3-Phase Bridge Driver IC - Arm® Cortex® M3
Infineon´s TLE987x family enables the implementation of advanced motor control algorithms
The MOTIX™ TLE987x family addresses a wide range of smart 3-Phase Brushless DC motor control applications like auxiliary pumps and fans.
It provides an unmatched level of integration and system cost to optimize the target application segments. In addition to this, it offers scalability in terms of flash memory sizes and MCU system clock frequency supporting a wide range of motor control algorithms, either sensor-based or sensor-less. Moreover, the charge pump is capable to drive gate charges up to 150nC per MOSFET under limited conditions
Infineon Developer Community is available 24x7 for you to connect and network with engineers across the globe. Get help from Infineon support engineers, and expert members to solve your design challenges anytime, from anywhere, in any topic, and in your preferred language.
Explore the benefits
- Extensive diagnostics and protections are embedded within the System-on-Chip
- Both the MOTIX™ Embedded Power IC and the external MOSFETs can be protected with a reverse polarity MOSFET
- Monolithic integration minimizes PCB interconnections
- Grade zero variants enable applications up to 175°C ambient
- Minimum number of external components reduce BOM cost, part placing, purchasing and handling, PCB sizing
- Compatible software reduces design costs and enables cost efficient PCB thermal design
- Data processing, actuation and sensing are integrated into a system-on-chip solution with 32 bit Arm® M3 processor
- Due to the platform approach
- Reduced development time
- Temperature scalability
- Solutions up to 1kW
- Simplifies EMC design and improves the EMC performance with slope control
- Pin and software compatible products both for brushless solutions
- Offers intelligent power saving modes including stop and sleep mode, and supports energy management (on demand)
- Intelligent motor control increases efficiency compared to relay based systems
QM-parts in Functional Safety Applications (ASIL)
Infineon`s Embedded Power ICs are developed as QM-parts, but nonetheless can be and are already used in a variety of motor control application that require Functional Safety (ISO26262) up to ASIL-B such as but not limited to Window Lift (ASIL-A), Sunroof (ASIL-A), Auxiliary pumps (ASIL-B) or Engine Cooling Fan (ASIL-B).
Infineon offers the following design-in support for its Embedded Power ICs:
- FIT data information (ISO26262)
- Function/Blocks vs. Area Breakdown
If these data is required, please contact your local Infineon partner who can provide you with these information.
Infineon Embedded Power ICs are supported by a complete development tool chain provided by Infineon and third party vendors. The tool chain includes compilers, debuggers, evaluation boards, LIN low level drivers and configuration tools as well as variety of example software code.
For more information about the tool chain installation steps, watch our video "Toolchain Installation for Embedded Power ICs / TLE98xx".
Download and Install your preferred IDE
Download and Install
Download the SDK
a) via µVision 5 Pack Installer (see step 1)b) from the Keil software packages
and import it to the CMSIS Manager of IAR
*If you still need the Config Wizard V1, please follow the link.
Pack File V1.5.2 for TLE987x SDK
- Added BootROM UM 1.6.0 [EP-1125]
- ADC2: Corrected channel assignment in tle987x.h file comments [EP-919]
- DMA: Corrected DMA Trigger Select for SSCx Transmit in Config Wizard [EP-1014]
- Interrupts: Corrected NMI Map Error in Config Wizard [EP-895]
- SSC: Added 20 MHz option [EP-260]
- Startup: Corrected CMSIS_Irq_Dis when using ARMCC v6 [EP-1040]
- Cleaned MISRA violations [EP-896]
- TLE987x MOTIX Branding + Copyright [EP-936]
- Hall2 example: Updated startup [EP-974]
- UART TTY examples in IAR: Updated examples to work with external terminal [EP-1113]
Additional Tools for Design-in
Embedded Power ICs provide a built-in boot strap loader (BSL) for programming the system-on-chip devices over the built-in LIN transceiver or UART. The uIO Stick acts as an interface between the TLE98xx device and a PC. It handles the BSL protocols as well as the physical layers. A PC application (uIO BSL Tool) provides access to all BSL functions of the Embedded Power device.
Micro Inspector Pro is a graphical visualization tool within Infineon Toolbox to interact with Infineon embedded systems based on Arm® Cortex®-M cores.
Micro Inspector Pro in unregistered mode (without entering a license key) allows the complete usage of existing dashboards. With the registered version, saving a modified or newly created dashboard is possible.
The license key to register can be requested via Infineon support channel: https://www.infineon.com/tac
- The Power Dissipation Tool is an interface that helps you estimate the power dissipation and the temperature of the chip. It is available for the whole Embedded Power IC family.
- The Power Dissipation Tool can be installed via the Infineon Toolbox. If you don`t have the Infineon Toolbox yet, please go to Infineon Toolbox and enjoy the release management for updates.
IHR and Vector are proven partners for drivers and driver configuration tools compatible with Infineon`s range of Embedded Power ICs, and support LIN specifications 1.3, 2.0 and 2.1. The offered solution provides a wide range of options for designers, with reliable testing specifications, intuitive operation, and diagnostic services.
Use our simulation models to understand the behavior of the Embedded Power devices.
- The MOTIX™ TLE986x_7x_BDRV Bridge Driver contains programmable current-driven gate drivers. The MOTIX™ TLE986x_7x_BDRV Bridge Driver PSpice Model provides one gate driver instance as a PSpice subcircuit and covers all first-order effects which are relevant for investigations on timings and power dissipation of the external MOSFETs. The MOTIX™ TLE986x/7x CSA contains the Current Sense Amplifier block.
- The MOTIX™ TLE986x/7x CSA PSpice / Saber / SIMetrix models provide the CSA instance as a PSPICE / Saber / SIMetrix subcircuit, allowing to perform transient and DC sweep analysis. The models include the main parameters in order to properly configure the CSA, as reported in the MOTIX™ TLE986x/7x datasheets and user manuals.
- The IBIS (Input/output Buffer Information Specification) model provides information about the digital inputs/output buffers of the respective projects. The model can be used to perform various board level, signal integrity (SI) simulations and timing analyses.
Together with our partners (Preferred Design Houses) we offer an optimized open market customer support for systems using our Embedded Power products. They are trained to provide application- and product-specific support.
(Free of Charge)
to be agreed between customers and Preferred Design House