リアルとデジタルの世界をひとつにTLE9850QX
TLE9850QX is designed for unidirectional automotive applications such as HVAC Blower
TLE9850QX is part of the Infineon TLE985x Embedded Power IC product family. The single chip single-phase motor driver integrates the industry standard Arm® Cortex®-M0 core with an NFET driver. This system-on-chip solution includes two fully integrated NFET drivers optimized to drive a single phase motor via four external power NFETs, a charge pump enabling low voltage operation and programmable current along with current slope control for optimized EMC behavior. Its peripheral set includes a current sensor, a successive approximation ADC synchronized with the capture and compare unit for PWM control and 16-bit timers. A LIN transceiver is also integrated to enable communication to the device along with a number of general purpose I/Os. It includes an on-chip linear voltage regulator to supply external loads.
Produced on Infineon's first-in-industry automotive qualified 130 nm Smart Power technology, the Infineon Embedded Power System-on-Chip solution offers an unmatched level of integration as well as system cost to performance optimization for the target application segments.
The TLE985x product family is offered in a leadless VQFN-48 package to save board space.
特長
- 32-bit Arm® Cortex®-M0 Core up to 40MHz clock frequency
- Single power supply VS = 5.5 V to 28 V
- FLASH 48 KB, RAM up to 4 KB
- 1xLIN transceiver
- 2xUART, 2xSSC
- Single phase bridge driver with charge pump and PWM generator
- 1xlow-side shunt current sense amplifier
- 1x10-bit ADC/12 ch and 1x8-bit ADC/9 ch
- Temperature Range Tj = -40°C to +150°C
- Ultra compact application footprint with VQFN-48 packages
Infineon Embedded Power ICs are supported by a complete development tool chain provided by Infineon and third party vendors. The tool chain includes compilers, debuggers, evaluation boards, LIN low level drivers and configuration tools as well as variety of example software code.
For more information about the tool chain installation steps, watch our video "Toolchain Installation for Embedded Power ICs / TLE98xx".
| Toolchain Installation Steps | Company | Description | |
| STEP 1 | Download and Install |
 |
|
| STEP 2 | Download Config Wizard |
 |
|
| STEP 3 | Download and Install |
 |
|
| STEP 4 | Download the SDK via µVision 5 Pack Installer (see step 1) |
 |
|
*If you still need the Config Wizard V1, please follow the link.
Additional Tools for Design-in
Embedded Power ICs provide a built-in boot strap loader (BSL) for programming the system-on-chip devices over the built-in LIN transceiver or UART. The uIO Stick acts as an interface between the TLE98xx device and a PC. It handles the BSL protocols as well as the physical layers. A PC application (uIO BSL Tool) provides access to all BSL functions of the Embedded Power device.
-
Micro Inspector Pro is a graphical visualization tool within Infineon Toolbox to interact with Infineon embedded systems based on Arm® Cortex®-M cores.
Micro Inspector Pro in unregistered mode (without entering a license key) allows the complete usage of existing dashboards. With the registered version, saving a modified or newly created dashboard is possible.
The license key to register can be requested via Infineon support channel: https://www.infineon.com/tac
Infineon recommends IHR and Vector as partners for LIN low level drivers (LLDs) - Reputed organizations in the field of automotive electronics
IHR and Vector are proven partners for drivers and driver configuration tools compatible with Infineon´s range of Embedded Power ICs, and support LIN specifications 1.3, 2.0 and 2.1. The offered solution provides a wide range of options for designers, with reliable testing specifications, intuitive operation, and diagnostic services.
