EZ-USB™ CX3 MIPI CSI2 to USB 5 Gbps Camera Controller
Overview
Add USB 5 Gbps connectivity to image sensors with MIPI CSI-2 interface
Infineon EZ-USB™ CX3 enables USB 5 Gbps connectivity to any image sensor which is compliant with Mobile Industry Processor Interface (MIPI) Camera Serial Interface Type 2 (CSI-2) standard. Based on the proven EZ-USB™ FX3 Platform, EZ-USB™ CX3 includes a fully accessible ARM9 CPU and 512 KB SRAM that provides 200 MIPS of computational power. EZ-USB™ CX3 also supports Camera Control Interface (CCI) for image sensor configuration. EZ-USB™ CX3's multiple peripheral interfaces such as I²C, SPI, and UART can be programmed to support pan, tilt and zoom or other camera control functions.
- Capable of streaming uncompressed video, including:
- 4K UHD video at 15 fps
- 1080p video at 30 fps
- 720p video at 60 fps
- Connectivity: MIPI CSI-2 to USB 5 Gbps bridge controller with an integrated USB 5 Gbps PHY
- Bandwidth: 4x CSI-2 lanes, 1 Gbps per lane
- Color format support: RAW8/10/12/141, YUV422/4442, RGB888/666/5653
- Camera protocol: UVC or proprietary
- Programmability: fully accessible ARM9 CPU with 200-MHz operation and 512-KB SRAM
- Package option: 121-ball BGA
- Adding USB 5 Gbps connectivity to any MIPI CSI-2 based camera
- Quick time-to-market with low development costs
- Turn-key solutions on industrial standards
- Check the CX3 reference design kit
- Download the CX3 datasheet, technical reference manual and RDK - documents, firmware, UVC video player
- Download and install the FX3 SDK setup
- Example firmware for OmniVision OV5640 and Aptina AS0260 image sensor interface
- Read the how to Interface a MIPI CSI-2 Image Sensor With EZ-USB® CX3 application note and refer to the SuperSpeed code examples
- Get your schematics reviewed by using the Online Tech Support Case System
Products
Highlights
Videos
Training
Support
