CY8CKIT-005

Overview

MiniProg4 Program and Debug Kit

The MiniProg4 Program and Debug Kit is an all-in-one development programmer and debugger for PSoC™ 4, PSoC™ 5LP, and PSoC™ 6 MCU devices. Use MiniProg4 as a programmer or debug probe for supported devices. and development kits, like the PSoC™ 6 WiFi-BT Pioneer Kit.

MiniProg4 uses the industry standard CMSIS-DAP interface over Serial Wire Debug (SWD) protocol. It uses CMSIS-DAP V2.0.0 and V1.2.0 as the bulk and HID endpoints transport mechanisms. MiniProg4 implements USB bulk endpoints for faster communication. It also supports HID endpoints for use cases that require them, but communication is slower. Out of the box, MiniProg4 uses bulk endpoints.

MiniProg4 also provides USB-I2C, USB-SPI and USB-UART bridging functionality. MiniProg4 bridging capabilities are used by tools like CAPSENSE™. Tuner and the Device Firmware Upgrade Tool, delivered with ModusToolbox™ IDE. MiniProg4 support PSoC™ Creator, PSoC™ Programmer, and the Bridge Control Panel is planned.

Connector SWD I2C SPI UART (With and Without Flow Control)
5-pin Yes N/A N/A N/A
10-pin Yes N/A N/A N/A
6x2 header N/A Yes Yes Yes

The CY8CKIT-005 PSoC™ MiniProg4 Program and Debug Kit includes:

  • MiniProg4 programmer/debugger
  • 10-pin ribbon cable
  • USB Type-A to Type-C Cable
  • QuickStart Guide

If your computer has a USB Type-C port, obtain a Type-C to Type-C cable, or a USB Type-A to Type-C adapter, from your preferred supplier.

The MiniProg4 programmer is part of a suite of programming solutions available for PSoC™ users.

Support