TLI5012B E1000 | SPI/IIF, GMR, SMD - Infineon Technologies

Overview

XENSIV™ - TLI5012B E1000 angle sensor iGMR, economic with SPI compatible interface

The Infineon TLI5012B E1000 is an 360° angle sensor that detects the orientation of a magnetic field, achieved by measuring sine and cosine angle components with monolithic integrated Giant Magneto Resistance (iGMR) elements. These raw signals (sine and cosine) are digitally processed internally to calculate the angle orientation of the magnetic field (magnet).

Our TLI5012B E1000 is a pre-calibrated sensor, calibration parameters are stored in laser fuses.
At start-up the values of the fuses are written into flip-flops, where these values can be changed by the application-specific parameters.
Further precision of the angle measurement over a wide temperature range and a long lifetime are improved with the internal autocalibration algorithm.

Data communications are accomplished with a bi-directional Synchronous Serial Communication (SSC) that is SPI-compatible.The sensor configuration is stored in registers, which are accessible by the SSC interface.
Additionally the TLI5012B E1000 has Incremental Interface (IIF).

Summary of Features

The TLI5012B E1000 has the following features and pre-configuration.
The configuration can be changed via SSC interface.

Giant Magneto Resistance (GMR)-based principle
Integrated magnetic field sensing for angle measurement
360° angle measurement with revolution counter and angle speed measurement
Max. 1.9° angle error over lifetime and temperature-range with activated auto-calibration
Synchronous Serial Communication (SSC) with 15 bit representation of absolute angle value (0.01° resolution)
Incremental Interface (IIF) with 12 bit resolution of angle value on the output (one count per 0.088° angle step)
Incremental Interface (IIF) in A/B mode with absolut count enabled (provides absolute value at output)
Fast angle update period (42.7μs)
Autocalibration mode 1 enabled
Prediction disabled
Hysteresis set to 0.703°
Bus mode operation of multiple sensors on one line is possible with SSC in open-drain configuration
Diagnostic functions and status information
IFA/IFB/IFC pins set to push-pull output
Bi-directional SSC interface. DATA pin set to push-pull output with 8Mbit/s baud rate (2Mbit/s in open-drain)
IFA/IFB/IFC pins set to strong driver, DATA pin set to strong driver, fast edge
Voltage spike filter on input pads disabled
Two separate highly accurate single bit SD-ADC