TRAVEO™ T2G CYT2B6 Series
Arm® Cortex®-M4F-based CYT2B6 series with 512 KB flash memory
Infineon's TRAVEO™ T2G CYT2B6 MCUs ingeniously integrate powerful processing capabilities and network connectivity into Arm® Cortex®-M4F, revolutionizing automotive body electronics. Used for body control modules (BCM), HVAC, and lighting, these microcontrollers ensure advanced security via HSM, Arm® Cortex®-M0+ for secure processing, and dual-bank flash for FOTA. Six power modes optimize the ECUs' energy use, complemented by top-tier security for impermeable communications. Enhanced memory and pin count flexibility
TRAVEO™ T2G CYT2B6 features a robust 32-bit MCU core led by the 80 MHz Arm® Cortex®-M4 single, a memory spectrum of 512 KB flash, 64 KB work flash, 64 KB SRAM, and an Arm® Cortex®-M0+ dedicated to cryptography. Packaged from 64/80/100-pin LQFP, these MCUs meet space and layout needs.
The device offers various additional features, up to 4-ch CAN FD, up to 6-ch SCB, 5-ch LIN-UART. it has also up to 32 channels for the AD converter, with 12-bit resolution and 3x successive approximation ADC (SAR ADC) units. It also boasts up to 4-channel motor control timers, 46-channel 16-bit timer/counter/pulse-width modulation (TCPWM), and 2-channel 32-bit TCPWM for synchronization.
- 80-MHz Arm® Cortex®-M4F Single
- 512 KB code flash, 96 KB work flash and 64 KB SRAM and Arm® Cortex®-M0+
- Up to 4-ch CAN FD and up to 6-ch serial communication block (SCB) and 5-ch LIN/UART
- Up to 32-ch, 12-bit with 3x successive approximation ADC (SAR ADC) units
- 46-ch 16-bit and 2-ch 32-bit Timer Counter Pulse Width Modulator (TCPWM)
- Real Time Clock (RTC)
- Event generation timer
- Up to 78 programmable GPIOs
- Embedded eSHE (Enhanced Secure Hardware Extension), HSM (Hardware Security Module) and hardware-accelerated cryptography engine (on/off option)*
- One Time Programmable Fuses (OTP) to manage device lifecycle
- Memory protection unit (MPU), shared memory protection unit (SMPU) and peripheral protection unit (PPU) for memory and peripheral protection
- Support JTAG security for secure debugging
- Safety features: ECC for memory, monitors for power supply voltage and clock
*Firmware solution available include Infineon's security low level driver and third-party firmware
100/80/64 LQFP
- 40 to 105°C (S-grade)
- 40 to 125°C (E-grade)
