Infineon brings ready-to-use multicopter solutions to a high-potential, emerging market. As a leading semiconductor company, we offer a complete system solution that includes every essential semiconductor, from power electronics, to controllers, to securities, to authentication, to sensors.
For multicopters, flying is the most critical application in terms of performance, efficiency and control. At Infineon, we cover all relevant aspects and address your precise needs, allowing you to design a highly-efficient multicopter capable of what counts most for consumers: long airtime. Here, the control is the soul of the system and our cutting-edge technologies and portfolio let you achieve a higher degree of innovation and differentiation. Additionally, our state-of-the-art security solutions can help establish a brand’s identity and help ensure brand protection.
Multicopters system diagram
Multicopter solutions from Infineon
In Infineon’s comprehensive portfolio of high quality products, you’ll find the widest spectrum of multicopter components on the market. We offer everything from XMC-controllers, to iMotion motor control, to magnetic sensors, and more – with the exception of one commodity, an IMU (inertial measurement units) for existing solutions. Take a moment to discover our game changing products.
As a key player in leading-edge projects for autonomous vehicles and advanced sensor solutions, we at Infineon offer game changing products, such as our 3D time of flight sensors, radar sensors, barometric pressure sensors, and 3D magnetic sensors.
- The XMC4500 flying control board offers a full system solution for multicopter
- Up to 1MB Flash memory and 160kB RAM
- Math calculation and DSP capabilities for flight cruise control
- Outstanding analog/mixed signal features for open source inputs
- Interface for GPS (breakout board)
- Bluetooth interface possible (breakout board)
- High resolution pressure sensor for altitude stabilization
- Authentication with ORIGA™ onboard
Development effort & cost reduction
Security & authentication
|Accuracy & easy control||
A glance into the future
In the fast-growing multicopter market, Infineon is showing signs of quickly becoming a one-stop-shop for existing drone applications. Why? Research and development for multicopters offers many synergies with projects such as autonomous driving and unmanned aerial vehicles, both of which could potentially revolutionize the market and our daily lives.
In years to come, as energy efficiency and reliability grow in importance, and as new capabilities push the limits of power management and reliability, Infineon is ready to assist you in designing the next generation of unmanned aerial vehicles.
Power and Sensing Selection Guide 2018
00_00 | Feb 19, 2018 | PDF | 23.91 mb
Infineon's full system solutions for multicopters
01_00 | Nov 08, 2017 | PDF | 524 kb
Selection guide battery powered motor drives
02_00 | Jun 27, 2017 | PDF | 1.5 mb
Application Brochure Multicopter
04_00 | Nov 08, 2017 | PDF | 913 kb
At the heart of the system is the flight controller, which is built around an Infineon XMC4500 ARM® Cortex®-M4 32-bit microcontroller. IR2301 drivers, low-voltage MOSFETs and MPU9250 Invensense inertial measurement unit (IMU) provide the additional units that make up the electronic powertrain, motor control and flight sensing functional blocks.
The iMOTION™ modular application design kit (MADK) evaluation platform covers motor drive applications up to 1 kW. Using iMOTION™ MADK standardized M1 platform interface, different control and power boards can be combined in a system that perfectly matches the requirements of the application. This modular approach allows developers a maximum in flexibility and scalability during the evaluation and development phases at affordable cost.
Infineon EVALSHNBV01 sensor hub nano hosts one DPS310 barometric pressure sensor and a XMC1000 32-bit ARM Cortex-M0 MCU. The sensor hub nano has an integrated battery and Bluetooth 4.0 to communicate wirelessly to PC or Android™ smart phones wirelessly, thanks to integrated Bluetooth™ 4.0 and battery. Infineon sensor hub nano can be used for quick testing and evaluation of DPS310 in the final application and it works as a platform to develop Android apps.
Infineon KITDPS3102GSHV02 wireless sensor hub 2.0 can read sensor values and transmit them to a PC via Bluetooth 4.0. or USB interfaces. The hub features the XMC 4500 µController, USB and Bluetooth interfaces, two ports with four I2C channels each and one port with an SPI interface. The hub has two independent voltage supplies for the sensors, a LiPoBattery controller and a small 85×55mm footprint.
The XMC1000 and XMC4400 motor control application kits are ready-made evaluation kits for three phase drives. These two kits are best suited to customer looking for a motor control plug & play experience. Both kits have a similar setup with a microcontroller board, the respective 24 V power board including n-channel OptiMOS™ power transistors and a three-phase gate driver EiceDRIVER™ from Infineon, rounded off with a brushless DC motor. The kits are supported by the DAVE™ motor control apps library, including sinusoidal and block commutation as well as various position detection and sensing schemes with encoder, hall sensors and shunts. The XMC4400 motor control application kit also includes a resolver interface.
This development kit allows the user to implement and test several sensing applications at the 24 GHz ISM band such as FMCW distance measurement, Doppler based movement detection, Doppler based direction of movement detection, and Doppler based speed measurements of targets. The kit consists of the BGT24MTR11 transceiver MMIC and a XMC4200 32-bit ARM® Cortex®-M4 for signal processing and communication via USB.
S2Go pressure DPS310 is an Arduino shield including one DPS310 barometric pressure sensor. It comes together with a ready-to-use Arduino library and it is pin-to-pin compatible with the Infineon XMC2Go MCU board. By using the Infineon Shield 2Go Adapter it can be easily connected to different Arduino boards thereby, easily developing system solutions. Infineon’s MyIoT adapters are gateways to external hardware solutions like Arduino and Raspberry PI being popular IoT hardware platforms. All this enables the fastest evaluation and development of IoT system.
Development of a full system solution
Find an answer to your question
Technical Assistance Center (TAC)
Infineon welcomes your comments and questions.
If you have any questions concerning our products, please fill out the following form. Your inquiry will be sent to the appropriate specialist who will be in touch with you as soon as possible.
You will receive a confirmation E-mail to validate your address in our system. Any attached file to the reply which will help to support your inquiry is highly appreciated.