Please note that this is an end of life product. See newer alternative product version Please note that this is an end of life product. See newer alternative product version
View replacement
END OF LIFE
discontinued
RoHS Compliant
Lead-free

TLS820D2EL VSE

END OF LIFE
The TLS820D2EL VSE is a 200mA low dropout voltage regulator (LDO) with Reset and low Iq in SSOP-14 Package, selectable output 5V and 3.3V
Data Sheet
package
View replacement

Content could not be loaded

Unfortunately, we were unable to load the content for this section. You may want to refresh the page or try again later.

TLS820D2EL VSE
TLS820D2EL VSE
View replacement
Data Sheet

Product details

  • Accuracy
    2 %
  • Base Product
    TLS820D2xx
  • Dropout Voltage
    100 mV
  • Early Warning
    no
  • Enable (=Inhibit)
    yes
  • Hold
    no
  • Operating Temperature
    -40 °C to 150 °C
  • Operating Voltage
    3 V to 40 V
  • Output Current max
    200 mA
  • Output Voltage Type
    Selectable 5.0 V or 3.3 V
  • Over Voltage Protection
    no
  • Planned to be available until at least
    n.a
  • Power Fail
    no
  • Power Good
    no
  • Qualification
    Automotive
  • Quiescent Current
    20 µA
  • Regulator Type
    High Performance
  • Reset
    yes
  • Status Output
    no
  • Watchdog
    no
OPN
TLS820D2ELVSEXUMA2
Product Status discontinued
Infineon Package
PG-SSOP-14
Package Name N/A
Packing Size 2500
Packing Type TAPE & REEL
Moisture Level 3
Moisture Packing DRY
Lead-free Yes
Halogen Free Yes
RoHS Compliant Yes
Infineon stock last updated:
View replacement

Product Status discontinued
Infineon Package
PG-SSOP-14
Package Name -
Packing Size 2500
Packing Type TAPE & REEL
Moisture Level 3
Moisture Packing DRY
Lead Free
Halogen Free
RoHS Compliant
View replacement
The OPTIREG™ linear TLS820D2ELVSE is a high-performance voltage regulator for automotive systems. It features a very low 20μA quiescent current, input voltage range of 3V to 40V, and selectable output voltages (5V and 3.3V). Additionally, it includes a reset feature for voltage supervision and operates during cranking conditions.

Features

  • Wide input voltage range from 3.0 V to 40 V
  • Selectable output voltage 5 V or 3.3 V
  • Output voltage accuracy ≤ ±2%
  • Output current capability up to 200 mA
  • Ultra low current consumption, typical 20 μA
  • Very low dropout voltage, typical 100 mV, at output currents below 100 mA
  • Stable with ceramic output capacitor of 1 μF
  • Enable
  • Reset output
  • Adjustable reset threshold down to 2 V
  • Overtemperature shutdown
  • Output current limitation
  • Wide temperature range
  • Green Product (RoHS compliant)

Benefits

  • A single device for 5V and 3.3V supply
  • Very wide input voltage range
  • Fast voltage regulation loop
  • Low passive component BOM cost
  • Supervisory functionality (RESET)
  • Suitable for Cranking condition
  • Low current consumption

 Best fit to supply:

  • MCU / Microcontroller (5V and 3.3V)
  • CAN Transceiver
  • FlexRay Transceiver
  • Sensors (on-board)
  • Actuator ICs
  • Driver ICs

Diagrams

Diagram_TLS820D2_website
Diagram_TLS820D2_website
Diagram_TLS820D2_website Diagram_TLS820D2_website Diagram_TLS820D2_website
Diagram_TLS820D2_website Diagram_TLS820D2_website Diagram_TLS820D2_website
×
modalImg

Documents

Documents

Design resources

Partner solutions

Developer community

{ "ctalist":[ { "link" : "https://community.infineon.com/t5/forums/postpage/choose-node/true", "label" : "Ask the community", "labelEn" : "Ask the community" }, { "link" : "https://community.infineon.com/t5/Forums/ct-p/products", "label" : "View all discussions", "labelEn" : "View all discussions" } ] }