32-bit TriCore™ AURIX™ – TC2xx

CycurHSM

RTA-BSW (Basic Software) is the next-generation software platform for AUTOSAR basic software - easy to configure, integrate, and test. RTA-BSW is developed in accordance with ISO 26262 development processes conformant to ASIL-D and can be used in even the most demanding of safety-critical applications. RTA-BSW supports AUTOSAR 4.x and consists of several stacks that provide support for a wide range of features such as operating system, run-time environment, communication over CAN and LIN, memory, and diagnostic and calibration protocols such as XCP.

The SCANFLEX hardware was the first fully modular JTAG/Boundary Scan platform on the market and is still the most modern system architecture available to date. It consists essentially of three components: controllers, TAP transceivers and I/O modules. Hardware platform SCANFLEX is not only the best choice for testing but also for programming of internal and external devices.

The KPIT Opcode Test Code Generator OTCG is a PC based tool which generates a unique test pattern for every used opcode in the user application. This enables safety checks for your system.

VTP consists of a Configuration Tool(Volcano Configuration Generator-(VCFG) ) and the software modules necessary to provide CAN and LIN communication for your application.

The Volcano LIN Target Package (LTP) is a LIN only product providing a resource efficient implementation for LIN nodes according to the LIN 2.0 standard.

Complete CANopen source code implementation of the CiA standards CiA301 and CiA302. Additional CiA device profiles are supported by the company's CANopen Design Tool.

The ISO 15765 protocol stack was designed by Simma Software to meet the demanding needs of the high speed Controller Area Network (CAN). Ports available for TriCore product lines.

The SAE J1939 protocol stack was designed by Simma Software to meet the demanding needs of the high speed Controller Area Network (CAN). Ports available for TriCore product lines.

Simma Software offers SAE J1939 and ISO 15765 flash bootloaders for the TriCore product line. These bootloaders allow an ECU's flash to be upgraded in the field.

The CANopen protocol stack was designed by Simma Software to meet the demanding needs of the high speed Controller Area Network (CAN). Ports available for TriCore product lines.

ADLATUS® is the modular embedded software solution for reprogramming of automotive ECUs (Electronic Control Units)

MICROSAR products give you a complete context for implementing software architecture based on AUTOSAR-Standard. Vector provides with MICROSAR all necessary Basis Software Modules of the Service and ECU Abstraction Layers. TriCore ™ specific Drivers of the Microcontroller Abstraction Layer are completely integrated in the MICROSAR Basis Software. This permits to use for all basis software the optimised Vector toolchain for AUTOSAR.

The Vector CANbedded environment consists of a number of adaptive source code components that cover the basic communication requirements in automotive applications.

The Vector CANbedded LIN environment consists of a number of adaptive source code components that cover the basic communication requirements to be applied in the LIN environment.

The Vector embedded Flash Bootloader for in-field reprogramming is adapted for most of the automotive manufacturers. It is available for ECUs on vehicle networks like CAN, LIN or FlexRay.

VectorCAST/Manage

Automated Test Management Enterprise wide for multiple targets, systems, test configurations, multiple compilers, debuggers, Continuous Integration, Change Based Testing with Change Impact Analysis, clusters, Board-Farms, Simulators and Probes

VectorCAST/C++

For C and or C++ Unit Testing, rapid, easy to use command line/GUI pre-populated with suitable test data options or select your own, includes coverage for unit testing -This product is Highly Recommended for SIL-2-4 / ASIL-B-D

VectorCAST/Cover

Aggregator for Coverage data, resolves to a single number, Code Complexity analysis, able to import from multiple sources (sources can be non-VectorCAST, e.g. Tessy® or RTRT®) – This product supports understanding of Project Status and is 'Recommended' for certification in SIL-2-4 and ASILB-D for Coverage and Complexity

VectorCAST/CBA

Coverage By Analysis, manages data analysis from Formal Methods or Static Analysers, e.g. Klocwork, QAC, Lint etc enables easy transfer to VectorCAST/Cover – Recommended for SIL2-4/ ASILB-D

VectorCAST/MCDC

Provides Test and Analysis of Decision Coverage – Highly Recommended for SIL-3-4 and ASIL-B-D

VectorCAST/RGW

To link your software requirements capture to your tests and results e.g. with IBM-DOORS®, PTC-Integrity® Siemens-Polarion® Applicable for SIL1-4

VectorCAST/RSP

VectorCAST/RSP is the module that has the “knowledge” on how to download the VectorCAST test harness to the target, how to initialize it, and how to pass it test cases for execution. It also knows how to capture pass/fail results and code coverage metrics. It works behind the scenes to make testing on target completely automated and transparent.

• Programming Service: Flatek's production facility can support various IC packages, and offer 2D inspection, and 3D lead scan services
• Own development of algorithms & adapters.
• On-Site Programming : We also focus on programming at customer's facility In addition. By applying technical support and standard flow control, Flatek equips with advanced device programmer and professional engineers to ensure precise control of cycle time and quality.
• IC Marking & Laser Marking.
• Tape reel & Dry packing follow EIA 481 standard.
• Functional test and Final test

• Proprietary automated handler, programmers and algorithms, e.g. margin verify optimize programming and margin verifying algorithm for high-speed and quality
• generating serial number based on individual customer specification
• 100% tracebility over product life cycle, down to device ID level
• final test of each device (function/memory)
• vision inspection for 2D-Collinearity and 3D-Coplanarity

• End-pumped Solid State Laser for excellent readable type-face
• marking will not prevent vacuum picking of device

• vision controlled device placement and according plausibility check
• separate tape & reel service
• vision inspection for 2D-Collinearity and 3D-Coplanarity
• in accordance to EIA481 standards
• dry packaging, and if required, "pizza" boxed

• Test and selection of electronic components
• BURN IN, Temp. cycling, Temp. shock
• High / Low temperature test for military parts
• Tape & Reel service ( axial, radial, SMD )
• Analysis of electronic components
• Solder test / Degilding of Device PIN`s

e-Learnings

AURIX™ TC3xx communication interfaces

• Identify the communication interfaces available in AURIX™ TC3xx, and
• Understand their key features

Watch eLearning

What makes AURIX™ so easy to use

• Easily navigate through our website infrastructure and indicate where to find AURIXTM easy-to-reach sources of information and documentation
• Easily identify our tools and software platform, our partner ecosystem as well as our kits platform and its support ecosystem

Watch eLearning

Basics of software over-the-air concept using AURIX™ 

• Get to know why systems require frequent updates, how this is done and how automotive systems try to ensure their security when they are updated
• Learn how AURIX™ families of microcontrollers support over-the-air software updates

Watch eLearning

Secure CAN Communication

Understand how hackers use the CAN bus to interfere with in-vehicle communication, and be aware of how Infineon’s AURIX™ microcontrollers support secure CAN communication.

Watch eLearning

AURIX™  32-bit microcontroller family for CAV

• Know the AURIX™ 32-bit multicore microcontroller family
• Recognize how it applies to Commercial, Construction and Agricultural Vehicles (CAV)
• Be familiar with the safety standards and support models available, and
• Know which tools and development kits are available and where to find them.

Watch eLearning

AURIX™ 1G

• Identify the AURIX™ first generation target application segments,  setting trends and portfolio;
• Recognize the basis for AURIX™ high levels of safety and security and, finally,
• Understand the AURIX™ software characteristics and its available tools.

Watch eLearning

 AURIX™ for Advanced Driver Assistance Systems

• In this training you will get to know what ADAS is
• Understand how AURIX™ fits ADAS applications, and
• Know where to find AURIX™ support models, tools and development kits 

Watch eLearning

 AURIX™ Hardware Security Module for Automotive Cyber Security

• Be aware of the growing market for connected cars
• Recognize how connectivity poses a challenge to security
• Understand how the 1st Generation AURIX™ Hardware Security Module (HSM) works, its key features and applications

Watch eLearning

Powertrain electrification and Infineon's solutions for inverters

• Understand the importance of the powertrain electrification 
• Be familiar with the operating modes of the electric drive system

Watch eLearning

 How AURIX™ addresses electric vehicle application needs

• Get to know how AURIX™ is able to answer the needs of the electric vehicle market
• Recognize and explore how AURIX™ TC3xx addresses key electric vehicle challenges, and understand the main features of the AURIX™ TC3xx microcontroller

Watch eLearning

OPTIGA™ Trusted Platform Module & AURIX™: Perfect partners for automotive cybersecurity

• Identify common security threats to modern cars
• Understand how OPTIGA™ TPM can help automotive systems achieve a high level of security and their applications in different use cases in various host environments

Watch elearning

• Understand what TriCore™ is and identify the advantages it brings to users
• Be aware of the outlook of future developments

Watch eLearning

• Find out about the definition of gateway and zone controllers and their typical applications
• Discover the new routing requirements in gateway and zone controllers, and get an overview of the most generic block diagrams for gateway and zone controller units

Watch eLearning

• Categorize cyber security threats in the upcoming automotive electrical and electronic architecture 
• Identify how Infineon’s next generation AURIX™ TC4x microcontrollers are able to mitigate cyber security threats

Watch eLearning

• Explain how the major automotive trends are shaping the evolution of electrical and electronic or E/E architectures in cars
• Identify the trending E/E architecture concepts and their impact on networking technologies and recognize the solutions that Infineon provides to support current and future E/E architectures

Watch eLearning

• Recognize AURIX™ products within Infineon’s broad portfolio of microcontrollers for industrial applications and distinguish the different AURIX™ generations and their respective features
• Identify AURIX™ support tools to help you design-in this family of Infineon’s microcontrollers in your industrial applications

Watch eLearning