Integrated solutions for factory sensors
In today’s high-tech factories, industrial sensors play an integral role in processing systems’ precision and reliability. But the sensors must be durable enough to perform in an industrial environment – and small enough for the very limited space on an integrated printed circuit board (PCB). An additional challenge to cope with: degradation effects, for instance, in light barriers. For high-quality industrial sensors semiconductors with an optimum price-performance ratio, Infineon is the top choice. Our broad spectrum of suitable solutions offers all products you need – from one top-grade source.
See what’s possible with our XMC1000 family of microcontrollers. Their unique security features are sure to exceed your expectations. Infineon is pleased to use our in-depth knowledge of industrial sensors applications to help develop the right solutions for your system. Another plus: we offer reference designs specifically for industrial sensors, such as the 24GHz chipset for radar level meters.
Industrial sensors system diagram
This application board enables you to test the IFX81481ELV high efficiency synchronous step-down DC/DC controller.
It is equipped with IFX81481ELV and is pre-adjusted to an output voltage of 5.6V. The application board enables the user to test the performance with two different configurations of the current limit. The board is fully equipped with external components, including two high performance MOSFET switches.
This application board enables you to test the performance of the IFX90121 basic buck converter.
It is equipped with a IFX90121EL V50 with a fixed 5V output voltage. The application board for the IFX90121 enables the user to test the performance of the low Iq, 5V buck converter. The board is fully equipped with external components.
This application board enables you to test the performance of the IFX91041 basic buck converter. It is equipped with a IFX91041EJV for variable output voltages (preadjusted to 4.8V). The board offers several options to modify the schematic and also the possibility to drive LEDs.
Multi-purpose buck controller for external PMOS switch, 5V or adjustable output voltage, maximum of 2.3A output current, low quiescent current.
The HITFET™ Demoboards are a small PCB where a engineering sample is already mounted with a 6 cm² copper cooling area. All device pins can be directly accessed for customer measurements
XMC1000 Motor Control Application Kit
Implements TLV5012B angle sensor enabling accurate rotor position detection. MCU board with XMC1300 and detachable SEGGER J-Link debug interface - Motor Board: 12 – 24V, up to 3A, On board 3-phase motor (24V, 15W) with hall sensors, Optional encoder interface.
Smallest, fully featured evaluation kits - The 3D Magnetic Sensor 2GO is a budget-priced evaluation board equipped with a magnetic sensor for three dimensional measurement combined with an ARM® Cortex™-M0 CPU. The 3D Magnetic Sensor 2GO has a complete set of on-board devices, including an on-board debugger. Build your own application and gadget with the 3D Magnetic Sensor 2GO.