TLE9560-3QX
The TLE9560-3QX is a multifunctional system IC with integrated power supply, communication interfaces,
multiple half-bridges and support features in an exposed pad PG-VQFN-48-70 power package. The device is
designed for various motor control automotive applications.
To support these applications, the device provides the main functions, such as a 5 V lowdropout
voltage regulator one HS-CAN transceiver supporting CAN FD, CAN Partial Networking (incl. FD
Tolerant Mode), one LIN transceiver, two half-bridges for DC motor control, and one 32 bit serial peripheral
interface (SPI).
The device includes diagnostic and supervision features, such as drain-source monitoring and open-load
detection, short circuit protection, configurable time-out and window watchdog, fail-safe output, as well as
overtemperature protection.
Type Package Marking
TLE9560-3QX PG-VQFN-48-70 TLE9560-3QX
Zusammenfassung der Merkmale
- Low-drop voltage regulator 5 V, 250 mA for main supply
- Two half-bridge gate drivers for external N-channel MOSFETs
- Adaptive MOSFET gate control:
– Improved electromagnetic emission
– Reduced switching losses in PWM mode
– High efficient constant gate charge - Control of reverse battery protection MOSFET
- High-speed CAN transceiver supporting CAN FD communication up to 5 Mbit/s according to ISO11898-
2:2016 including selective wake-up functionality via CAN partial networking and CAN FD tolerant mode - LIN Transceivers LIN2.2/SAE J2602 with programmable TXD time-out feature and LIN flash mode
- Fail Outputs for fail-safe signalization
- Configurable wake-up sources
- Four high-side outputs 7 Ω typ.
- One PWM inputs
– High-side and low-side PWM capable
– Actice free-wheeling
– Up to 25 kHz PWM frequency - 32 bit serial peripheral interface (SPI) with cyclic redundancy check (CRC)
- Very low quiescent current consumption in Stop Mode and Sleep Mode
- Periodic cyclic sense and cyclic wake in Normal Mode, Stop Mode and Sleep Mode
- Reset and interrupt output
- Drain-source monitoring and open-load detection
Vorteile
Product validation
Qualified for automotive applications. Product validation according to AEC-Q100/101.
Potentielle Zielanwendungen
- Door module
- Power lift gate
- Power sliding doors
- Seat control module
- Seatbelt pretension
- Steering column lock
- Sunroof module
Access to complete technical documentation including application notes and design tools:
- Please register under myinfineon.com with your company e-mail address
- Please get in touch with your respective Distribution or Sales contact to request the elevation of your myInfineon account to partner status; this is required for access to our myICP portal
- Send login name to: motorcontrolsolutions@infineon.com
- Automated update service will be provided for new documents once you are registered
- Full registration process might take up to 24h to be completed (due to different time zones)
MOTIX™ TLE956x is ISO26262-ready! How to obtain Safety Application Note?
myInfineon Collaboration Platform, otherwise known as the myICP is a portal through which you can access all the documentation related to Infineon’s products. While most documentation is accessible via Infineon’s website, confidential documents requiring Non-Disclosure Agreements (NDAs) from customers can be accessed from myICP.
Access to myICP is granted in three basic steps:
Step 1: Register to myInfineon Platform.
- Sign up to MyInfineon here
- Type in the necessary information in the registration form
- Activate your account by clicking on the link in the e-mail sent to you
Step 2: Become promoted user in myInfineon by contacting your Infineon counterpart or by clicking the promotion banner in the My Profile tab on MyInfineon.
Step 3: Get access to the required documentation.
