CY8CKIT-005-A | MiniProg4 Program and Debug Kit

概要

The MiniProg4 Program and Debug Kit (CY8CKIT-005-A) is an all-in-one development programmer and debugger for PSoC™ 4, PSoC™ 5LP, and PSoC™ 6 MCU devices. Use MiniProg4 as a programmer or debug probe for supported devices. CY8CKIT-005-A is 100% compatible with all tools that supported the original MiniProg4 CY8CKIT-005, with additional JTAG programming and debugging functionality.

The MiniProg4 Program and Debug Kit (CY8CKIT-005-A) uses:

CMSIS-DAP interface over Serial Wire Debug (SWD) protocol - CMSIS-DAP V2.0.0 and V1.2.0.
Fast USB interface supports both bulk and HID transfers.
JTAG programming and debugging (added feature on Miniprog4 CY8CKIT-005-A)

MiniProg4 also provides USB-I2C, USB-SPI and USB-UART bridging functionality. MiniProg4 bridging capabilities are used by tools like CAPSENSE™ Tuner and the Device Firmware Upgrade Tool, delivered with ModusToolbox™ IDE. MiniProg4 is supported by ModusToolbox™, PSoC™ Creator, PSoC™ Programmer, and Bridge Control Panel.

Kit contents

The CY8CKIT-005-A PSoC™ MiniProg4 Program and Debug Kit includes:

MiniProg4 programmer/debugger
10-pin ribbon cable
USB Type-A to Type-C Cable
Quick Start Guide

If your computer has a USB Type-C port, obtain a Type-C to Type-C cable, or a USB Type-A to Type-C adapter, from your preferred supplier.

Programming and debugging

The MiniProg4 programmer/debugger provides the flexibility to work with the SWD or JTAG programming and debugging interface. MiniProg4 supports 32-bit Arm® Cortex®-M0/M0+/M3/M4 PSoC™ devices.

The MiniProg4 programmer/debugger is supported by the following software tools:

Interfaces