Active and preferred
RoHS Compliant

DEMO_IMR_BMSPWR_V1

Demo board for BMS power, utilized in Infineon Mobile Robot (IMR)
User Manual
board
ea.
in stock

Content could not be loaded

Unfortunately, we were unable to load the content for this section. You may want to refresh the page or try again later.

DEMO_IMR_BMSPWR_V1
DEMO_IMR_BMSPWR_V1
ea.
User Manual

Product details

  • Board Type
    Demo Board
  • Configuration
    2ED4820-EM, ILD8150, IPT010N08NM5, TLE9012DQU, TLE9351BVSJ, TLI4971-A025T5-E0001, TLS205B0EJ V33, TLS208D1EJV
  • Description
    Demo board for BMS power, utilized in Infineon Mobile Robot (IMR)
  • Dimensions
    40x105x180 mm
  • Input Type
    DC
  • Interfaces
    Card edge connector, 2.54 mm pitch
  • Qualification
    Consumer, Industrial
  • Sub Application
    IMR
  • Supply Voltage
    40.8 V to 50.4 V
  • Target Application
    Robotics
Recommended
OPN
DEMOIMRBMSPWRV1TOBO1
Product Status active and preferred
Infineon Package --
Package Name N/A
Packing Size 1
Packing Type CONTAINER
Moisture Level N/A
Moisture Packing NON DRY
Lead-free No
Halogen Free No
RoHS Compliant Yes
Infineon stock last updated:
 ea. in stock

Product Status
Active
Infineon Package --
Package Name -
Packing Size 1
Packing Type CONTAINER
Moisture Level -
Moisture Packing NON DRY
Lead Free
Halogen Free
RoHS Compliant
ea.
in stock
This 44.4 V nominal voltage demo board, with a voltage range between 30 V and 50.4 V and a charging and discharging rate of 1 C & 5 C, is delivered in a modular design by combining the DEMO_IMR_BMSPWR_V1 power board (on this page) and the DEMO_IMR_BMSCTRL_V1 controller board, with the required software. The IMR uses two modular BMS solutions, supporting hot-swapping of the batteries, meaning that the robot never has to be powered off.

Features

  • Overvoltage or undervoltage of a cell
  • External NTC resistance measures faults
  • Open load diagnostics error monitoring
  • Balances over
  • and undercurrent errors
  • ADC cross-check error
  • Internal overtemperature detected
  • Register CRC check fault detected
  • Internal IC error
  • List of components:
  • 2ED4820-EM
  • ILD8150
  • IPT010N08NM5
  • TLE9012DQU
  • TLE9351BVSJ
  • TLI4971-A025T5-E0001
  • TLS205B0EJ V33
  • TLS208D1EJV

Benefits

  • Monitoring of 12 battery cells in series
  • Hot plugging support
  • Dedicated 16-bit delta-sigma ADC
  • High-accuracy measurement for SoC & SoH
  • Integrated stress sensor
  • Secondary ADC
  • Five temperature measurement channels
  • Internal temperature sensors
  • Integrated balancing switch
  • Differential serial 2 Mbit/s interface
  • Four additional GPIO pins
  • Internal round-robin cycle routine

Bill of Material

Documents

Documents

Design resources

Partner solutions

Developer community

{ "ctalist":[ { "link" : "https://community.infineon.com/t5/forums/postpage/choose-node/true", "label" : "Ask the community", "labelEn" : "Ask the community" }, { "link" : "https://community.infineon.com/t5/Forums/ct-p/products", "label" : "View all discussions", "labelEn" : "View all discussions" } ] }