Please note that this is an end of life product. See newer alternative product version Please note that this is an end of life product. See newer alternative product version
END OF LIFE
discontinued
RoHS Compliant

TLE6368G2

END OF LIFE
The TLE6368G2 is a multi voltage power supply system especially designed for automotive applications (12V / 24V battery and the new 42V powernet).
Data Sheet
package

Content could not be loaded

Unfortunately, we were unable to load the content for this section. You may want to refresh the page or try again later.

TLE6368G2
TLE6368G2
Data Sheet

Product details

  • Base Product
    TLE6368
  • Classification
    n.a
  • Comments
    Automotive PMIC, Vin up to 60V, 3 linear post regulators (5V, 3.3/2.6V, 3.3/2.6V) and 6 voltage trackers (5V), SPI
  • Enable (=Inhibit)
    no
  • Iout max
    500 mA, 350 mA, 17 mA, 1 mA, 800 mA
  • Iq
    10 µA
  • ISO 26262
    QM
  • Operating Temperature
    -40 °C to 150 °C
  • Operating Voltage
    5.5 V to 60 V
  • Over Voltage Protection
    no
  • Package
    PG-VQFN-48
  • Planned to be available until at least
    n.a
  • Product Group
    PMIC
  • Qualification
    Automotive
  • Regulator Type
    Buck
  • Reset
    yes
  • Target Application
    Safe Control
  • Tolerance
    2%
  • VQ (multiple)
    2.4 V, 2.6 V / 3.3 V, 5 V (trackers), 5.0 V
  • Watchdog
    Window-WD
OPN
TLE6368G2AUMA1
Product Status discontinued
Infineon Package
PG-DSO-36
Package Name N/A
Packing Size 800
Packing Type TAPE & REEL
Moisture Level 3
Moisture Packing DRY
Lead-free No
Halogen Free Yes
RoHS Compliant Yes
Infineon stock last updated:

Product Status discontinued
Infineon Package
PG-DSO-36
Package Name -
Packing Size 800
Packing Type TAPE & REEL
Moisture Level 3
Moisture Packing DRY
Lead Free
Halogen Free
RoHS Compliant
The TLE6368G2 powers 32-bit microcontroller systems with 5V, 3.3V, and 2.6V rails, as well as external sensor regulators. It integrates a Buck converter, linear regulator, and tracker block for minimal power dissipation, providing pre-regulated 5.5V and post-regulated 5V, 3.3V, and 2.6V outputs. The device includes voltage trackers, undervoltage detection circuits, a SPI-triggered window watchdog, and a standby mode for energy saving.

Features

  • High efficiency Pre-/Post-regulator architecture
  • Wide input voltage range from 5.5V to 60V
  • Stand-by mode with low current consumption
  • Suitable for standard 12V- and 24V-PowerNets
  • Step down converter as pre-regulator: 5.5V / 1.5A
  • Step down slope control for lowest EME
  • Switching loss minimization
  • Three high current linear post-regulators with selectable output voltages: 5V / 800mA., 3.3V or 2.6V / 500mA, 3.3V or 2.6V / 350mA
  • Six independent voltage trackers (followers): 5V / 17mA each
  • Stand-by regulator with 1mA current capability
  • Three independent undervoltage detection circuits (e.g. reset, early warning) for each linear post-regulator
  • Power on reset functionality
  • Window-Watchdog
  • Tracker control and diagnosis by SPI
  • All outputs protected against short-circuit
  • Power PG-DSO-36-26 package
  • Green (RoHS compliant) version of TLE6368-G2
  • AEC qualified

Benefits

  • High efficiency for complex supply systems
  • Suitable as well for truck systems (24V-net)
  • Low current consumption in stand-by
  • Lowest EME by slope control easy realization of multiple supply rail systems
  • Flexible sensor supply system (trackers can be combined for higher current)
  • Monitoring and control of µC by reset generator and window-watchdog
  • Thermal enhanced power package for wide temperature range

Applications

Documents

Documents

Design resources

Partner solutions

Developer community

{ "ctalist":[ { "link" : "https://community.infineon.com/t5/forums/postpage/choose-node/true", "label" : "Ask the community", "labelEn" : "Ask the community" }, { "link" : "https://community.infineon.com/t5/Forums/ct-p/products", "label" : "View all discussions", "labelEn" : "View all discussions" } ] }