Active and preferred
RoHS Compliant
Lead-free

BGT24LTR22

XENSIV™ 24GHz multichannel radar sensor BGT24LTR22 for distance and angle measurement
Data Sheet
package
board
software

Content could not be loaded

Unfortunately, we were unable to load the content for this section. You may want to refresh the page or try again later.

BGT24LTR22
BGT24LTR22
Data Sheet

Product details

  • Angle of Arrival
    yes
  • Antenna
    External
  • Current Consumption
    170 mA
  • Direction of Motion
    Yes
  • Family
    XENSIV™ 24GHz Radar Sensors
  • Frequency
    24 GHz to 24.25 GHz
  • Gain
    25 dB
  • Max Detection Range
    20 m
  • Min Detection Range
    0.5 m
  • Motion
    yes
  • NF
    8 dB
  • Number of Rx Antennas
    2
  • Number of Tx Antennas
    2
  • Qualification
    Industrial (JEDEC20/22)
  • Range
    yes
  • Speed [m/s]
    yes
  • Supply Voltage
    1.5 V
  • Target Application
    HVAC, Security systems, Street lighting, Robotics collision avoidance, Traffic monitoring, People tracking, Drone obstacle avoidance, Drone landing assist
  • Temperature Range
    -40 to + 85°C
Recommended
OPN
BGT24LTR22E6327XTSA1
Product Status active and preferred
Infineon Package
PG-WFWLB-52
Package Name N/A
Packing Size 2000
Packing Type TAPE & REEL
Moisture Level 1
Moisture Packing NON DRY
Lead-free Yes
Halogen Free Yes
RoHS Compliant Yes
Infineon stock last updated:

Product Status
Active
Infineon Package
PG-WFWLB-52
Package Name -
Packing Size 2000
Packing Type TAPE & REEL
Moisture Level 1
Moisture Packing NON DRY
Lead Free
Halogen Free
RoHS Compliant
The BGT24LTR22 is a low-power, low-noise multichannel Silicon Germanium transceiver MMIC designed for 24 GHz radar applications. This device provides building blocks for analog signal generation and reception, supporting multiple modulation schemes, including FMCW and Doppler. With its high performance and flexibility, the BGT24LTR22 is well-suited for a variety of radar applications.

Features

  • 24GHz transceiver MMIC
  • Fully integrated low phase noise VCO
  • Integrated baseband amplifiers (can be bypassed)
  • Small footprint 3.6 x 3.6 mm²
  • Bidirectional transmitter pin for synchronization of multiple chips
  • Built in temperature compensation circuit for VCO stabilization
  • Low power consumption
  • Fully ESD protected device
  • Single ended RF and IF terminals
  • Single supply voltage 1.5 V

Documents

Documents

Design resources

Partner solutions

Developer community

{ "ctalist":[ { "link" : "https://community.infineon.com/t5/forums/postpage/choose-node/true", "label" : "Ask the community", "labelEn" : "Ask the community" }, { "link" : "https://community.infineon.com/t5/Forums/ct-p/products", "label" : "View all discussions", "labelEn" : "View all discussions" } ] }