Active and preferred
RoHS Compliant
Lead-free

TLE9881-2QTW60

The MOTIX™ TLE9881-2QTW60 offers solutions for automotive applications such as coolant pumps
Data Sheet
package
board
ea.
in stock

Content could not be loaded

Unfortunately, we were unable to load the content for this section. You may want to refresh the page or try again later.

TLE9881-2QTW60
TLE9881-2QTW60
ea.
Data Sheet

Product details

  • Family
    MOTIX™ motor control SoCs
  • Flash
    128 kByte
  • Frequency
    60 MHz
  • GPIO
    15
  • Interfaces
    PWM, CAN2.0
  • MCU
    Arm® Cortex®-M3
  • Motor Driver
    H-bridge driver
  • Operational Amplifier
    Yes
  • Planned to be available until at least
    2039
  • PN MOS DRIVER
    No
  • Power Stage
    No
  • RAM
    16 kByte
  • SD-ADC
    yes
  • Supply Voltage
    5.5 V to 28 V
  • Temperature
    - 40°C - 175°C
Recommended
OPN
TLE98812QTW60XUMA1
Product Status active and preferred
Infineon Package
PG-TQFP-48
Package Name N/A
Packing Size 2500
Packing Type TAPE & REEL
Moisture Level 3
Moisture Packing DRY
Lead-free Yes
Halogen Free Yes
RoHS Compliant Yes
Infineon stock last updated:
 ea. in stock

Product Status
Active
Infineon Package
PG-TQFP-48
Package Name -
Packing Size 2500
Packing Type TAPE & REEL
Moisture Level 3
Moisture Packing DRY
Lead Free
Halogen Free
RoHS Compliant
ea.
in stock
The MOTIX™ TLE9881-2QTW60 is a fully integrated 2-Phase motor driver with an Arm® Cortex®-M3 core, flash memory, analog and mixed-signal peripherals, a CAN transceiver, and driving stages on a single die. This compact chip features two 14-bit sigma-delta ADCs. The device is designed to address a wide range of automotive DC motor control applications, such as coolant pumps.

Features

  • 32-bit Arm® Cortex®-M3 up to 60 MHz
  • Single power supply from 5.5 V to 28 V
  • On-chip oscillator and PLL for clock
  • 128 KB flash, 16 KB RAM, EEPROM emu
  • Integrated CAN-FD transceiver
  • High voltage monitoring pin (MON)
  • Fast synchronous communication (SSC)
  • Two-phase bridge driver (BDRV)
  • Low-side shunt current sense amplifier
  • 8-bit and 12-bit ADCs with multiplexed inputs
  • 2x 14-bit SDADC, 2 differential inputs
  • Tj: -40°C to 175°C, Package: TQFP-48

Benefits

  • High performance
  • Optimized BOM cost
  • Premium design-in experience

Applications

Documents

Documents

Design resources

Partner solutions

Developer community

{ "ctalist":[ { "link" : "https://community.infineon.com/t5/forums/postpage/choose-node/true", "label" : "Ask the community", "labelEn" : "Ask the community" }, { "link" : "https://community.infineon.com/t5/Forums/ct-p/products", "label" : "View all discussions", "labelEn" : "View all discussions" } ] }