Linear Hall IC
are programmable analog or digital sensors for highly accurate angular and linear position detection in automotive and industrial applications
Our TLE499x linear Hall ICs familly is the ideal choice for highly accurate angular and linear position detection and current measurement applications. Our sensors measure the vertical component of a magnetic field and outputs a signal that is directly proportional to the magnetic field. Infineon´s programmable linear Hall sensors come with different interface options PWM, SENT or SPC.
In the field of steering torque sensing, Infineon’s TLE499x series offers highly accurate linear Hall sensors for magnetic torque sensing assembly. In order to support a maximum of compatibility with various Electronic Control Unit (ECU) designs, the TLE499x sensors feature PWM, SENT, SPC or ratiometric analog output. They are available in leaded packages, as well as 1 mm-thick dual- or single-sensor SMD packages.
Our newest member in our broadest XENSIV™ magnetic position sensor portfolio is the world’s first fully ISO 26262-compliant linear Hall sensor for high precision applications. The TLE4999I3 is a dual channel linear Hall sensor with a synchronous digital PSI5-compatible interface, compliant to
ISO 26262, supporting safety requirements on system level rated up to ASIL-D. Our linear Hall IC TLE4999I3 features two highly accurate Hall measurement channels on one chip. A plausibility check of the two redundant channels on system level enables a high diagnostic coverage. Highest accuracy over a wide temperature range and lifetime is achieved by an integrated digital temperature- and stress-compensation.
Side view of innovative stack-mounted dual-sensor technology with bonding wires
Dual-sensor solutions with two redundant sensors in the place of one
Thanks to the use of innovative stack-mounting technology, the devices of the angle sensor family combine two independent sensors within standard and space-saving TDSO packages which are only about 1 mm thick. It has the same width and length as a conventional single-sensor package. Compared to the common approach of side-by-side sensor placement, the advantages of the top-bottom placement include a more homogeneous magnetic field over the sensing elements and a significantly smaller footprint. This saves precious space and cuts down on expense in safety- critical applications, as a lower-cost ferrite magnet can provide a sufficient magnetic field for the sensors.
Productive Programmer @ eHitex
ED FLASH Production Programmer
SPEED FLASH is a proven universal production programmer. The system was designed to be easily configurable for the programming of different targets. A wide range of interfacing techniques to different targets can be used, depending on the requirements of the sensor or microcontroller to be programmed.
Productive Programmer @ CGS
ISCM-SENT Infineon TLE4998x
The CompactRIO ISCM-SENT (Infineon) module developed by CGS can sequentially calibrate up to 2 Infineon TLE4998x sensors with 2 channels each. In addition, the module can read the SENT signals in parallel on the 4 channels.
- Detecting linear and angular position
- Detecting pedal and throttle position
- Steering torque measurement
- Headlight leveling
- High-current sensing
- Seat position and occupant detection
- Suspension control
- Detecting gear stick/lever positions
- Detecting liquid levels in fuel tanks
- Current sensing e.g. for battery management