Active and preferred
RoHS Compliant
Lead-free

TLE9263-3BQX

The TLE9263-3BQX is a monolithic integrated circuit in an exposed pad VQFN-48 (7mm x 7mm) power package with LTI feature to support AOI
Data Sheet
package
board

Content could not be loaded

Unfortunately, we were unable to load the content for this section. You may want to refresh the page or try again later.

TLE9263-3BQX
TLE9263-3BQX
Data Sheet

Product details

  • Family
    OPTIREG™ Mid-Range+ SBC
  • Green
    RoHS compliant, Halogen free
  • Output Drivers
    4 x High-Side Switch 150 mA
  • Currently planned availability until at least
    2038
  • Quiescent Current
    15 μA (typ) Sleep Mode
  • Standby Current
    44 μA (typ) Stop Mode
  • Transceiver
    1 x CAN FD ISO 11898 - 2, 2 x LIN2.2 / J2602
  • Transmission Rate max
    5 MBit/s
  • Voltage Regulator Output ((VCC1))
    5V / 250 mA
  • Voltage Regulator Output ((VCC3))
    5V or 3.3V / up to 400 mA
  • Voltage Regulator Output ((VCC2))
    5V / 100 mA
  • Wake-up Inputs
    Wake Pins, CAN, LIN
Recommended
OPN
TLE92633BQXXUMA2
Product Status active and preferred
Infineon Package
PG-VQFN-48
Package Name N/A
Packing Size 2500
Packing Type TAPE & REEL
Moisture Level 3
Moisture Packing DRY
Lead-free Yes
Halogen Free Yes
RoHS Compliant Yes
Infineon stock last updated:

Product Status
Active
Infineon Package
PG-VQFN-48
Package Name -
Packing Size 2500
Packing Type TAPE & REEL
Moisture Level 3
Moisture Packing DRY
Lead Free
Halogen Free
RoHS Compliant
CAN-LIN SBC for automotive applications. Includes LDOs for microcontroller (5V) and sensor (5V), PNP transistor driver (5V/3.3V), HS-CAN transceiver (CAN FD, Partial Networking), LIN transceiver. High-side switches, 16-bit SPI. Watchdog, Fail Outputs, undervoltage reset. Low-power modes for battery apps. Wake-up via buses, inputs, cyclic wake. Built for automotive conditions.

Features

  • Low current in Stop & Sleep Modes
  • Periodic Cyclic Wake in SBC Normal Mode
  • Periodic Cyclic Sense in SBC Normal
  • Low-Drop Voltage Regulator 5V, 250mA
  • Low-Drop Voltage Regulator 5V, 100mA
  • Low-Drop Voltage Regulator, external PNP
  • High-Speed CAN Transceiver: ISO 11898-2
  • LIN Transceivers with TXD Timeout
  • Hardware Requirements for LIN, CAN,
  • Four High-Side Outputs 7Ω typ.
  • Dedicated High-Side Supply Pin
  • 2 GPIOs: Configurable I/O, High Voltage

Documents

Documents

Design resources

Partner solutions

Developer community

{ "ctalist":[ { "link" : "https://community.infineon.com/t5/forums/postpage/choose-node/true", "label" : "Ask the community", "labelEn" : "Ask the community" }, { "link" : "https://community.infineon.com/t5/Forums/ct-p/products", "label" : "View all discussions", "labelEn" : "View all discussions" } ] }