EZ-PD™ CCG3PA USB Type-C and Power Delivery

Overview

Infineon's USB Type-C power delivery solution for adapters and chargers

EZ-PD™ CCG3PA is Infineon's USB Type-C and power delivery controller targeting power adapter, mobile charger, car charger and power banks. CCG3PA supports power delivery 3.0, quick charge 4.0, integrated VBUS-to-CC short protection, 30 V-tolerant regulator, high-voltage PFET gate drivers, VBUS over-voltage and over-current protection, and ESD protection.

CCG3PA supports Downstream Facing Port (DFP), Upstream Facing Port (UFP), and Dual Role Port (DRP) and fully supports the power delivery 3.0 programmable power supply specification. CCG3PA is a programmable solution with 64 KB flash for firmware upgrade.

Infineon has USB Type-C and power delivery reference designs readily available online for various applications which can be used to speed up the design cycle.

Key features

USB Type-C and power delivery 3.0 programmable power supply
2x Legacy/Proprietary charging blocks: BC v1.2, Apple charging, Qualcomm charging 4.0, Samsung AFC
Integrated digital blocks
Four timers, counters and PWMs and up to 12 GPIOs
Two SCBs for configurable master/slave I²C, SPI or UART
Integrated analog blocks
30 V-tolerant regulator
VBUS-to-CC short protection
Integrated voltage (VBUS) regulation and current sense amplifier
Two high-voltage PFET gate drivers
Two VBUS discharge NFET
System-level fault protection
On-chip OVP, OCP, UVP, and SCP
Supports OTP through integrated ADC circuit
32-bit MCU subsystem
Arm® Cortex®-M0 CPU
64 KB flash
8 KB SRAM
Packages: 24-pin QFN and 16-pin SOIC
Supports extended industrial temperature range (-40 °C to +105 °C)