SAK-TC399XE-256F300S BD - Infineon Technologies

Overview

Trace, Measurement and Calibration in the target system

The SAK-TC399XE-256F300S BD belongs to the TC39x Emulation Devices, . It has the same feature set as the TC39x standard family with additional debug and tracing capabilities. The TC39xXE offers support for calibration, rapid prototyping, instrumentation and debug/emulation.

TC39xXE is based on TC39x. It can be used to emulate:

TC39x standard devices (6 CPUs)
TC38x standard devices (4 CPUs)

MCDS tracing can be evaluated using the free of charge MCDS Trace Viewer tool which comes with the DAS installation www.infineon.com/DAS

Compatibility

Full compatibility with TC39x standard devices. For TC38x systems the following points need to be considered:

Thermal design and power supply need to support the higher TC39xXE power consumption
SW needs to be tolerant to the different CHIPID and JTAGID values
The upper 12 ASCLIN modules (out of 24) of TC38x may not be used

Summary of Features

6 TriCore running at 300 MHz
16 MB flash/ ECC protection
6,9 MB SRAM/ ECC protection (additional 4 MB EMEM)
1 Gbit Ethernet, 12xCAN FD , 2xFlexRay, 12xLINs, 4xQSP , 2xI²C , 25xSENT, 6xPSI, 2xHSSL, 4xMSC , 1x eMMC/SDIO, GTM, CCU6, GPT12, HSM
LFBGA-516 package
Single voltage supply 5 V or 3.3 V
Temperature : 40°C to 125°C

Emulation Features

4 MB Extension Memory (EMEM) for calibration and tracing (2 MB)
Multi-Core Debug Solution (MCDS)
- Parallel and time aligned trace of cores and busses
- Powerful trigger conditions
- On-chip logic analyzer functions
Additional DAP interface (DAPE) for connecting a second independent tool
Injector for faults and stress (IFS)
Aurora Gigabit Trace (AGBT) support
CPUs have full access to all emulation resources, enabling all kind of interfaces (e.g. Ethernet) as tool connection