EZ-USB™ SX3 FIFO to USB 5 Gbps Peripheral Controller
USB 5 Gbps easily configured for UVC/UAC or USB3 vision applications
Infineon's EZ-USB™ SX3 can be configured with an abundance parameter setting in an easy-to-use Graphic User Interface (GUI), which can customize VID/PID, product strings, serial numbers, FIFO settings, GPIOs, USB endpoints and auxiliary interface. The utility can also create spec-compliant USB Video Class (UVC) and USB Audio Class (UAC) configurations without firmware development, reducing time-to-market for your next product. In addition to the configurable parameters, developers can also utilize the integrated 32-bit ARM9 processor to perform other tasks to differentiate in the market.
Infineon also offers a rich portfolio of USB Type-C port controllers that can be used with the EZ-USB™ SX3 to add USB-C and USB Power Delivery features to cameras, video capturing, or other data acquisition applications.
Universal Serial Bus (USB) integration
- USB 3.2, Gen 1 and USB 2.0 peripherals compliant with USB 3.2 specification revision 1.0
- 5 Gbps SuperSpeed PHY compliant with USB 3.2 Gen 1
- Three physical endpoints
- Supports UVC, UAC, and USB vendor class protocol
General Configurable Interface
- Support up to 100 MHz
- 8-, 16-, 24-, and 32 bit data bus
- Supports Slave FIFO, parallel camera interface
32 bit CPU
- ARM926EJ core with 200 MHz operation
- 512 KB embedded SRAM
Additional connectivity to the following peripherals
- SPI boot flash
- I²C slaves at 100 kHz / 400 kHz / 1 MHz
Selectable clock input frequencies
- 2, 26, 38.4, and 52 MHz
- 2 MHz crystal input support
Ultra-low-power in core power-down mode
- Less than 60 µA with VBATT on and 20 µA with VBATT off
Independent power domains for core and I/O
- Core operation at 1.2 V
- SPI operation at 1.8 V to 3.3 V
- I²C operation at 1.2 V to 3.3 V
Package options
- 121-ball, 10-mm, 10-mm, 0.8-mm pitch Pb-free ball grid array (BGA)
EZ-USB™ SX3 configuration utility for configuration of SX3
- Works on Windows, macOS, Linux
- Example configurations for image sensor, HDMI receiver and data applications
- Supports programming of SX3 and configures the FPGA
- Supports merging of FPGA configuration with SX3 configuration and storing in a single SPI flash
- Lowest total cost (bandwidth per dollar) solution for any high-speed system
- Quick time-to-market with low development costs
- Turn-key solutions on industrial standards
