Multicopters and drones
Infineon brings ready-to-use drone solutions to a high-potential, emerging market. As a leading semiconductor company, we offer a complete system solution that includes every essential semiconductor, from power electronics, to controllers, to securities, to authentication, to sensors.
For drones and multicopters, flying is the most critical application in terms of performance, efficiency and control. At Infineon, we cover all relevant aspects and address your precise needs, allowing you to design a highly-efficient multicopter capable of what counts most for consumers: long airtime. Here, the control is the soul of the system and our cutting-edge technologies and portfolio let you achieve a higher degree of innovation and differentiation. Additionally, our state-of-the-art security solutions can help establish a brand’s identity and help ensure brand protection.
Drone and multicopter solutions from Infineon
In Infineon’s comprehensive portfolio of high quality products, you’ll find the widest spectrum of drone and multicopter components on the market. We offer everything from controllers like AURIX™ and XMC™, to iMotion motor control, to XENSIV™ sensors such as pressure, radar and magnetic and more – with the exception of one commodity, an IMU (inertial measurement units) for existing solutions. Take a moment to discover our game changing products.
As a key player in leading-edge projects towards autonomous flying vehicles solutions, we at Infineon offer game changing products, such as our XENSIV™ sensor portfolio of 3D time of flight sensors, radar sensors, barometric pressure sensors, and 3D magnetic sensors. Our AURIX™ microcontrollers are the controllers of choice in the automotive industry towards autonomous driving applications. With CoolGaN™ we have the technology of choice in our portfolio, that will deliver cutting edge efficiency in driving motors of drones/multicopters.
Drone and multicopter system diagram
- The XMC4500 flying control board offers a full system solution for multicopter
- Up to 1MB Flash memory and 160kB RAM
- Math calculation and DSP capabilities for flight cruise control
- Outstanding analog/mixed signal features for open source inputs
- Interface for GPS (breakout board)
- Bluetooth interface possible (breakout board)
- High resolution pressure sensor for altitude stabilization
- Authentication with ORIGA™ onboard
Development effort & cost reduction
Security & authentication
|Accuracy & easy control||
Innovative drone solutions with AURIX™ and CoolGaN™
Infineon AURIX™ microcontrollers and CoolGaN™ e-mode HEMTs deliver outstanding performance and the highest energy efficiency levels. Equipped with sixteen motors for full redundancy, AURIX™ ensures complete flight control by simultaneously driving all electronic speed controllers (ESCs). The TriCore™ architecture enhances the safety, security and reliability of different multicopter applications while Infineon’s CoolGaN™ HEMTs enable highly efficient motor control. Accompanied by an appropriate driver IC portfolio, these cutting edge technologies open up new dimensions in speed, precision and flight times.
A glance into the future
In the fast-growing multicopter market, Infineon is showing signs of quickly becoming a one-stop-shop for existing drone applications. Why? Research and development for multicopters offers many synergies with projects such as autonomous driving and unmanned aerial vehicles, both of which could potentially revolutionize the market and our daily lives.
In years to come, as energy efficiency and reliability grow in importance, and as new capabilities push the limits of power management and reliability, Infineon is ready to assist you in designing the next generation of unmanned aerial vehicles.
At the heart of the system is the flight controller, which is built around an Infineon XMC4500 ARM® Cortex®-M4 32-bit microcontroller. IR2301 drivers, low-voltage MOSFETs and MPU9250 Invensense inertial measurement unit (IMU) provide the additional units that make up the electronic powertrain, motor control and flight sensing functional blocks.
The iMOTION™ modular application design kit (MADK) evaluation platform covers motor drive applications up to 1 kW. Using iMOTION™ MADK standardized M1 platform interface, different control and power boards can be combined in a system that perfectly matches the requirements of the application. This modular approach allows developers a maximum in flexibility and scalability during the evaluation and development phases at affordable cost.
Infineon EVALSHNBV01 sensor hub nano hosts one DPS310 barometric pressure sensor and a XMC1000 32-bit ARM Cortex-M0 MCU. The sensor hub nano has an integrated battery and Bluetooth 4.0 to communicate wirelessly to PC or Android™ smart phones wirelessly, thanks to integrated Bluetooth™ 4.0 and battery. Infineon sensor hub nano can be used for quick testing and evaluation of DPS310 in the final application and it works as a platform to develop Android apps.
The XMC1000 and XMC4400 motor control application kits are ready-made evaluation kits for three phase drives. These two kits are best suited to customer looking for a motor control plug & play experience. Both kits have a similar setup with a microcontroller board, the respective 24 V power board including n-channel OptiMOS™ power transistors and a three-phase gate driver EiceDRIVER™ from Infineon, rounded off with a brushless DC motor. The kits are supported by the DAVE™ motor control apps library, including sinusoidal and block commutation as well as various position detection and sensing schemes with encoder, hall sensors and shunts. The XMC4400 motor control application kit also includes a resolver interface.
This development kit allows the user to implement and test several sensing applications at the 24 GHz ISM band such as FMCW distance measurement, Doppler based movement detection, Doppler based direction of movement detection, and Doppler based speed measurements of targets. The kit consists of the BGT24MTR11 transceiver MMIC and a XMC4200 32-bit ARM® Cortex®-M4 for signal processing and communication via USB.
S2Go pressure DPS310 is an Arduino shield including one DPS310 barometric pressure sensor. It comes together with a ready-to-use Arduino library and it is pin-to-pin compatible with the Infineon XMC2Go MCU board. By using the Infineon Shield 2Go Adapter it can be easily connected to different Arduino boards thereby, easily developing system solutions. Infineon’s MyIoT adapters are gateways to external hardware solutions like Arduino and Raspberry PI being popular IoT hardware platforms. All this enables the fastest evaluation and development of IoT system.
Solution Finder – your guide to a successful design
Use our Solution Finder to quickly and easily find, compare and purchase the right semiconductors for your project. Simply select your application and the online tool visualizes suitable components in useful system diagrams, which you can customize to your needs.
You can already access 400 solutions for motor control and drive applications in our tool. Coming soon: solutions for lighting, power supplies and other applications.