TLE9879 EVALKIT - Infineon Technologies

概要

TLE9879 EvalKit allows direct connection to a BLDC motor

The TLE9879 EvalKit offers complete evaluation of all functions and peripherals of the TLE9879QXA40 and allows direct connection to a BLDC motor via MOSFETS in B6- Bridge configuration, it includes: B6-Bridge for BLDC motor drive, UART and LIN for communication, direct access to all device I/Os and a J-Link debugger.

This evaluation kit uses the super set device TLE9879QXA40 and can therefore be used for the evaluation of all devices within the product family TLE987x.

パラメータ

技術資料他

注文

ボード

ソフトウエア&ツール

Infineon Embedded Power ICs are supported by a complete development tool chain provided by Infineon and third party vendors. The tool chain includes compilers, debuggers, evaluation boards, LIN low level drivers and configuration tools as well as variety of example software code.

For more information about the tool chain installation steps, watch our video "Toolchain Installation for Embedded Power ICs / TLE98xx".

Toolchain Installation Steps		Company	Description
STEP 1	Download and Install Keil^® µVision5		Arm^® Keil^®µVision is an integrated development environment which consists of code editor, compiler and debugger. To learn how to use Arm^® Keil^®µVision 5, check out our video "Get your motor spinning".
STEP 2	Download Config Wizard		Infineon provides the Config Wizard free of charge which is designed for configuration of chip modules. Config Wizard supports easy configuring of Embedded Power peripherals. Config Wizard V2 can be installed via the Infineon Toolbox. If you don`t have the Infineon Toolbox yet, please go to Infineon Toolbox and enjoy the release management for updates.*
STEP 3	Download and Install Segger J-Link Driver		SEGGER J-Link is a widely used driver for "on-board" or "stand-alone" debugger.
STEP 4	Download the SDK via µVision 5 Pack Installer (see step 1)		The Embedded Power Software Development Kit (SDK) is a low level driver library which can be downloaded within Keil^®µVision via the "Pack Installer"