Automatic gate and door opening systems
Requirements for today’s automatic door opening systems
Sliding doors, gates, garage doors, and shutters: these are just a few examples on a growing list of things requiring automatic door opening systems in home and industrial settings. In particular, the harsh exterior environment, including temperature extremes and humidity, presents design challenges. Furthermore, you must consider user safety features, such as anti-pinch, and security features. Ideally, your automatic door opening system design should be free of audible noise.
Automatic door opening and closing system diagram
Robust and reliable solutions from Infineon
To overcome challenges common to an automatic door opening and closing system, refer to Infineon’s broad portfolio of scalable products and solutions. Our offer accommodates a wide range of requirements, regardless of voltage or power. Along with us, you can create compact, efficient noise-free designs that are as robust as they are reliable. Our product offer includes integrated protection and diagnostic features, such as current sensing, as well as innovative sensor solutions for index counting. Today connectivity is a hot topic and our easy-to-integrate security offer preps your designs for integration into smart homes. We are also your one-stop shop for sensors, microcontrollers and power ICs. Browse our solutions to find the best solution for your automatic door opening system design.
iMOTION™ MADK power boards
Avnet KNX Stack Development Solution
The bus system KNX has evolved to become one of the most important solutions in the field of home and building electronic systems. It is an approved European (EN) and International (ISO) standard. The KNX Standard defines a complex communication protocol that requires a significant investment in terms of both implementation and certification.
|KIT_XMC11_BOOT_001||XMC1100 Microcontroller in TSSOP-38 with 64 KB Flash and full peripheral set of XMC1100 series.|
|H-BRIDGE KIT 2GO||The H-Bridge Kit 2GO is a ready to use evaluation kit. It is fully populated with all electronic components equipped with the H-Bridge IFX9201 combined with an ARM® Cortex™-M0 CPU. It is designed for the control of DC motors or other inductive loads up to 6 A or up to 36 V of supply.|
|EVAL-2QR0665G-28W16V||28 W switching mode power supply evaluation board designed in a quasi resonant flyback converter topology using ICE2QR0665G quasi resonant CoolSET™. With CoolMOS™ integrated in this IC, it greatly simplifies design and layout of the PCB.|
|EVAL-2QR2280G-1||20 W switching mode power supply evaluation board designed in a quasi resonant flyback converter topology using ICE2QR2280G-1 quasi resonant CoolSET™.|
|DC-MOTORCONTR_BTN8982||Our DC motor control shield is one of the first high current motor control boards being compatible to Arduino as well as to Infineon’s XMC1100 Boot Kit. The DC motor control shield is capable to drive two uni-directional DC motors (half bridge configuration) or one bi-directional DC motor (H-Bridge configuration).|
Find an answer to your question
Technical Assistance Center (TAC)
Infineon welcomes your comments and questions.
If you have any questions concerning our products, please fill out the following form. Your inquiry will be sent to the appropriate specialist who will be in touch with you as soon as possible.
You will receive a confirmation E-mail to validate your address in our system. Any attached file to the reply which will help to support your inquiry is highly appreciated.