25 x 4.5 mm
- Adapter dimensions: 20 x 15 mm
The flex evaluation kit allows simple and easy evaluation of XENSIV™ MEMS microphone IM67D120A. The flex board can be easily connected to audio testing setup. The evaluation kit includes five IM67D120A mounted on flex board and one adapter board.
- Quick and easy evaluation of XENSIV™ MEMS microphones
- Flex dimensions: 25 x 4.5 mm
- Adapter dimensions: 20 x 15 mm
The flex evaluation kit allows simple and easy evaluation of XENSIV™ MEMS microphone IM67D120A. The flex board can be easily connected to audio testing setup. The evaluation kit includes five IM67D120A mounted on flex board and one adapter board.
- Quick and easy evaluation of XENSIV™ MEMS microphones
- Flex dimensions: 25 x 4.5 mm
- Adapter dimensions: 20 x 15 mm
The flex evaluation kit allows simple and easy evaluation of XENSIV™ MEMS microphone IM67D120A. The flex board can be easily connected to audio testing setup. The evaluation kit includes five IM67D120A mounted on flex board and one adapter board.
- Quick and easy evaluation of XENSIV™ MEMS microphones
- Flex dimensions: 25 x 4.5 mm
- Adapter dimensions: 20 x 15 mm
The flex evaluation kit allows simple and easy evaluation of XENSIV™ MEMS microphone IM69D130. The flex board can be easily connected to audio testing setup. The evaluation kit includes five IM69D130 mounted on flex board and one adapter board.
- Quick and easy evaluation of XENSIV™ MEMS microphones
- Flex dimensions: 25 x 4.5 mm
- Adapter dimensions: 20 x 15 mm
The flex evaluation kit allows simple and easy evaluation of XENSIV™ MEMS microphone IM69D130. The flex board can be easily connected to audio testing setup. The evaluation kit includes five IM69D130 mounted on flex board and one adapter board.
- Quick and easy evaluation of XENSIV™ MEMS microphones
- Flex dimensions: 25 x 4.5 mm
- Adapter dimensions: 20 x 15 mm
The flex evaluation kit allows simple and easy evaluation of XENSIV™ MEMS microphone IM69D130. The flex board can be easily connected to audio testing setup. The evaluation kit includes five IM69D130 mounted on flex board and one adapter board.
- Quick and easy evaluation of XENSIV™ MEMS microphones
- Flex dimensions: 25 x 4.5 mm
- Adapter dimensions: 20 x 15 mm
Our XENSIVTM Spindle2Go can be mounted on 3D magnetic sensor Shield2Go. The ring magnet is included. Please note that the Shield2Go is not included, needs to be ordered separately.
Our XENSIVTM Spindle2Go can be mounted on 3D magnetic sensor Shield2Go. The ring magnet is included. Please note that the Shield2Go is not included, needs to be ordered separately.
Our XENSIVTM Spindle2Go can be mounted on 3D magnetic sensor Shield2Go. The ring magnet is included. Please note that the Shield2Go is not included, needs to be ordered separately.
Easy mounting on all 3D magnetic sensor 2GO kits and and Shield2Go
Linear movements and direction selection, combined with only one magnet
Easy mounting on all 3D magnetic sensor 2GO kits and and Shield2Go
Linear movements and direction selection, combined with only one magnet
Easy mounting on all 3D magnetic sensor 2GO kits and and Shield2Go
Linear movements and direction selection, combined with only one magnet
- Easy mouning on the Hall switch Shield2Go, TLE4963-3M, S2GO_HALL_TLE4964-3M
- Open & close detection with magnet for positions detection
- Presence and non-presence detection
- Link to OpenClose adapter
- Easy mouning on the Hall switch Shield2Go, TLE4963-3M, S2GO_HALL_TLE4964-3M
- Open & close detection with magnet for positions detection
- Presence and non-presence detection
- Link to OpenClose adapter
- Easy mouning on the Hall switch Shield2Go, TLE4963-3M, S2GO_HALL_TLE4964-3M
- Open & close detection with magnet for positions detection
- Presence and non-presence detection
- Link to OpenClose adapter
- Easy mounting on all 3D magnetic and angle sensor 2GO kits as well as 3D magnetic sensor Shield2Go
- Rotate knob with magnet as used in control elements and push buttons
- Use cases 3D magnetic sensors: rotational and vertical movements of control elements and push buttons
- Use cases angle sensors: simulates rotational movements for angle measurements
- Link to Rotate Knob 3D magnetic
- Link to Rotate Knob angle sensors
- Easy mounting on all 3D magnetic and angle sensor 2GO kits as well as 3D magnetic sensor Shield2Go
- Rotate knob with magnet as used in control elements and push buttons
- Use cases 3D magnetic sensors: rotational and vertical movements of control elements and push buttons
- Use cases angle sensors: simulates rotational movements for angle measurements
- Link to Rotate Knob 3D magnetic
- Link to Rotate Knob angle sensors
- Easy mounting on all 3D magnetic and angle sensor 2GO kits as well as 3D magnetic sensor Shield2Go
- Rotate knob with magnet as used in control elements and push buttons
- Use cases 3D magnetic sensors: rotational and vertical movements of control elements and push buttons
- Use cases angle sensors: simulates rotational movements for angle measurements
- Link to Rotate Knob 3D magnetic
- Link to Rotate Knob angle sensors
- Easy mounting on all 3D magnetic sensor 2GO kits and Shield2Go
- Use case: angle measurement in out of shaft configuration with 3D Hall sensor
- Three different out of shaft configurations possible (x-z, y-z and x-y axis)
- Magnetic rotation bar with ring magnet included
- Link to out of shaft adapter
- Easy mounting on all 3D magnetic sensor 2GO kits and Shield2Go
- Use case: angle measurement in out of shaft configuration with 3D Hall sensor
- Three different out of shaft configurations possible (x-z, y-z and x-y axis)
- Magnetic rotation bar with ring magnet included
- Link to out of shaft adapter
- Easy mounting on all 3D magnetic sensor 2GO kits and Shield2Go
- Use case: angle measurement in out of shaft configuration with 3D Hall sensor
- Three different out of shaft configurations possible (x-z, y-z and x-y axis)
- Magnetic rotation bar with ring magnet included
- Link to out of shaft adapter
- Easy mounting on all 3D magnetic sensor 2GO kits and Shield2Go
- First magnetic joystick measurements within minutes
- Link to joystick
- Easy mounting on all 3D magnetic sensor 2GO kits and Shield2Go
- First magnetic joystick measurements within minutes
- Link to joystick
- Easy mounting on all 3D magnetic sensor 2GO kits and Shield2Go
- First magnetic joystick measurements within minutes
- Link to joystick
- Easy mounting on all 3D magnetic sensor 2GO kits and Shield2Go
- First magnetic Linear evaluations within minutes
- Use case: linear movements
- Linear slider with magnet - flexible setup: adaptable air-gaps, two different magnetic strengths/materials & distance limiters
- Link to linear slider
- Easy mounting on all 3D magnetic sensor 2GO kits and Shield2Go
- First magnetic Linear evaluations within minutes
- Use case: linear movements
- Linear slider with magnet - flexible setup: adaptable air-gaps, two different magnetic strengths/materials & distance limiters
- Link to linear slider
- Easy mounting on all 3D magnetic sensor 2GO kits and Shield2Go
- First magnetic Linear evaluations within minutes
- Use case: linear movements
- Linear slider with magnet - flexible setup: adaptable air-gaps, two different magnetic strengths/materials & distance limiters
- Link to linear slider
- Easy Mountig on all 3D magnetic sensor 2GO kits and Shield2Go
- Use Case: Human-Machine-Interface (3x3 position matrix) for e.g. automotive direction indicator
- Magnetic direction indicator with magnet included in handle bar
- Link to direction indicator
- Easy Mountig on all 3D magnetic sensor 2GO kits and Shield2Go
- Use Case: Human-Machine-Interface (3x3 position matrix) for e.g. automotive direction indicator
- Magnetic direction indicator with magnet included in handle bar
- Link to direction indicator
- Easy Mountig on all 3D magnetic sensor 2GO kits and Shield2Go
- Use Case: Human-Machine-Interface (3x3 position matrix) for e.g. automotive direction indicator
- Magnetic direction indicator with magnet included in handle bar
- Link to direction indicator
- Easy mounting on all 3D magnetic sensor 2GO kits and Shield2Go
- Use Case: Control Trigger for e.g. Power Drill (Linear position measurements with 3D Hall sensor)
- Magnetic slider with magnet included
- Link to control trigger
- Easy mounting on all 3D magnetic sensor 2GO kits and Shield2Go
- Use Case: Control Trigger for e.g. Power Drill (Linear position measurements with 3D Hall sensor)
- Magnetic slider with magnet included
- Link to control trigger
- Easy mounting on all 3D magnetic sensor 2GO kits and Shield2Go
- Use Case: Control Trigger for e.g. Power Drill (Linear position measurements with 3D Hall sensor)
- Magnetic slider with magnet included
- Link to control trigger
- Easy mounting on all 3D magnetic sensor 2GO kits and Shield2Go
- Use case: Left/Rigth/Forward and Backward including 360° rotation at all positions
- Control element includes magnet
- Link to mini control
Please note: The MiniControl implements Infineon IP. Use of this Infineon IP is free of charge as long as only Infineon sensor products are used.
For a free-of-charge license, please contact systemlicensing@infineon.com. We are happy to help
- Easy mounting on all 3D magnetic sensor 2GO kits and Shield2Go
- Use case: Left/Rigth/Forward and Backward including 360° rotation at all positions
- Control element includes magnet
- Link to mini control
Please note: The MiniControl implements Infineon IP. Use of this Infineon IP is free of charge as long as only Infineon sensor products are used.
For a free-of-charge license, please contact systemlicensing@infineon.com. We are happy to help
- Easy mounting on all 3D magnetic sensor 2GO kits and Shield2Go
- Use case: Left/Rigth/Forward and Backward including 360° rotation at all positions
- Control element includes magnet
- Link to mini control
Please note: The MiniControl implements Infineon IP. Use of this Infineon IP is free of charge as long as only Infineon sensor products are used.
For a free-of-charge license, please contact systemlicensing@infineon.com. We are happy to help
XENSIV™ - Bluetooth® game controller featuring a unique gaming experience with XENSIV™, CAPSENSE™, SPIDER+ and PSoC™6 BLE technology.
- XENSIV™ 3D magnetic joysticks/triggers
- XENSIV™ magnetic switches
- CAPSENSE™ capacitive touch buttons
- SPIDER+ rumble driver
- PSoC™6 Bluetooth® LE microcontroller
XENSIV™ - Bluetooth® game controller featuring a unique gaming experience with XENSIV™, CAPSENSE™, SPIDER+ and PSoC™6 BLE technology.
- XENSIV™ 3D magnetic joysticks/triggers
- XENSIV™ magnetic switches
- CAPSENSE™ capacitive touch buttons
- SPIDER+ rumble driver
- PSoC™6 Bluetooth® LE microcontroller
XENSIV™ - Bluetooth® game controller featuring a unique gaming experience with XENSIV™, CAPSENSE™, SPIDER+ and PSoC™6 BLE technology.
- XENSIV™ 3D magnetic joysticks/triggers
- XENSIV™ magnetic switches
- CAPSENSE™ capacitive touch buttons
- SPIDER+ rumble driver
- PSoC™6 Bluetooth® LE microcontroller
Infineon’s S2GO_3D_TLE493D-W2B6-A0 boards offer a unique customer and evaluation experience – the boards are equipped with one TLE493D-W2B6 magnetic sensor and come with a ready to use Arduino library. Customers can now develop their own system solutions by combining Shield2Go boards together with Infineon My IoT adapters. My IoT adapters are gateways to external hardware solutions like Arduino and Raspberry PI, which are popular IoT evaluation platforms. All this enables the fastest evaluation and development of IoT system on the market.
Infineon’s S2GO_3D_TLE493D-W2B6-A0 boards offer a unique customer and evaluation experience – the boards are equipped with one TLE493D-W2B6 magnetic sensor and come with a ready to use Arduino library. Customers can now develop their own system solutions by combining Shield2Go boards together with Infineon My IoT adapters. My IoT adapters are gateways to external hardware solutions like Arduino and Raspberry PI, which are popular IoT evaluation platforms. All this enables the fastest evaluation and development of IoT system on the market.
Infineon’s S2GO_3D_TLE493D-W2B6-A0 boards offer a unique customer and evaluation experience – the boards are equipped with one TLE493D-W2B6 magnetic sensor and come with a ready to use Arduino library. Customers can now develop their own system solutions by combining Shield2Go boards together with Infineon My IoT adapters. My IoT adapters are gateways to external hardware solutions like Arduino and Raspberry PI, which are popular IoT evaluation platforms. All this enables the fastest evaluation and development of IoT system on the market.
Infineon’s S2GO_Hall_TLE4964-3M boards offer a unique customer and evaluation experience – the boards are equipped with one TLE4964-3M magnetic hall sensor and come with a ready to use Arduino library. Customers can now develop their own system solutions by combining Shield2Go boards together with Infineon My IoT adapters. My IoT adapters are gateways to external hardware solutions like Arduino and Raspberry PI, which are popular IoT evaluation platforms. All this enables the fastest evaluation and development of IoT system on the market!
Infineon’s S2GO_Hall_TLE4964-3M boards offer a unique customer and evaluation experience – the boards are equipped with one TLE4964-3M magnetic hall sensor and come with a ready to use Arduino library. Customers can now develop their own system solutions by combining Shield2Go boards together with Infineon My IoT adapters. My IoT adapters are gateways to external hardware solutions like Arduino and Raspberry PI, which are popular IoT evaluation platforms. All this enables the fastest evaluation and development of IoT system on the market!
Infineon’s S2GO_Hall_TLE4964-3M boards offer a unique customer and evaluation experience – the boards are equipped with one TLE4964-3M magnetic hall sensor and come with a ready to use Arduino library. Customers can now develop their own system solutions by combining Shield2Go boards together with Infineon My IoT adapters. My IoT adapters are gateways to external hardware solutions like Arduino and Raspberry PI, which are popular IoT evaluation platforms. All this enables the fastest evaluation and development of IoT system on the market!
Infineon’s S2GO_2_Hall_TLE4966K boards offer a unique customer and evaluation experience – the boards are equipped with one TLE4966K integrated circuit double Hall-effect sensor and come with a ready to use Arduino library. Customers can now develop their own system solutions by combining Shield2Go boards together with Infineon My IoT adapters. My IoT adapters are gateways to external hardware solutions like Arduino and Raspberry PI, which are popular IoT evaluation platforms. All this enables the fastest evaluation and development of IoT system on the market!
Infineon’s S2GO_2_Hall_TLE4966K boards offer a unique customer and evaluation experience – the boards are equipped with one TLE4966K integrated circuit double Hall-effect sensor and come with a ready to use Arduino library. Customers can now develop their own system solutions by combining Shield2Go boards together with Infineon My IoT adapters. My IoT adapters are gateways to external hardware solutions like Arduino and Raspberry PI, which are popular IoT evaluation platforms. All this enables the fastest evaluation and development of IoT system on the market!
Infineon’s S2GO_2_Hall_TLE4966K boards offer a unique customer and evaluation experience – the boards are equipped with one TLE4966K integrated circuit double Hall-effect sensor and come with a ready to use Arduino library. Customers can now develop their own system solutions by combining Shield2Go boards together with Infineon My IoT adapters. My IoT adapters are gateways to external hardware solutions like Arduino and Raspberry PI, which are popular IoT evaluation platforms. All this enables the fastest evaluation and development of IoT system on the market!
Infineon’s new XENSIVTM S2GO_3D_TLI493D-W2BW-A0 boards offer a unique customer and evaluation experience – the boards are equipped with one TLI493D-W2BW-A0 magnetic sensor and come with a ready to use Arduino library. Customers can now develop their own system solutions by combining Shield2Go boards together with Infineon My IoT adapters. My IoT adapters are gateways to external hardware solutions like Arduino and Raspberry PI, which are popular IoT evaluation platforms. All this enables the fastest evaluation and development of IoT system on the market! It can be used together with XMC2go platform (plugged on top as depicted below: the sensor is placed above the USB connector). The hardware can be also connected remotely to any 3.3V compatible development kit. Attention: Do not connect the shield directly to Arduino UNO platforms which are operating at 5V!
Infineon’s new XENSIVTM S2GO_3D_TLI493D-W2BW-A0 boards offer a unique customer and evaluation experience – the boards are equipped with one TLI493D-W2BW-A0 magnetic sensor and come with a ready to use Arduino library. Customers can now develop their own system solutions by combining Shield2Go boards together with Infineon My IoT adapters. My IoT adapters are gateways to external hardware solutions like Arduino and Raspberry PI, which are popular IoT evaluation platforms. All this enables the fastest evaluation and development of IoT system on the market! It can be used together with XMC2go platform (plugged on top as depicted below: the sensor is placed above the USB connector). The hardware can be also connected remotely to any 3.3V compatible development kit. Attention: Do not connect the shield directly to Arduino UNO platforms which are operating at 5V!
Infineon’s new XENSIVTM S2GO_3D_TLI493D-W2BW-A0 boards offer a unique customer and evaluation experience – the boards are equipped with one TLI493D-W2BW-A0 magnetic sensor and come with a ready to use Arduino library. Customers can now develop their own system solutions by combining Shield2Go boards together with Infineon My IoT adapters. My IoT adapters are gateways to external hardware solutions like Arduino and Raspberry PI, which are popular IoT evaluation platforms. All this enables the fastest evaluation and development of IoT system on the market! It can be used together with XMC2go platform (plugged on top as depicted below: the sensor is placed above the USB connector). The hardware can be also connected remotely to any 3.3V compatible development kit. Attention: Do not connect the shield directly to Arduino UNO platforms which are operating at 5V!
TLI4971 S2GO (Shield2Go) version consists of 3 main building blocks:
- Sensor board (top): Incorporating the TLI4971 industrial current sensor (equipped with M4 screw connectors for high current capabilities < 20A)
- Adapter board (Shield2Go format): The adapter board comes in the Shield2Go pinout and can be connected to the sensor board via the PCB edge connectors. It implements sensor application circuit & peripherals as well as pinout to the Infineon XMC 2Go MCU platform.
- Ziplock bag with: 2xM4 screws, 1 PCB edge connector (for connecting the sensor board to the adapter board in the Shield2Go formfactor), pin headers (male & female)
The TLI4971 S2GO does not offer programmability features, but all programming features can be explored by RAM settings.
TLI4971 S2GO (Shield2Go) version consists of 3 main building blocks:
- Sensor board (top): Incorporating the TLI4971 industrial current sensor (equipped with M4 screw connectors for high current capabilities < 20A)
- Adapter board (Shield2Go format): The adapter board comes in the Shield2Go pinout and can be connected to the sensor board via the PCB edge connectors. It implements sensor application circuit & peripherals as well as pinout to the Infineon XMC 2Go MCU platform.
- Ziplock bag with: 2xM4 screws, 1 PCB edge connector (for connecting the sensor board to the adapter board in the Shield2Go formfactor), pin headers (male & female)
The TLI4971 S2GO does not offer programmability features, but all programming features can be explored by RAM settings.
TLI4971 S2GO (Shield2Go) version consists of 3 main building blocks:
- Sensor board (top): Incorporating the TLI4971 industrial current sensor (equipped with M4 screw connectors for high current capabilities < 20A)
- Adapter board (Shield2Go format): The adapter board comes in the Shield2Go pinout and can be connected to the sensor board via the PCB edge connectors. It implements sensor application circuit & peripherals as well as pinout to the Infineon XMC 2Go MCU platform.
- Ziplock bag with: 2xM4 screws, 1 PCB edge connector (for connecting the sensor board to the adapter board in the Shield2Go formfactor), pin headers (male & female)
The TLI4971 S2GO does not offer programmability features, but all programming features can be explored by RAM settings.
Infineon’s S2Go_3DSense_TLV493D boards offer a unique customer and evaluation experience – the boards are equipped with one TLV493D-A1B6 magnetic sensor and come with a ready to use Arduino library. Customers can now develop their own system solutions by combining Shield2Go boards together with Infineon My IoT adapters. My IoT adapters are gateways to external hardware solutions like Arduino and Raspberry PI, which are popular IoT evaluation platforms. All this enables the fastest evaluation and development of IoT system on the market!
Infineon’s S2Go_3DSense_TLV493D boards offer a unique customer and evaluation experience – the boards are equipped with one TLV493D-A1B6 magnetic sensor and come with a ready to use Arduino library. Customers can now develop their own system solutions by combining Shield2Go boards together with Infineon My IoT adapters. My IoT adapters are gateways to external hardware solutions like Arduino and Raspberry PI, which are popular IoT evaluation platforms. All this enables the fastest evaluation and development of IoT system on the market!
Infineon’s S2Go_3DSense_TLV493D boards offer a unique customer and evaluation experience – the boards are equipped with one TLV493D-A1B6 magnetic sensor and come with a ready to use Arduino library. Customers can now develop their own system solutions by combining Shield2Go boards together with Infineon My IoT adapters. My IoT adapters are gateways to external hardware solutions like Arduino and Raspberry PI, which are popular IoT evaluation platforms. All this enables the fastest evaluation and development of IoT system on the market!
TLI4971 S2GO (Shield2Go) version consists of 3 main building blocks:
- Sensor board (top): Incorporating the TLI4971 industrial current sensor (equipped with M4 screw connectors for high current capabilities < 20A)
- Adapter board (Shield2Go format): The adapter board comes in the Shield2Go pinout and can be connected to the sensor board via the PCB edge connectors. It implements sensor application circuit & peripherals as well as pinout to the Infineon XMC 2Go MCU platform.
- Ziplock bag with: 2xM4 screws, 1 PCB edge connector (for connecting the sensor board to the adapter board in the Shield2Go formfactor), pin headers (male & female)
The TLI4971 S2GO does not offer programmability features, but all programming features can be explored by RAM settings.
TLI4971 S2GO (Shield2Go) version consists of 3 main building blocks:
- Sensor board (top): Incorporating the TLI4971 industrial current sensor (equipped with M4 screw connectors for high current capabilities < 20A)
- Adapter board (Shield2Go format): The adapter board comes in the Shield2Go pinout and can be connected to the sensor board via the PCB edge connectors. It implements sensor application circuit & peripherals as well as pinout to the Infineon XMC 2Go MCU platform.
- Ziplock bag with: 2xM4 screws, 1 PCB edge connector (for connecting the sensor board to the adapter board in the Shield2Go formfactor), pin headers (male & female)
The TLI4971 S2GO does not offer programmability features, but all programming features can be explored by RAM settings.
TLI4971 S2GO (Shield2Go) version consists of 3 main building blocks:
- Sensor board (top): Incorporating the TLI4971 industrial current sensor (equipped with M4 screw connectors for high current capabilities < 20A)
- Adapter board (Shield2Go format): The adapter board comes in the Shield2Go pinout and can be connected to the sensor board via the PCB edge connectors. It implements sensor application circuit & peripherals as well as pinout to the Infineon XMC 2Go MCU platform.
- Ziplock bag with: 2xM4 screws, 1 PCB edge connector (for connecting the sensor board to the adapter board in the Shield2Go formfactor), pin headers (male & female)
The TLI4971 S2GO does not offer programmability features, but all programming features can be explored by RAM settings.
Infineon’s Shield2Go boards offer a unique customer and evaluation experience – the boards are equipped with one DPS422 barometric pressure sensor and come with a ready to use Arduino library. Customers can now develop their own system solutions by combining Shield2Go boards together with Infineon My IoT adapters. My IoT adapters are gateways to external hardware solutions like Arduino and Raspberry PI, which are popular IoT hardware platforms. All this enables the fastest evaluation and development of IoT system.
Infineon’s Shield2Go boards offer a unique customer and evaluation experience – the boards are equipped with one DPS422 barometric pressure sensor and come with a ready to use Arduino library. Customers can now develop their own system solutions by combining Shield2Go boards together with Infineon My IoT adapters. My IoT adapters are gateways to external hardware solutions like Arduino and Raspberry PI, which are popular IoT hardware platforms. All this enables the fastest evaluation and development of IoT system.
Infineon’s Shield2Go boards offer a unique customer and evaluation experience – the boards are equipped with one DPS422 barometric pressure sensor and come with a ready to use Arduino library. Customers can now develop their own system solutions by combining Shield2Go boards together with Infineon My IoT adapters. My IoT adapters are gateways to external hardware solutions like Arduino and Raspberry PI, which are popular IoT hardware platforms. All this enables the fastest evaluation and development of IoT system.
Infineon’s Shield2Go boards offer a unique customer and evaluation experience – the boards are equipped with two High-performance digital MEMS Microphone IM69D130 and come with a ready to use Arduino library. Customers can now develop their own system solutions by combining Shield2Go boards together with Infineon My IoT adapters. My IoT adapters are gateways to external hardware solutions like Arduino and Raspberry PI, which are popular IoT hardware platforms. All this enables the fastest evaluation and development of IoT system.
Infineon’s Shield2Go boards offer a unique customer and evaluation experience – the boards are equipped with two High-performance digital MEMS Microphone IM69D130 and come with a ready to use Arduino library. Customers can now develop their own system solutions by combining Shield2Go boards together with Infineon My IoT adapters. My IoT adapters are gateways to external hardware solutions like Arduino and Raspberry PI, which are popular IoT hardware platforms. All this enables the fastest evaluation and development of IoT system.
Infineon’s Shield2Go boards offer a unique customer and evaluation experience – the boards are equipped with two High-performance digital MEMS Microphone IM69D130 and come with a ready to use Arduino library. Customers can now develop their own system solutions by combining Shield2Go boards together with Infineon My IoT adapters. My IoT adapters are gateways to external hardware solutions like Arduino and Raspberry PI, which are popular IoT hardware platforms. All this enables the fastest evaluation and development of IoT system.
Infineon’s Shield2Go boards offer a unique customer and evaluation experience – the boards are equipped with one Infineon IC and come with a ready to use Arduino library. Customers can now develop their own system solutions by combining Shield2Go boards together with Infineon My IoT adapters. My IoT adapters are gateways to external hardware solutions like Arduino and Raspberry PI, which are popular IoT hardware platforms. All this enables the fastest evaluation and development of IoT system.
Infineon’s Shield2Go boards offer a unique customer and evaluation experience – the boards are equipped with one Infineon IC and come with a ready to use Arduino library. Customers can now develop their own system solutions by combining Shield2Go boards together with Infineon My IoT adapters. My IoT adapters are gateways to external hardware solutions like Arduino and Raspberry PI, which are popular IoT hardware platforms. All this enables the fastest evaluation and development of IoT system.
Infineon’s Shield2Go boards offer a unique customer and evaluation experience – the boards are equipped with one Infineon IC and come with a ready to use Arduino library. Customers can now develop their own system solutions by combining Shield2Go boards together with Infineon My IoT adapters. My IoT adapters are gateways to external hardware solutions like Arduino and Raspberry PI, which are popular IoT hardware platforms. All this enables the fastest evaluation and development of IoT system.
Summary of features:
- Contactless magnetic based „4-bit DIP Switch“ for configuration using a magnetic 3D sensor for detection
- Four movable tiny magnets are used to configure a four bit value
Potential applications:
- Industrial
- Consumer
Complementary magnets:
Simply use our 3D printing files and start your 3D print.
Summary of features:
- Contactless magnetic based „4-bit DIP Switch“ for configuration using a magnetic 3D sensor for detection
- Four movable tiny magnets are used to configure a four bit value
Potential applications:
- Industrial
- Consumer
Complementary magnets:
Simply use our 3D printing files and start your 3D print.
Summary of features:
- Contactless magnetic based „4-bit DIP Switch“ for configuration using a magnetic 3D sensor for detection
- Four movable tiny magnets are used to configure a four bit value
Potential applications:
- Industrial
- Consumer
Complementary magnets:
Simply use our 3D printing files and start your 3D print.