Please note that this is an end of life product. See newer alternative product version Please note that this is an end of life product. See newer alternative product version
END OF LIFE
discontinued
RoHS Compliant
Lead-free

TLE5011

END OF LIFE
XENSIV™ - TLE5011 magnetic angle sensor with integrated magnetic field sensing
Data Sheet
package

Content could not be loaded

Unfortunately, we were unable to load the content for this section. You may want to refresh the page or try again later.

TLE5011
TLE5011
Data Sheet

Product details

  • Classification
    QM
  • Interfaces
    SPI
  • ISO 26262
    QM
  • Magnetic field
    25 mT to 70 mT
  • Package
    SMD
  • Supply Voltage
    -0.5 V to 6.5 V
  • Supply Voltage ((V))
    -0.5-6.5
  • Technology
    GMR
  • Temperature
    -40 °C to 150 °C
OPN
TLE5011FUMA1
Product Status discontinued
Infineon Package
PG-DSO-8
Package Name N/A
Packing Size 2500
Packing Type TAPE & REEL
Moisture Level N/A
Moisture Packing DRY
Lead-free Yes
Halogen Free No
RoHS Compliant Yes
Infineon stock last updated:

Product Status discontinued
Infineon Package
PG-DSO-8
Package Name -
Packing Size 2500
Packing Type TAPE & REEL
Moisture Level -
Moisture Packing DRY
Lead Free
Halogen Free
RoHS Compliant
The TLE5011 is a 360° angle sensor using iGMR elements to detect magnetic field orientation via sine and cosine components. It communicates via a bi-directional SSC interface compatible with SPI. The digital sine/cosine values enable angle calculation using a CORDIC algorithm. Multiple TLE5011 can connect to one microcontroller for redundancy, synchronized through a broadcast command, each with a dedicated chip select (CS) pin.

Features

  • Giant Magneto Resistance (GMR)-based principle
  • Integrated magnetic field sensing for angle measurement
  • Designed for 3.3 V and 5 V systems
  • Full 0 - 360° angle measurement
  • Highly accurate single-bit SD-ADC
  • 16-bit representation of sine / cosine values on the interface
  • Wide magnetic operating range: 30mT to 50mT
  • Bi-directional SSC interface up to 2 Mbit/s
  • 3-pin SSC interface, SPI compatible with open drain
  • ADCs and filters synchronized with external commands via SSC
  • Test resistors for simulating angle values
  • Core supply voltage 2.5 V
  • 0.25-μm CMOS technology
  • Automotive qualified: -40°C to +150°C (junction temperature)
  • Latch-up immunity according JEDEC standard
  • ESD > 4 kV (HBM)
  • Green package with lead-free (Pb-free) plating

Applications

Documents

Documents

Design resources

Partner solutions

Developer community

{ "ctalist":[ { "link" : "https://community.infineon.com/t5/forums/postpage/choose-node/true", "label" : "Ask the community", "labelEn" : "Ask the community" }, { "link" : "https://community.infineon.com/t5/Forums/ct-p/products", "label" : "View all discussions", "labelEn" : "View all discussions" } ] }