PSoC™ Programming Solutions

Overview

Use the folowing software for programming Infineon devices. They will Program, Erase, Verify, and Read the flash of the target device.

Programmer Software Devices Infineon Debug Probe IDE Support Host OS Communication Firmware
Cypress™ Programmer PSoC™ 6 MCU
IoT Platforms such as
CYW94390x
CYW207xx		 MiniProg4 ModusToolbox™ Software Windows
Linux
macOS		 KitProg3
PSoC™ Programmer Most PSoC™ 6 devices*
PSoC™ 5LP
PSoC™ 4
PSoC™ 3
PSoC™ 1
FM0+ devices
USB Type C		 MiniProg4 (for PSoC™ 4, PSoC™ 5LP, and PSoC™ 6 MCU devices)
MiniProg3		 PSoC™ Creator
PSoC™ Designer (for PSoC™ 1 devices)		 Windows KitProg3
KitProg2
KitProg1
Cypress™ Programmer

Cypress™ Programmer is a flexible, cross-platform application for programming Infineon devices. It can Program, Erase, Verify, and Read the flash of the target device. It includes:

  • OpenOCD is a programming tool modified slightly from OpenOCD FOSS tool to support Infineon devices and is installed as part of Cypress™ Programmer.

Cypress™ Programmer and ModusToolbox™ IDE use KitProg3 low-level communication firmware. fw-loader is a software tool you can use to easily switch back and forth between KitProg2 and KitProg3. fw-loader is installed with ModusToolbox™ IDE.

PSoC™ Programmer is a complete package that installs all components required for a programming and debug solution. In addition, the following tools are installed.

  • Clock Programmer is used in configuring Cypress' configurable Clock devices. The Clock Programmer utilizes the CY3240 USB-I2C Bridge kit to configure Infineon Clock devices.
  • Bridge Control Panel is a simple debugging tool that comes with PSoC™ Programmer. Use it to communicate with target devices over I2C/UART/SPI serial communications interfaces.
Support